Panasonic Kx-tvs50, Kx-tvs80 Voice Processing System Installation Manual

B2 SYSTEM ADMINISTRATION - MAILBOXES
SYSTEM ADMINISTRATORS GUIDE
201
To display the list of all mailbox numbers, follow the menu path as shown:
System Administration Top Menu - 1 - 1 - 4 

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
202SYSTEM ADMINISTRATORS GUIDE
B3 SYSTEM ADMINISTRATION - SETTING COS 
(CLASS OF SERVICE) PARAMETERS
The COS - Class of Service parameters define the set of services that are available to 
Subscribers. A maximum of 64 (1-64) classes can be specified. A class of service number can 
be assigned for each mailbox. More than 1 Subscriber can share the same class of service.
•
COS number 63 is only available to the Message Manager while COS...

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
SYSTEM ADMINISTRATORS GUIDE
203
Class of Service Setting
COS Nos. 1-62 (for Subscribers)
To access Class of Service Numbers 1-62 for Subscribers, follow the menu path as 
shown:
System Administration Top Menu - 1 - 2 - COS No. (1-62)
Ta b l e  3 7  
Parameter Value Range
(Default)Description/Function
Personal 
Greeting 
Length8-60 s in 4 s 
increments
(16)Defines the maximum length of the personal greeting 
message that can be recorded...

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
204SYSTEM ADMINISTRATORS GUIDE
Message 
Retrieval
Order1. LIFO
2. FIFO
(LIFO)Specifies the order in which messages are retrieved 
(played back for listening).
1. LIFO - Messages retrieved from most to least recent.
2. FIFO - Messages retrieved from least to most recent.
Message 
Scanning with 
Information1. Yes
2. No
(No)If set to Yes, the VPS adds the message senders 
information, recording date, and time to the message 
during message...

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
SYSTEM ADMINISTRATORS GUIDE
205
Direct Mailbox
Access1. Yes
2. No
(Yes)If set to Yes, a Subscriber is able to directly enter the 
Subscriber Service. This is accomplished by calling a 
VPS extension directly from the Subscribers extension. 
The Subscriber Service Access Code ( + mailbox 
number) should not be dialed. Password entry may be 
required if specified beforehand.
Note: The Direct Mailbox Access feature is available if 
APT/DPT...

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
206SYSTEM ADMINISTRATORS GUIDE
Authorization 
for Message 
Notification1. Yes
2. No
(No)If set to Yes, Subscribers are able to utilize the 
Message Waiting Notification feature. The sub-
parameters to be set include Beeper Callback No. Entry 
Mode, MWL Notification for Unreceived Message, and 
Device Notification for Unreceived Message. If set to 
No, sub-parameters cannot be assigned.
Note: This parameter in COS No. 1 is set to Yes...

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
SYSTEM ADMINISTRATORS GUIDE
207
Device 
Notification for 
Unreceived 
Message
1. Yes
2. No
(No)When this parameter has been set to Yes and when 
unplayed messages remain, the system calls the 
appropriate device in numerical order until all unplayed 
messages are received.
Authorization 
for External 
Message 
Delivery1. Yes
2. No
(No)When set to Yes, Subscribers are able to utilize the 
External Message Delivery feature. The...

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
208SYSTEM ADMINISTRATORS GUIDE
COS Nos. 63 & 64 (for Managers)
Only the parameters listed below can be assigned for COS numbers 63 and 64. COS number 
64 cannot assign the parameters relating to the Message Waiting Notification feature.To access Class of Service Numbers 63 & 64 for Managers, follow the menu path as 
shown:
System Administration Top Menu - 1 - 2 - COS No. (63-64)
Table 38 
Parameter Value Range...

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
SYSTEM ADMINISTRATORS GUIDE
209
Prompt mode 1. System
2. User 1
3. User 2
(User 1)Specifies the language used for voice prompts.
Note: If User 1 or User 2 is specified as Prompt Mode but 
not recorded by the Message Manager, the VPS will 
automatically play the factory recorded system prompts in 
English. By default, both User 1 and User 2 prompts are not 
recorded.
Authorization 
for Message 
Notification1. Yes
2. No
(Yes)When set to...

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
210SYSTEM ADMINISTRATORS GUIDE
Device
Notification for 
Unreceived 
Message
1. Yes
2. No
(No)When this parameter has been set to Yes and when 
unplayed messages remain, the system calls the appropriate 
device in numerical order until all unplayed messages are 
received.Table 38 
Parameter Value Range
(Default)Description/Function