Panasonic Kx Tva50 Installation Manual

Example Settings (3)
Program the PBX to direct incoming trunk (CO line) calls to an Incoming Call Distribution (ICD) group, and to
then direct those calls to the VPS when they are not answered.
1. Program the PBX so that incoming trunk (CO line) calls are directed to an ICD group (DIL feature).
a. Go to the  CO & Incoming Call-DIL Table & Port Setting  screen.
b. Assign the  DIL Destination  for each time mode and trunk (CO line) to a specific extension number
(floating extension number of the ICD...

d.Click  Apply  to save the changed data.
3.Program the PBX so that it will direct overflowed calls to the VPS.
a. Go to the  Groups-VM(DTMF) Group-System Setting  screen.
b. Select  None, Answer by Mailbox , or AA as the parameter for  Intercept Routing to the VPS
Sequence .
This parameter determines which DTMF command the PBX will send to the VPS in order to select the
desired service (AA, VM, Custom Service, etc.). If using a Custom Service, select  None.
142Installation ManualDocument Version  3.0...

c.Click  Apply  to save the changed data.Document Version  3.0  2010/06Installation Manual1435.3 KX-TDE, KX-TDA, and KX-TAW Series PBX Programming for Inband Integration  

5.4  KX-TA824 PBX Programming for Inband
Integration The instructions in this section are for programming a KX-TA824 via the Operating and Maintenance Tool. To
program a KX-TA824 using the Manager Extension, follow the instructions for KX-TA series PBX programming
by referring to 5.7  KX-TA Series PBX Programming for Inband Integration.
1. Go to the  1.System - 2.Main  screen.
2. Under  Voice Mail , select DTMF Integration , then select each extension jack that is connected to the VPS.
Click  Apply  to...

5.Set the Extension Hunting type for the VPS extension groups to  Circular. Click Apply to save the changed
data.
6. Go to the  2.Extension - 2.Feature Settings  screen.
Document Version  3.0  2010/06Installation Manual1455.4 KX-TA824 PBX Programming for Inband Integration  

7.Enable Data Line Security for each extension connected to the VPS. Click  Apply to save the changed
data.
8. Program the appropriate trunk (CO line) feature settings depending on how your customer plans to use
the VPS: a) to answer all incoming calls, b) as an operator backup, or c) to only answer calls not answered
by user extensions.
a. If the VPS is answering all calls:
Go to the  3.CO - 1.Line Mode  screen. Program all lines DIL to the first extension of the Voice Mail
hunt group. The PBX will...

Go to the 3.CO - 2.Incoming / Outgoing  screen. Program lines to ring operator extensions immediately
for all time modes. To give the operator (extension 101 in this example) time to answer the call before
the VPS picks up, we recommend setting the delay to a few seconds for each extension connected to
the VPS. Set a different delay time for each extension connected to the VPS. Finally, go to the  3.CO -
1.Line Mode  screen and set all trunk (CO line) types to  Normal. Click Apply to save the changed...

for each extension connected to the VPS. Finally, go to the 3.CO - 1.Line Mode screen and set all
trunk (CO line) types to  Normal. Click Apply to save the changed data.148Installation ManualDocument Version  3.0  2010/065.4 KX-TA824 PBX Programming for Inband Integration   

5.5  KX-TD Series PBX Programming for Inband
Integration For KX-TD500 programming, refer to 5.6  KX-TD500 PBX Programming for Inband Integration.
DPT Integration is recommended when using the VPS with the KX-TA1232, KX-TD816, or KX-TD1232,
however, Inband Integration is necessary when the software version of the PBX does not support DPT
Integration.
Programming procedures and availability may vary by PBX model, software version, etc. Refer to the
documentation included with the PBX or consult your dealer...

5.6  KX-TD500 PBX Programming for Inband
Integration DPT Integration is recommended when using the VPS with the KX-TD500, however, Inband Integration is
necessary when:
• the PBX has available SLT ports but no available DPT ports.
• the cards installed in the PBX or the software version of the PBX do not support DPT Integration.
Programming procedures and availability may vary by PBX model, software version, etc. Refer to the
documentation included with the PBX or consult your dealer for more...