Panasonic Kx-tvs90 Voice Processing System Installation Manual

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 271
Table 59 
Parameter Value Range
(Default)Description/Function
System Prompt
Selection
Number1-9
(None)Assigns a selection number (1-9) to each prompt. Callers 
use the numbers to select the desired language for their 
message prompts. This setting is required when either one 
or both of the following parameters are set to Selective.
Port Assignment—Incoming Call Service Prompt 
Authorization of External Message Delivery—Prompt 
Mode
Example:
For service...

SYSTEM ADMINISTRATORS GUIDE
272 Installation Manual
B6.6 System Caller Name Announcement
Up to 120 Caller ID numbers can be assigned to announce prerecorded Caller ID caller names 
when extension users listen to messages from the assigned numbers left in their mailbox. 
Extension users can also hear caller names when the VPS forwards calls from the assigned 
numbers to them (Caller ID Screening). The recorded caller names will also play when the 
callers use the Intercom Paging features; the recorded...

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 273
System Caller Name Announcement-Delete
Deletes specified Caller ID List numbers from the list.
System Caller Name Announcement-Listing
Displays all Caller ID List numbers.
B6.7 Other Parameters
Other Parameters-Extension Numbering Plan
Specifies the extension numbers of the PBX so that the VPS is able to recognize the dialed 
extension as valid. This setting promotes the call handling of the Automated Attendant Service. 
We recommend that this parameter...

SYSTEM ADMINISTRATORS GUIDE
274 Installation Manual
Table 61 
Parameter Value Range
(Default)Description/Function
Numbering 
Plan
1-162-5 digits 
consisting
of 0-9, X
(Numbering 
Plan
1: 1XX;
Numbering Plan
2-16: None)Specifies the first 1 or 2 digits of the PBX extension 
numbers. You can add up to 16 entries to the list. Each entry 
can contain 2-5 digits 0-9, and a letter X which matches 
any digit. Extension numbers cannot begin with 0.
Examples:
a) If valid PBX extension numbers are to be specified...

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 275
Other Parameters-Dialing Parameter
To access the proper menu for Dialing Parameter, follow the menu path as shown:
System Administration Top Menu-1-5-7-2
Table 62 
Parameter Value Range
(Default)Description/Function
Number of 
Digits
to Access
Outside Line0-8 digits
(1)Specifies the number of digits necessary to access an 
outside (CO) line.
Example:
If the PBX requires callers to dial 9 to access an 
outside (CO) line, this parameter should be set as...

SYSTEM ADMINISTRATORS GUIDE
276 Installation Manual
Other Parameters-Message Waiting Notification
Controls the handling of message waiting notification calls. Outgoing Call
Setup 
SequenceUp to 12 digits 
consisting of
0-9,  , #, F, R, S, T, 
W 
(T)Specifies the sequence of codes used by the VPS when 
calling a CO line. You can set up to 12 digits. The 
default value is T. T indicates that the system will 
dial the telephone number only after detecting a dial 
tone.
Example:
9W = (9) - 1-s wait - dial...

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 277
Message 
Waiting Lamp 
PortsPort No.
(1-2)Specifies the port numbers used for the Message Waiting 
Notification Lamp feature. 
The VPS turns on the Message Waiting Lamp of the 
extension using the port specified in this parameter. At 
least 1 port must be specified.
Message 
Waiting Lamp 
for Every 
Message1. No
2. Yes
(Yes)If set to Yes, the VPS will turn on the Message Waiting 
Lamp of the extension each time a new message is 
recorded in the mailbox....

SYSTEM ADMINISTRATORS GUIDE
278 Installation Manual
Other Parameters-External Message Delivery
Controls the handling of External Message Delivery calls.
To access the proper menu for External Message Delivery, follow the menu path as 
shown:
System Administration Top Menu-1-5-7-4
Table 64 
Parameter Value Range
(Default)Description/Function
Retry Times 0-9 times
(3)Specifies the number of times to attempt an external 
message delivery call when the destination is busy or if 
there is no answer.
Busy...

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 279
Other Parameters-Call Hold
To access the proper menu for Call Hold, follow the menu path as shown:
System Administration Top Menu-1-5-7-5
Table 65 
Parameter Value Range
(Default)Description/Function
Call Hold 
Mode1. Disable
2. Enable 
(Enable)If set to Enable, the VPS gives callers the option of 
either holding for a specific extension or selecting one of 
several Incomplete Call Handling service options.
While on hold, the VPS periodically gives...

SYSTEM ADMINISTRATORS GUIDE
280 Installation Manual
Other Parameters-Rotary Telephone Service
Specifies how to treat callers who are calling from rotary telephones (unable to input touchtone 
signals) or who are unable to properly respond to VPS guidance.
Other Parameters-Intercom Paging Parameter
Intercom Paging is a PBX feature that makes it possible to page the callers party through 
telephone speakers. To utilize this feature, the PBX must have the Intercom Paging feature 
available and the VPS must...