Panasonic Kx Tva50 Installation Manual

4.Mount the AC adaptor as shown.Document Version  3.0  2010/06Installation Manual812.15.2 Wall Mounting the AC Adaptor  

Wall Mounting Template for AC AdaptorPlease copy this page and use as a reference for wall mounting the KX-TVA50.
Note•When you print out this page, the dimensions of the wall mounting template may deviate slightly from
the measurements indicated in the template. Confirm that the markings on the printed page reflect the
measurements indicated in the template.
82Installation ManualDocument Version  3.0  2010/062.15.2 Wall Mounting the AC Adaptor83 mm
(3-1/4 in.)Install a screw here.
Install a screw here.  

Please copy this page and use as a reference for wall mounting the KX-TVA200.
Note•When you print out this page, the dimensions of the wall mounting template may deviate slightly from
the measurements indicated in the template. Confirm that the markings on the printed page reflect the
measurements indicated in the template.
Document Version  3.0  2010/06Installation Manual832.15.2 Wall Mounting the AC AdaptorInstall a screw here. Install a screw here.
110 mm
(4-5/16 in.)  

84Installation ManualDocument Version  3.0  2010/062.15.2 Wall Mounting the AC Adaptor 

Section  3
Installing KX-TVA Maintenance Console
This section explains how to install KX-TVA
Maintenance Console on a PC.Document Version  3.0  2010/06Installation Manual85 

3.1  OverviewAfter wall mounting and connecting the VPS to the PBX, you can begin programming the VPS. This
programming should be performed by the installer, using the KX-TVA Maintenance Console software. This
software can be used to set system parameters, change system prompts, diagnose system functions, etc.
KX-TVA Maintenance Console supports connection to the VPS via USB, LAN, and modem. For details on how
to connect the PC to the VPS, see 2.9  PBX Connections. For detailed information on all...

3.2  KX-TVA Maintenance Console InstallationSystem programming, diagnosis, and data upload/download can be performed with a PC using the KX-TVA
Maintenance Console software.
System Requirements Required Operating System
Microsoft ®
 Windows ®
 2000, Windows XP Professional Service Pack 2, Windows Vista ®
 Business Edition,
Windows 7 32-bit Professional Edition, or Windows 7 64-bit Professional Edition
Minimum Hardware Requirements for Windows 2000, Windows XP
CPU:  1.2 GHz Intel ®
 Pentium ®...

Installing KX-TVA Maintenance Console1.Copy the KX-TVA Maintenance Console setup file to a local drive on the PC. (Its icon is
shown here, on the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the installation wizard.
4. Click  Yes when prompted to copy the USB drivers, specify a location, then click  OK.
5. Click  OK after the drivers have been copied to the local drive.
6. Click  Finish .
Note
•To install or uninstall the software on a PC...

3.3  Starting KX-TVA Maintenance ConsoleThe instructions listed below explain how to start KX-TVA Maintenance Console. These instructions are for
when connecting to the VPS via USB.
Note
•The screenshots shown here are for reference only, and may differ from the screens displayed on your
PC.
1. Click the  KX-TVA Maintenance Console  shortcut icon.
2.Select the appropriate VPS model and click  OK.
3. The Enter Programmer Code dialog box is displayed. Enter the installer level programmer code (default:...

5.The main window is displayed.
6.Click  Connect  ®  USB  from the menu bar, or click  Connect on the toolbar, select  USB in the  Connection
Mode  dialog box and click  Next.
Note
•To connect to the VPS via USB, the  KX-TVA USB driver must be installed on the PC, as explained
in "3.2  KX-TVA Maintenance Console Installation".
7. Enter the installer level password (default: 1234), then click  Next.
Note
•The installer level password (also called the administrator password) is required to access...