Panasonic Kx-T123211d Installation Manual

When you connect EMSS PROPRIETARY TELEPHONE (KX-T61631, KX-T61630, KX-T61620, KX-T61650, 
KX-T30830, KX-T30825, KX-T30820 or KX-T30850) to the KX-T123211 system, change the programming of CO 
button or DSS button to have them operate properly. 
The default of CO button or DSS button is assigned as following. 
l In case of KX-T61631, KX-T61630, KX-T61620 and KX-T61650, 
1 CO button on which ‘COl” is printed CO1 Line 
CO button on which “CO2” is printed CO2 Line 
CO button on which “C03” is printed CO3...

Examples 
The outside lines of KX-T123211 is connected 8 CO’s from Central Office (CO). 
Extension No 105 (Jack No. 05) is set up beforehand by System Programming as followings. 
System Programming 
Flexible Outward Dialing Assignment 
(Both Day and Night Mode) 
Flexible Ringing Assignment 
(Both Day and Night Mode) CO1 through CO7 are “Enable” 
CO8 is “Disable”. 
CO1 through CO7 are “Enable” 
CO8 is “Disable”. 
r Trunk Group 1 : COl, C02, CO3 
If you connect KX-T30820 at Extension 105 (Jack No. 05) and...

If you connect KX-T30820 at Extension 105 (Jack No. 05) and set the CO button of KX-T30820 as shown in Fig. 
2, Outgoing calls and Incoming calls in Extension 105 (Jack No. 05) are operated as followings. 
Change 
CO Button on which “COl” is printed F CO Button which can access to Trunk group 1 
CO Button on which “CO2” is printed - CO Button which can access to Trunk group 2 
CO Button on which “CO3” is printed w CO Button which can access to Trunk group 3 
l See page “To assign into trunk group access...

OPERATION OF EMSS PROPRlE.TARY TELEPYONES 
(KX-T123235, KX-T123230, KX-T123220, KX-T123250, KX-T61631, KX-T61630, 
KY-TM cm KY_TM c;r;n KY_TRnARn KY-TRnR35 KY-TRnnm KY-TRnElm 
.\I\- I ” I “fi”. ,\I\_,” ,“““, ,.I. . ““w-w, . . . . . ..“W_“, ..I. . ““V-r, ..I. . “““““, 
To operate this system, after making program changes, set the System Program Switch located on the KX-T12321i 
( Electronic Modular Switching System ) to the SET position. . 
Making Calls 
When the unit is unused, Liquid Crystal Display...

n Automatic Line Access n Individual Line Access 
I I I I Lift handset Dial “9 ” 
or press 
SP-PHONE Wait for C.O. 
dial tone 
Dial 
phone 
number Talk I I 
Hang up or 
press 
SP-PHONE 
Description 
Each extension can automatically select an 
idle line within the CO line enable to call. 
Operation 
1. Lift the handset or press the SP-PHONE 
button. 
2. Dial (9). 
Dial tone from CO (Central Office) will be 
heard. 
l The CO indicator will be lit green at your 
extension and lit red at other extensions....

1 Individual Trunk Group Access 
Lift handset 
or press 
SP-PHONE Dial “8 ” Dial trunk 
group number 
(1 through 8) 
Wait for 
C.O. Dial Talk Hang up 
phone handset or 
dial tone number 
Press 
SP-PHONE 
BYOU may press the CO button instead of dialing 
8 and trunk group number (1 through 8). In this 
case, you must assign the trunk group access 
number to the CO button. 
To assign, see “Flexible CO button” on page 
4-57. There are 100 memory locations of system 
speed dialing available. A maximum of each...

l Be sure the handset is in the cradle and the SP-PHONE or MONITOR button is OFF. 
l Set the MEMORY switch of the Proprietary telephone to “PROGRAM”. 
n Storage 
Press Dial “9” Dial 
Press 
PROGRAMMABLE phone MEMORY 
FEATURE number 
l You may dial 81 through 88 instead of 9 . 
9 - - - An extension automatically selects an idle line 
within the CO line enable to call. 
81 through 88 - - - An extension selects a trunk 
group designated. 
19 or 81 through 88 must be dialed for storage. i 
W To Correct an...

Programming 
Be sure the handset is in the cradle and the 
SP-PHONE or MONITOR button is OFF. 
1. Set the MEMORY switch to “PROGRAM”. 
“PITS-PGM NO ? +” will be displayed. 
2. Press a programmable feature button. 
The LCD will show “MOl/ P : Not Stored” 
when nothing is stored in the 
programmable feature button “1”. 
When automatic line access number 9 and 
the phone number 123-456-7890 has 
been stored, “MOl/P : g-123-456-” will 
be displayed. 
3. Enter the line access number. 
9 : automatic line...

When a Line is Busy 
I Setting When hearing a recall for camp-on 
1 For outside (trunk) calls 
When outside-calls 
Press 
co If you will 
hear a 
busy tone Dial “6” CoLnrrrmarron 
tone of 2 beeps t-rang up or 
Lift handset 
You will 
press 
will be heard 
SP-PHONE or press hear CO 
SP-PHONE dial tone 
For intercom calls 
When intercom calls 
Dial 
extension If you will 
hear a 
number 
(100 through 199) busy tone Dial “6” Confirmation 
tone of 2 beeps Hang up or 
will be heard press 
SP-PHONE 
I...