Panasonic Kx-T123211d Installation Manual

Description 
By plugging output unit such as a printer with RS-232C, record of all incoming and outgoing calls, the contents registered 
in System Programming and System Working Report can be confirmed. 
n Information prints out on outside line calls. 
l Starting time of call (Date, time) 0 Dialed number 
l Extension number 0 Duration time of call 
l CO number 0 Account code 0 Transfer mark “x” 
l DISA Security Code 
. 
Example of print out 
Date Time 
EXT. CO Dial Number 
Duration Code 
I 81201 a8...

(Carriage return for a new line) 
until the desired code appears 
(Baud rate) 
:........................................... until the desired baud rate appears 
- IlOB 
1508 
300B 
600B 
1200B . . . . . 
. . . . . . . . . default 
2400B 
48008 
_ 96008 
(Word length) 
; . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired 
(Parity) 
!........... 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired mode appears 
_ 
None 
Mark...

Carriage return for a new line 
A new line code indicates what type of code is 
needed for the print head on a printer to move the 
first character position on the next line. 
when “CR+LF”is required from 
when “CR” is required from a printer. 
CR=Carriage Return 
LF=Line Feed. 
Baud rate 
A baud rate code indicates the data transmission 
speed from the system to a printer. 
Parity 
1lOB 
150B 
300 B 
600 B 
1200 B 
2400 B 
4800 B 
9600 B when 110 baud is required. 
when 150 baud is required. 
when 300...

Programming 
1. Dial (23). 12. 
“RS232C Parameter” will be displayed. 
2. Press the NEXT button. 
“NL-Code 
: CR + LF” will be displayed and 
“CR+ LF” will blink. 13. 
14. 
3. Press the SELECT button to alternate 
between “CR + LF” and “CR” to select the 
desired mode. 
15. 
4. 
. Press the MEMORY button. 
The LCD will stop blinking. 
5. Press the NEXT button. 
“Baud Rate : 1200B” will be displayed and the 
“1200B” will blink. 16. 
17. 
6. Repeat pressing the SELECT button until the 
desired baud rate is...

(Page length) 
(Skip perforation) 
Page length 
The page length may be selected to position a 
title and data on each page. 
A page length code indicates the numbe’r of 
lines per page. 
A title will be printed on the first 3 lines of each 
page. 
4 
99 4 lines per page 
99 lines per page 
STANDARD CONTINUOUS PAPER(ll inches) 
paw 
length 
I 0  0 66 lines z 
_~ ____....._......._ ‘6’ 
0 
0 
0 t 0 
0 
0 
0 
z machine 
perforations E  0 skip 
perforation 
To print data, page length must be longer than...

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
until the desired mode appears 
[ Outgoing : On __ to print outgoing calls __ default 
Outgoing : Off __ to stop printing 
, . . . . 
until the desired mode appears 
[ Incoming : On __ to print incoming calls __ default 
Incoming : Off __ to stop printing 
00ti00~0~ 25 NEXT SELECT MEMORY NEXT SELECT MEMORY END 
Description 4. 
It is possible to print outgoing calls or 
. 
incoming calls or both. 
5. 
Programming 
1. 
2. 
3. Dial (25). 
“Duration...

0 stop output 
i..............‘.‘..- until the Stop Output appears 
l All Parameters ,..................................... 
i until desired data dump mode appears 
0 System Parameter 
l Speed Dial 
o CO Parameter (Outside) - All 
Para . . . . . . . . . . . . . . . . . . . . . . . . default 
System Para 
co Para 
EXT Para 
DSS Para 
Speed Dial 
- stop 
output 
................. until the CO Para appears 
i . . . . . . . 
1 ABEN : to assign the same on all 12 CO’s 
mliJ: on CO 01 
i 1 m:onCO12 
El~nn~nn...

Description 
Six separate printouts are available. 
They are (1) System parameters (2) 
CO 
parameters (3) Extension parameters (4) DSS 
parameters (5) Speed dial and (6) All parameters 
System parameters 
Day/ Night 
Trunk group assignments 
Extension number assignments 
Extension group assignments 
Hunting.group 
Operator extension 
DSS console set 
DSS operation mode 
Doorphone receive extensions 
Area type 
Speed dial restriction 
Operator call class 
Area code of class-3 
Exchange code of class-5...

Do not disturb 
Call forwarding 
Call waiting 
Data line security 
Dial call pickup deny 
Absent message 
Timed reminder 
Station lock 
Pickup dial 
DSS parameters 
Console type 
Pair extension 
DSS connection 
DSS button assignment 
Feature button assignment 
Speed dial 
Speed access codes (00 through 99) in 
which phone numbers are stored may be 
printed. 
All parameters 
System parameters 
CO parameters 
Extension parameters 
DSS parameters 
Speed Dial 
Operation 
To stop the printout ; 
1. Dial (27)....

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired time app&& 
Instantly 
5s after dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . default 
1 OS after dial 
-_ .: 
~IINEXTIISELECTIIMEMORY 15s after dial 
. 
Description Example: 
The duration time of the conversation is 10 seconds after dialing 
displayed on the LCD and is printed on the 
= ~l1NEXTIISELECTIIMEMORY] 
printer. 
Program the starting time of the record. 
Programming Table 
l...