Panasonic Matrix Switcher Wj Sx150a Operating Instructions

125
Refer to the system controller’s operating instructions
before you login the system. After the log-in procedure, the
following operations are available to control the system.
The operation begins with selecting a monitor, then the
selected camera appears the active monitor.
■ Monitor Selection
Unit addresses are given to each monitor. 
Mon 1 Mon 2 Mon 3 Mon 41234
The following is how to select a monitor.
1. Press the numeric button(s) to select the desired moni-
tors unit address.
2. Press the UNIT...

126
■ Tour Sequence
The following functions are available if a tour sequence has
been previously configured through SETUP MENU or WJ-
SX150A Administrator Console. Any tour sequence can be
assigned to any monitors.
1. Select the desired monitor. (Refer to p. 125 Monitor
Selection.)
2. To select the desired tour sequence number, press the
numeric buttons.
3. Press the SEQ button to run the tour sequence in the
forward direction on the active monitor.
4. Press the SEQ PAUSE button to pause a tour sequence...

127
The procedure described below lets you determine on-screen display (OSD) items, such as camera title, clock and status, on
and off on the active monitor screen.
Before controlling each item, monitor selection is necessary. (Refer to p. 125 Monitor Selection.)
1. Press the SHIFT button, and then press the numeric buttons corresponding to the function code. 
(Refer to the table.)
2. Press the FUNCTION button. The function will be executed.
Notes:
•Alarm History Table doesnt have a function code. When...

128
■Resetting All the Alarm Inputs
You can reset all the alarm input signals at a time. 
1. Select a monitor which displays ALARM.
(Refer to the figure on p. 118.)
2. Press the ALM RESET button.
All the alarms will be reset.
Then, the LED display and indicators will return to the
state before the alarm input.
Note:You cannot reset the alarm input signals one by one.
■Suspending All the Alarm Inputs
Use this function when you do not want to be disturbed by
an alarm input, for example, during the setup...

129
EXPANDED FUNCTION 

130
WJ-HD500 SERIES CONTROL (TERMINAL MODE)
Matrix switcher can control Digital Disk Recorder WJ-
HD500 Series. The following is the procedure of WJ-HD500
Series SETUP MENU.
Notes:
•The following operating procedures are for the terminal
mode. If you are using a PS·Data system controller,
refer to p. 141.
•When a Multiplexer board is installed in the unit, you
can neither connect nor control a WJ-HD500 Series
recorder. You need to remove the board from the unit.
■Displaying WJ-HD500 Series
SETUP MENU
To...

131
■Controlling Digital Disk
Recorder WJ-HD500 Series
The following are the operating procedures of WJ-HD500
Series via system controller.
Note: Refer to the operating instructions of Digital Disk
Recorder WJ-HD500 Series for details.
●Recorder Mode
Before operating the recorder, it is necessary to enter the
recorder mode.
1. Select the desired monitor. (Refer to p. 106 Monitor
Selection.)
2. To select a recorder, press the corresponding numeric
button.
Recorder Numeric button
Master recorder 0 (You can...

132
•To move forward/backward field advance during
the pause, move the joystick rightward/leftward, or
press REW/FF button.
Joystick to R (B)/STEP ( ):Forward field
advance
Joystick to L (A)/STEP ( ):Backward field
advance
•To skip to the previous/next record during the play-
back, move the joystick upward/downward. (Refer
to the recorder’s operating instructions for the
description of record.) 
Joystick to UP (D):Skips to the previous record.
Joystick to DOWN (C):Skips to the next record.
•To display...

133
• Record List/Thumbnail Display
You can operate the Record List or Thumbnail Display by
referring to the recorder’s operating instructions. In addi-
tion, the following operations from the system controllers
are also available.
Joystick to UP (D):Moves the cursor up.
Joystick to DOWN (C):Moves the cursor down.
Joystick to L (A):Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
CAM(SET) button:Displays the search editing area./Starts
the search after you enter the search...

134
●Multiscreen Sequence
Digital disk recorder starts a sequence according to the
setting of WJ-HD500 Series.
1. Enter the recorder mode (Refer to p. 131 Recorder
Mode.)
2. Press the button 7 while holding down the SHIFT but-
ton.
3. To cancel the sequence, press the button 0 while hold-
ing down the SHIFT button.
The display will change into the multiscreen display.
●Other Operations
SHIFT + ZOOM TELE buttons: Selects a group to be
played back. 
SHIFT + ZOOM WIDE buttons:Changes the display mode
of the...