Panasonic Kx Tva50 Installation Manual

9.You may now begin programming the VPS. To choose the area you would like to begin programming, click
the desired icon in the Shortcuts menu.
Note
•To connect to the VPS via LAN, first connect to the VPS via USB and set the appropriate LAN settings.
Refer to 1.9.13  Utility—LAN Settings in the Programming Manual.
• To connect to the VPS via modem, refer to 1.5.4  Connect—Dial-up (Modem) (Optional) in the
Programming Manual.
• If programming the VPS for the first time, the Quick Setup utility can help...

Programmer Levels and PasswordsThere are two levels of access to the KX-TVA Maintenance Console: Installer and User. Each level has a
programmer code, which is required to start KX-TVA Maintenance Console, and a password, which is required
to access the VPS using KX-TVA Maintenance Console.
The Installer level provides access to all VPS programming parameters and should only be used by the System
Administrator.LevelDefault Programmer CodeDefault PasswordRestrictionsInstallerINSTALLER *11234*2No...

Section  4
PBX Programming for APT/DPT Integration
This section explains how to configure compatible
Panasonic PBXs to use APT/DPT Integration with the
VPS.Document Version  3.0  2010/06Installation Manual93 

4.1  Guidelines for APT/DPT Integration
4.1.1  What is APT/DPT Integration? In order for the VPS to function, it must be integrated with the PBX it serves. The type of integration that is
used determines how voice (caller messages, VPS prompts, etc.) and data (extension status, button presses,
etc.) are sent between the VPS and the PBX.
Unlike Inband Integration, when the VPS and PBX use APT or DPT Integration, information is sent between
the PBX and VPS digitally. This allows the VPS to respond quickly...

FeatureDescription
Compatible
Integration TypeAPTDPTCaller Name
Announcement Over
Intercom PagingAfter receiving Caller ID information from the telephone
company, the VPS announces the caller ’s name and the
trunk (CO line) number.
üü
Intercom Paging *2The VPS can page subscribers through built-in speakers
and external paging equipment. If a Caller ID caller’s
name has been previously recorded for the Caller Name
Announcement Feature, the caller’s name will be
announced at the end of the page.
üü
Live...

FeatureDescription
Compatible
Integration TypeAPTDPTDID Call Routing *1The VPS automatically sends calls from preprogrammed
DID numbers to the specified extension, mailbox, or
Custom Service.
—ü
Remote Call Forwarding
SetThe subscribers and the Message Manager can program
their extensions from a remote location to forward
various types of calls to a desired extension or an outside
telephone.
—ü
Time SynchronizationWhenever the PBX sets a new date and time or when
DPT Integration is established, the data...

4.2  KX-TDE, KX-TDA, and KX-TAW Series PBX
Programming for DPT Integration The screen shots shown in this section are for the KX-TDA200. Programming procedures and
availability may vary by PBX model, software version, etc. Refer to the documentation included with
the PBX or consult your dealer for more information.
A group of DPT ports of the PBX connected to a VPS with DPT Integration is called a  "VM (DPT) Group ". Each
VM (DPT) Group consists of a maximum of 12 ports (24 channels) of the VPS,...

2.Assignment of VM (DPT) extension ports
a. Go to the  Configuration-Extension Port  screen. Follow the procedure below for the extension port
which you want to assign as a VM port.
b. Set the port’s  Connection to OUS .
c. Select the attribute of  DPT Property-Type to VM (DPT) .
d. Assign  DPT Property-VM Unit No.  and DPT Property-VM Port No. . Incoming calls will hunt starting
at the lowest VM Port number.
e. Click  Apply  to save the changed data.
f. Set the port’s  Connection to INS .
3. Program the...

Example Settings (1)
Program the PBX so that all trunk (CO line) calls are directed to the VPS (DIL feature).
1. Go to the  CO & Incoming Call-DIL Table & Port Setting  screen.
2. Assign the  DIL Destination  for each time mode and trunk (CO line) to a floating extension number (VPS
Port).
3. Click  Apply  to save the changed data.
Calls received on the assigned trunks (CO lines) will be directed to the VPS. The VPS will answer those calls
using the service (AA, VM, Custom Service, etc.) assigned to each...

Example Settings (2)
Program the PBX to direct incoming trunk (CO line) calls to an operator, and to then direct those calls to the
VPS when the operator does not answer.
1. Program the PBX so that incoming trunk (CO line) calls are directed to an operator (DIL feature).
a. Go to the  CO & Incoming Call-DIL Table & Port Setting  screen.
b. Assign the  DIL Destination  for each time mode and trunk (CO line) to a specific extension number
(operator extension).
c. Click  Apply  to save the changed data....