Panasonic Kx-tvs50, Kx-tvs80 Voice Processing System Installation Manual

7.4 TROUBLESHOOTING GUIDE
SYSTEM MAINTENANCE AND TROUBLESHOOTING
161
Unable to make 
reconnection when the line is 
busy.• Improper setting of the busy 
signal reconnection procedure.• Readjust the busy signal 
reconnection procedure to that 
of the connected PBX.
Unable to make a no-
response reconnection.• Improper setting of the no-
response reconnection 
procedure.• Readjust the no-response 
reconnection procedure to that 
of the connected PBX. Ta b l e  3 0  
PROBLEM PROBABLE CAUSE POSSIBLE SOLUTION 

7.5 SPECIFICATIONS
162SYSTEM MAINTENANCE AND TROUBLESHOOTING
7.5 SPECIFICATIONS
Table 31 
Port: 2 Digital/Analog ports
Dialing Method: DTMF/Pulse (10/20 pps)
Flash Time: 100/300/600/900 ms (programmable)
CPC Detection 6.5/150/300/450/600 ms (programmable)
Type of Line: Loop start minimum Loop Current: 20 mA
 minimum Line Voltage: 7 V DC
 minimum Ringing Voltage: 40 V AC
Extension Numbering: 2 to 5 digits (programmable)
Pause Time: 1 to 9 s (programmable)
Message Waiting Lamp: Programmable DTMF sequence....

7.5 SPECIFICATIONS
SYSTEM MAINTENANCE AND TROUBLESHOOTING
163
Dimensions (H   W   D): 173   318   65 mm {6-13/16   12-1/2   2-9/16}
Mass (Weight): Approx. 1.2 kg {2.7 lb.}Table 31  

7.5 SPECIFICATIONS
164SYSTEM MAINTENANCE AND TROUBLESHOOTING 

SYSTEM FEATURES 165
Appendix A
SYSTEM FEATURES 

A1 SYSTEM FEATURES 
166SYSTEM FEATURES 
A1 SYSTEM FEATURES 
The Voice Processing System has many features that are available to the system administrator, 
the system manager, and/or system subscribers. The tables on the following pages list and 
briefly describe each key VPS system feature. In addition, references to specific sections of this 
manual and the Subscriber Guide are provided in the reference column that pertains to each 
feature listed. The specific procedure steps required to initiate,...

A1 SYSTEM FEATURES
SYSTEM FEATURES 
167
Auto Forwarding forwards or copies messages not retrieved 
from one mailbox to another, after a specified 
period of time. This service is only available 
to subscribers. Class of Service programming 
determines the mailboxes that can use this 
feature. Messages marked as private cannot 
be forwarded.• See Private Message in this 
Ta b l e .
• See Authorization for Auto 
Forwarding in Table 37 in 
B3 SYSTEM 
ADMINISTRATION - 
SETTING COS (CLASS OF 
SERVICE)...

A1 SYSTEM FEATURES 
168SYSTEM FEATURES 
Call Services include a series of both incoming and 
outgoing call services.
Incoming Call Services - Automated 
Attendant Service, Voice Mail Service, 
Interview Service, Custom Service.
Outgoing Call Services - Message Waiting 
Notification, and External Message Delivery.• See Port Service Setting in 
5.1.3 Starting the Quick 
Setup.
• See Incoming Call Service in 
Table 22 in 5.3.1 Port Service 
Menu.
• See Incoming Call Service in 
Table 39 in B4.1 Port...

A1 SYSTEM FEATURES
SYSTEM FEATURES 
169
Caller Name 
Announcement-
Personal (APT/DPT 
Integration Only) allows subscribers to assign up to 30 Caller 
ID numbers and record a caller name for each 
Caller ID number from their telephone. The 
caller name is announced when subscribers 
listen to the messages from assigned numbers 
left in their mailbox. It is also announced 
when calls from assigned numbers are 
transferred from the VPS to the subscribers 
(Caller ID Screening.)
Caller ID Screening is...

A1 SYSTEM FEATURES 
170SYSTEM FEATURES 
Calling a Beeper allows a subscriber to be notified by a beeper 
when he has a message(s). If the beeper has a 
display, it is possible to send to it a callback 
number. The callback number can be 
recorded when a caller leaves a message. If 
the caller does not leave a callback number, 
the System Callback No., or the callers 
number if it is received through a telephone 
companys Caller ID service, will be sent 
instead.
To utilize this feature, follow the...