Panasonic Kx-tvs90 Voice Processing System Installation Manual

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 231
B3 SYSTEM ADMINISTRATION—SETTING COS 
(CLASS OF SERVICE) PARAMETERS
The COS-Class of Service parameters define the set of services that are available to mailbox 
owners. A maximum of 64 (1-64) classes can be specified. A class of service number can be 
assigned for each mailbox. More than 1 subscriber can share the same class of service.
COS number 63 is only available to the Message Manager while COS number 64 is only 
available to the System...

SYSTEM ADMINISTRATORS GUIDE
232 Installation Manual
Table 40 
Parameter Value Range
(Default)Description/Function
Personal 
Greeting 
Length8-60 s in 4 s 
increments
(16)Defines the maximum length of the personal greeting 
message that can be recorded by the subscriber.
This parameter applies to:
Personal greeting on No Answer
Personal greeting on Busy
Personal greeting for After Hours
Personal greeting for Caller ID
New Message 
Retention Time1-30 days
(5)Defines the number of days that an unplayed...

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 233
Message 
Scanning with 
Information1. Yes
2. No
(No)If set to Yes, the VPS adds the message senders name 
and the recording date and time to the message during 
the message scan.
Play System
Prompt after
Personal 
Greeting1. Yes
2. No
(No)If set to Yes, directions for recording a message are 
given to the caller immediately after the personal 
greeting has been played.
The following guidance messages are played:
 To end recording, hang up or press 1 for...

SYSTEM ADMINISTRATORS GUIDE
234 Installation Manual
Direct Mailbox
Access1. Yes
2. No
(Yes)If set to Yes, a subscriber is able to directly enter 
Subscriber Service. This is accomplished by calling a 
VPS extension directly from the subscribers extension. 
The Subscriber Service Access Code (  and mailbox 
number) need not be dialed. Password entry may be 
required if specified beforehand.
Note: The Direct Mailbox Access feature is available if 
APT/DPT Voice Mail Integration is activated with a...

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 235
Remote Call 
Forward to CO1. Yes
2. No
(No)If set to Yes, Remote Call Forwarding can be set to an 
outside (CO) line; a subscriber can program (either from 
a remote location or on-site) his extension to forward 
various types of calls to either Telephone No.1 or 
Telephone No.2 (preprogrammed in the Mailbox 
Setting), or to any other telephone number.
Note: The Remote Call FWD to CO feature is available 
if DPT Voice Mail Integration is activated with...

SYSTEM ADMINISTRATORS GUIDE
236 Installation Manual
Beeper 
Callback
No. Entry 
Mode
1. Caller Select
2. Without
3. Before
4. After
5. Disable
(Disable)Permits subscribers to use the Callback Number Entry 
feature.
Caller 
Select:After recording a message, the caller is 
asked if the message is urgent. If urgent, the 
caller is asked to enter the callback number.
Without: Without recording a message, the caller is 
asked to enter the callback number.
Before: Before recording a message, the VPS asks 
the...

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 237
COS Nos. 63 & 64 (for Managers)
Prompt Mode1. System
2. User 1
3. User 2
4. Selective
(User 1)When an external message is delivered, the receiver will 
be greeted by the VPS in the specified language 
(prompt). However, if Selective is enabled, then the 
receiver has a choice of prompts. See related explanation 
in Incoming Call Service Prompt in Table 23 in 
5.3.1 Port Service Menu.
Note: When Selective is enabled and the receiver uses 
a rotary...

SYSTEM ADMINISTRATORS GUIDE
238 Installation Manual
Only the parameters listed below can be assigned for COS numbers 63 and 64. COS number 
64 cannot assign the parameters relating to the Message Waiting Notification and the Remote 
Call Forward to CO features.To access the proper menu for Class of Service Numbers 63 & 64 for Managers, 
follow the menu path as shown:
System Administration Top Menu-1-2-COS No.(63-64)
Table 41 
Parameter Value Range
(Default)Description/Function
New Message
Retention...

SYSTEM ADMINISTRATORS GUIDE
Installation Manual 239
Message
Scanning with
Information1. Yes
2. No
(No)If set to Yes, the VPS adds the message senders name and 
the recording date and time to the message during the 
message scan.
Prompt Mode 1. System
2. User 1
3. User 2
(User 1)Specifies the language used for voice prompts.
Note: If User 1 or User 2 is specified as Prompt Mode but 
not recorded by the Message Manager, the VPS will 
automatically play the factory-recorded System prompts in 
English....

SYSTEM ADMINISTRATORS GUIDE
240 Installation Manual
Beeper 
Callback
No. Entry 
Mode
1. Caller
 Select
2. Without
3. Before
4. After
5. Disable
(Disable)Permits the Message Manager to use the Callback Number 
Entry feature.
Caller 
Select:After recording a message, the caller is asked 
if the message is urgent. If urgent, the caller is 
asked to enter the callback number.
Without: Without recording a message, the caller is 
asked to enter the callback number.
Before: Before recording a message, the VPS...