Panasonic Kx Tva50 Installation Manual

Note•Specify the extension group number (126 or 127 by default) to which VM or AA extension
groups have been assigned. Group numbers 1 to 128 are available to the VPS through
additional programming.
e. Click  Apply  to save the changed data.
f. Set  Status  to INS .
3. Assignment of the extension line to be connected to the VPS
a. Go to the  4-2 Extension Line 1/2  screen.
b. Set  Data Line Mode  to Yes .
c. Click  Apply  to save the changed data.
Document Version  3.0  2010/06Installation Manual1515.6...

Note•This program prevents the VM port from being interrupted by the call waiting, hold recall, and
executive busy override features during a call.
4. Settings for the trunk (CO line) features
Program the appropriate trunk (CO line) feature settings depending on how your customer plans to use
the VPS.
• The VPS answers all incoming trunk (CO line) calls promptly.
See Example Settings (1) later in this section.
• The VPS answers when the operator does not take the call after a specified number of rings....

Example Settings (1)
Program the PBX so that all trunk (CO line) calls are directed to the VPS (DIL feature).
1. Go to the  4-1 Trunk Line  screen.
2. Assign the  Destination  for each time mode and trunk (CO line) to a specific extension number (VPS port).
3. Click  Apply  to save the changed data.
Note
•Specify the FDN for the extension group to which VM or AA has been assigned.
• In order to utilize the Caller ID features, you must set  Caller ID to Enable .
Document Version  3.0  2010/06Installation...

Example Settings (2)
Program the PBX to direct incoming trunk (CO line) calls to an operator, and to then direct those calls to the
VPS when the operator does not answer.
1. Program the PBX so that incoming trunk (CO line) calls are directed to an operator (DIL feature).
a. Go to the  4-1 Trunk Line  screen.
b. Assign the  Destination  for each time mode and trunk (CO line) to a specific extension number.
c. Click  Apply  to save the changed data.
Note
•Specify the FDN for the extension group to which...

Note•Specify the FDN for the extension group to which VM or AA has been assigned.
3.Set the number of rings before a call is considered to be unanswered and therefore forwarded to the VPS
(Intercept Routing No Answer timer).
a. Go to the  2-4 System Timer 1/2  screen.
b. Assign the  Intercept Time  parameter.
Document Version  3.0  2010/06Installation Manual1555.6 KX-TD500 PBX Programming for Inband Integration  

c.Click  Apply  to save the changed data.156Installation ManualDocument Version  3.0  2010/065.6 KX-TD500 PBX Programming for Inband Integration  

Example Settings (3)
Program the PBX to direct incoming trunk (CO line) calls to an extension or group and to then direct those calls
to the VPS when they are not answered.
1. Program the PBX so that incoming trunk (CO line) calls are directed to an extension or group (DIL feature).
a. Go to the  4-1 Trunk Line  screen.
b. Assign the  Destination  for each time mode and trunk (CO line) to a specific extension number.
c. Click  Apply  to save the changed data.
2.Program the PBX so that unanswered calls...

Note•Specify the FDN for the extension group to which VM or AA has been assigned.
3.Program the amount of time that passes before unanswered calls are redirected to the VPS (Intercept
Routing No Answer timer).
a. Go to the  2-4 System Timer 1/2  screen.
b. Assign the  Intercept Time  parameter.
158Installation ManualDocument Version  3.0  2010/065.6 KX-TD500 PBX Programming for Inband Integration  

c.Click  Apply  to save the changed data.Document Version  3.0  2010/06Installation Manual1595.6 KX-TD500 PBX Programming for Inband Integration  

5.7  KX-TA Series PBX Programming for Inband
Integration
Note •The KX-TA824 can also be programmed via PC using the Operating and Maintenance Tool. Refer to
5.4  KX-TA824 PBX Programming for Inband Integration for more information.
• For KX-TA1232 programming, refer to 5.5  KX-TD Series PBX Programming for Inband Integration.
APT Integration is recommended when using the VPS with a KX-TA series PBX, however, Inband Integration
is necessary when:
• the PBX has available SLT ports but no available APT...