Panasonic Matrix Switcher Wj Sx150a Operating Instructions

84
■Tour Sequence
This window configures the parameters of tour sequences:
the operating camera, dwell time*, preset position** in each
step.
Each sequence has up to 64 steps, and up to 32
sequences are configurable.
The configuration of a tour sequence can be copied to
another one.
*the display time of a camera image
** the panning/tilting position which has been preset in
advance
Notes: 
•Enter the parameters from Step 1 in a sequential order. 
If you skip a step, it will result in an error.
•After...

85
■Group Sequence
This window configures the parameters of group
sequences.
Each group sequence has up to 4 tour sequences which
are assigned to the monitors.
●How to Display
To display this window, click on the  (Group
Sequence) button in the main window (p. 80).
●Parameters
Mon 1 - Mon 4
Selects the tour sequence displayed on each monitor.
(Tour Sequence) button
Displays the Tour Sequence window for the tour sequence
configuration.
(Save Exit) button
Saves the configuration and closes the Group...

86
■Camera Cleaning
This window configures the parameters of camera cleaning
function:  the schedule (daily, weekly or monthly) and cam-
eras to be cleaned.
●How to Display
To display this window, click on the  (Camera
Cleaning) button in the main window (p. 80).
●Parameters
• Camera Auto Cleaning
Checking on the box will enable the configuration.
• Schedule Mode Group
Check on the desired box for the auto cleaning configura-
tion.
Daily: To execute the cleaning at a desired time every
day, check on this...

87
Notes:
•When the camera cleaning is active, cleaning will begin
from LCN 1 in numerical order.
•Surveillance is impossible during the cleaning.
•The cleaning cannot be stopped after it is started.
■Daylight Saving Time/Summer
Time
This window configures the parameters of daylight saving
time. 
●How to Display
To display this window, click on the  (Daylight Saving
Time/Summer Time) button in the main window (p. 80).
●Parameters
• Enable
Checking on the box will enable the configuration.
• Date Group
1....

88
ON:The alarm-associated sequence/spot image is dis-
played on a monitor, and alarm recording will start
(if a recorder is connected to the unit).
REC ONLY:Only an alarm recording will start and
monitors will keep displaying the current sequence/
spot images.
Note:You cannot recover alarm-related operations
from system controllers when REC ONLY is
selected.
OFF:An alarm input is accepted neither via the CAM-
ERA IN connectors nor the RS-485 ports.
The factory default setting is OFF.
Alarm Port
This...

89
• Auto Reset Time
Select the time to reset the alarm input. 
The selectable time: OFF (not resetting the alarm), 10, 20,
30, 40, 50, 60, 120 or 180 (seconds)
The factory default setting is 30 sec.
(Save Exit) button
Saves the configuration and closes the Alarm Mode win-
dow.
(Cancel Exit) button
Cancels the configuration and closes the Alarm Mode win-
dow.
■Alarm Event
This window configures the details of operation parameters
when an alarm signal is input: the monitor and mode to dis-
play the alarm...

90
REC
This stands for a recorder activated with an alarm signal.
(Refer to the diagram in p. 68.)
Alarm Port
Select the unit whose alarm port is activated with an alarm
signal. Master or Slave 1/2/3/4 is selectable.
Num
Select the alarm port number. 1 to 16 is selectable. To
deactivate the alarm event, select “- -”.
Notes:
•If having selected a tour sequence for a monitor, anoth-
er tour number or spot camera will not be available
when selecting the monitor for another alarm event.
That will result in...

91
●Parameters
• Operator Number
This box displays a list of registered operators.
1-6:These are operator numbers who are registered as
the factory default setting. Operator Number 1 can-
not be deleted.
Timer:This operator is used for the priority change of a
timer event. When the timer events priority is higher
than that of an operator, the event is valid. When an
operators priority is higher than that of a timer
event, the event is invalid. This operator cannot be
deleted.
• Add Operator Number
This...

92
■Monitor Selection
This window determines whether a system controller or PC
can select a monitor.
●How to Display
To display this window, click on the  (Monitor
Selection) button in the main window (p. 80).
●Parameters
Select OK to permit each controller and the PC to control
Monitor 1 to 4.
Select NG to restrict each controller and the PC to control
Monitor 1 to 4.
(Save Exit) button
Saves the configuration and closes the Monitor Select win-
dow.
(Cancel Exit) button
Cancels the configuration and...

93
■Time & Date
This window configures the units clock display pattern. The
units clock time is also adjustable.
This picture is the example for U. S. model.
Out of the U. S., the display pattern is Date/Month/Year.
●How to Display
To display this window, click on the (Clock) button in
the main window (p. 80).
●Parameters
• Display Format
The current date & time is displayed.
Click on the drop-down menu and select the display pat-
tern format.
The date display is selectable from 5 patterns.
The time...