Panasonic Kx-T123211d Installation Manual

,..............until the desired external paging equipment number (1 or 2) appears 
I 
_........................... , until the-desired mode appears 
Enable- 
. ..-...default (external pagingj and 2) 
Disable 
=& 
Description 6. Repeat steps 3 to 5, to program the access tone 
The acknowledge tone that is heard after 
accessing the external paging equipment can be 
removed or added at the customer’s request. 
Refer to “Paging-External” on page 4-25. 
Programming 
1. 
2. 
3. 
4. 
5. Dial (29). 
“Ext-Pag...

Description Programming 
Direct Inward System Access (DISA) is the 
feature that enables outside line incoming calls to 
be directed to an extension phone by designating 
it or to an outside line through the KX-Tl23211. 
When programmed, the following contents of 
DISA can be set up. 
n Control code “ * ” 
Sets to ignore the signal of ‘I*” key. 
n Prolong Time 
. Sets duration time of talking past CO-to-CO 
Duration Time Limit when dialing out on an 
outside line (2, 3, 4 or 5 minutes) 
n Answer Delay...

14. Press the NEXT button. 
“Tone Detect” will be displayed. 
15. Press the SELECT button. 
“Tone Det: Enable” will be displayed and 
“Enable” will blink. 
16. Press the SELECT button to alternate between 
“Enable” and “Disable” to select the desired 
mode. 
17. Press the MEMORY button. 
The LCD will stop blinking. 
16. Press the NEXT button. 
“Security Type” will be displayed. 
19. Press the SELECT button. 
“Trunk Security” will be displayed and blink. 
20. Repeat pressing the SELECT button until the...

until the desired mode appears 
~............~I 
. 
Description 
Enables a standard telephone installed outside the 
premise to work as an extension in the premise 
through public or private lines. 
Optional Off Premise Extension (OPX) Card 
KX-T123285 and Unit KX-T123286 are 
necessary. 
Programming 
1. Dial (32). 
“OPX Feature” will be displayed. 
2. Press the NEXT button. 
“OPX: Disable” will be displayed and 
“Disable” will blink. 
3. Press the SELECT button to alternate between 
Enable and Disable...

until the desired mode appears 
. 
Description 
Allows an extension user to intrude through the 
speaker into another extension that is in 
conversation using the handset. 
(This feature only is available when KX-T123235 
sets are used.) 
Programming 
1. Dial (33). 
“OHCA Feature” will be displayed. 
2. Press the NEXT button. 
“OHCA: Enable” will be displayed and 
“Enable” will blink. 
3. 
4. 
5. Press the SELECT button to alternate between 
Enable and Disable to select the desired mode. 
Press the...

until the desired mode appears 
Dump Start . . . . . . . . - - default 
Dump Stop 
SWR Data Clear 
. 
I 
Description Programming 
Dial (34). 
KX-Tl23211 automatically records the working 
state of System. 1. 
“Working Report” will be displayed. 
The recording starts when the System Working 
Report is cleared. 
Programming this feature enables to clear the 
record or output the records of working state to 
SMDR. 2. 
3. Press the NEXT button. 
“Dump Start” will be displayed and blink. 
Repeat pressing the...

I Description 
You can program which outside line is 
connected and which one is not connected. 
When an extension automatically selects an 
idle outside line, the extension can be 
connected to it quickly. 
Outside Line Feature 
......... until the desired CO number (01 through 12) appears. 
until the desired mode appears 
Connect 
. . ..-......default (all 12 Cd’s) 
Not Connect 
i. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . /I@= 
q : to assign the same on all 12 CO’s 
ml?J :onCOOl 
lij~l...

!.....................-unti I the desired CO number (01 through 12) appears 
, ...................................... 
until the desired dial mode appears 
;.................................................... . . 
DTMF Mode . . . . . . 
default (all 12 CO’s) 
Pulse Mode 
Call Blocking Mode 
AB= q : to assign the same on all 12 CO’s 
lolj?J : on CO 01 
! 
nr;il :onCO12 
Description 
Allows the user to select the dialing mode (tone, 
pulse or call blocking) of each CO (Central Office) 
line. 
DTMF Dial...