Panasonic Kx Tva50 Installation Manual

Port/Trunk settings
The next window displayed is the Port/Trunk window.
Configure Service Groups for each port/trunk (CO line), then click  Next. For more information, refer to
2.3.1  Service Group in the Programming Manual.
Document Version  3.0  2010/06Installation Manual1716.1.2 Quick Setup  

Date and Time setting
The last window displayed is the date and time setting window.
Set the date and time, then click  Finish.
172Installation ManualDocument Version  3.0  2010/066.1.2 Quick Setup  

Finalizing Quick Setup
Click  Yes to save the settings and finish Quick Setup. If you click  No, your settings will not be saved and you
will return to the previous screen.
If you clicked  Yes, the following screen is displayed as your settings are saved.
When Quick Setup is completed, the following screen will be displayed.
Note
•If the VPS is connected to a KX-TD500, restart the VPS to bring the VPS online.
Document Version  3.0  2010/06Installation Manual1736.1.2 Quick Setup    

If Auto Configuration is skippedMailbox settings
If you skip Auto Configuration, the next window displayed is the Mailbox Edit window.
Edit, delete, or add mailboxes as needed, then click  Next. For more information, refer to 2.1.3  Mailbox
Parameters in the Programming Manual.
Note
•The Mailbox Edit window allows you to set basic mailbox parameters only. Detailed mailbox settings
can be made after  Quick Setup has finished, by clicking the  Mailbox Settings icon under Shortcuts.
174Installation...

Port/Trunk settings
The next window displayed is the Port/Trunk window.
Configure Service Groups for each port/trunk (CO line), then click  Next. For more information, refer to
2.3.1  Service Group in the Programming Manual.
Document Version  3.0  2010/06Installation Manual1756.1.2 Quick Setup  

Date and Time setting
The last window displayed is the date and time setting window.
Set the date and time, then click  Finish.
176Installation ManualDocument Version  3.0  2010/066.1.2 Quick Setup  

Finalizing Quick Setup
Click  Yes to save the settings and finish Quick Setup. If you click  No, your settings will not be saved and you
will return to the previous screen.
If you clicked  Yes, the following screen is displayed as your settings are saved.
When Quick Setup is completed, the following screen will be displayed.
Note
•If the VPS is connected to a KX-TD500, restart the VPS to bring the VPS online.
Document Version  3.0  2010/06Installation Manual1776.1.2 Quick Setup    

6.2  Centralized Voice MailMultiple KX-TDE or KX-TDA series PBXs connected in a private network can share the services of the VPS
when it is connected to one of the networked PBXs using DPT integration. Mailbox numbers and extension
numbers stored in the VPS can be up to 8 digits long, allowing you to create mailboxes for extensions of PBXs
in the private network.
Note
•Centralized Voice Mail is compatible with KX-TDE series (PMMPR version 2.0 or higher, and LPR
version 5.0 or higher) and KX-TDA series...

6.2.1  Changing the Mailbox No. Length ModeBy default, if both 3-digit and 4-digit extension numbers are used by the PBX, the VPS will use 4-digit mailbox
numbers. When creating mailbox numbers for 3-digit extensions, a  "0" will be added to the end of each mailbox
number. However, it is possible to program the VPS to allow mailbox numbers of mixed length by entering a
special command using the Commands dialog in the KX-TVA Maintenance Console.
To change the Mailbox No. Length Mode, follow the...

180Installation ManualDocument Version  3.0  2010/066.2.2 Changing the Maximum Length of Mailbox Numbers