Panasonic Kx-T123211d Installation Manual

. . . . . . . . . . . . . . . . . . . 
-until the desired CO number (01 through 12) appears 
........................ 
up to 8 outside access codes each with a 
....~~~~~~~~ default (all 12 CO’s) 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
AB= r;;l : to assign the same on all 12 CO’s 
ml :onCOOl 
&I 1 2 :onCO12 
Description 
If KX-T123211 is installed behind a host PBX, the 
host PBX may require a pause time to access 
Central Office Lines. This feature enables the host 
PBX to...

:..............,........until the desired CO number (01 through 12) appears 
I”“““““““““““““““” C= dial the trunk group number (1 through 8) 
I 
~INEXT*h~(IENDI 
;m$akl 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
q : trunk group number 1 
q : trunk group number 8 _- _ 
efault 
CO 01 is assigned to Trunk group 1. 
CO’07 is assigned to Trunk group 7 
CO 08,09, 10,ll and 12 are assigned to Trunk group 8. 
AB= 
El : to assign the same on all 12 CO’s 
mlil :onCOOl 
mm...

_....................................- 
until the desired CO number (01 through 12) appears 
(................................................... until the desired jack number appears 
m : on jack number 01 
_- 
m : on jack number 32 
_ :_ 
. fi[ : to assign the same on all 32 jacks 
until the desired mode appears 
(all 32 jack numbers) 
i ~~~~~~~~” ‘zbn jack number 01 
EF =m : to assign the same on all 32 jack numbers 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

i.......-..............................until the desired CO number (01 through 12) appears 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
until the &sired jack number appears 
-I : on jack number 01 
_ 
& :onjacknumber32 
___ I 
m : to assign the same on all 32 jacks 
until the desired mode appears 
.=......default (all 32 jack numbers) 
CD=[;;l : to assign the same on all 12 CO’s 
Description 
Through programming, you can select which...

Example: 
l Company XYZ would like incoming calls from the Central Office during the day mode to be received at 
the following zone. 
Jack no. of Extension Programming CO no. 
KX-Tl23211 
Jackno.05,06“-,,’ 
Programming . 
1. 
All CO numbers have been set to 14 m E kl m m ‘k . . . . . . * . . ’ . . . . . .; ; “~isable”on all jack numbers. 
l *a 
2. ( 
H or m m CFCT] m . . . . .‘. . .n. .(. ) _ CO number 01 has been set to 
. 
. * “Enable” on jack number 01. 
3. 
( m or m ) jFFi%FllhnEMORYl..................

. 
:.................,......,..............-until the desired CO number (01 through 12) appears 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
until the desired jack number appears 
m : on jack number 01 
: on jack number 32 , 
n : to assign the same on all 32 jacks 
until the desired mode appears 
default (all 32 jack numbers) 
EF =B : to assign the same on all 32 jack numbers 
m----:-a:-- uescnpuon 
The ringing start time during the day...

n Selecting the “Normal” or “DISA” mode 
:~.~..............‘......‘.~..~.~.~....~- until the desired CO number (01 through 12) appears. 
. . . . . . . . . . . . . ............ . . . . ...... . . . until the Normal or DlSA mode appearS 
Normal . . . . . default (all 12 CO’s) 
I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I CD= q : to assign the same on all 12 CO’s 1 
n Selecting the “DIL” mode mliJ :onCOOl 
I 
,........................................ unti! the rienird Cfl nlm-nhnr...

Programming 
H 
Selecting the “Normal” mode or the “DISA” mode H Selecting the “DIL” mode 
1. 
2. 
3. 
4. 
5. 
6. 
l Dial (51) for day mode. 
“CO Day/Mode” wiJ( be displayed. 
0 Dial (52) for night mode. 
“CO Night/Mode” will be displayed. 
Press the NEXT button. 
“CO NO ? +” will be displayed. 
Press the NEXT button or dial the CO 
number (01 through 12). 
“CO 01 : Normal” will be displayed and 
“Normal” will blink. 
Press the SELECT button until 
the “Normal” or “DISA” mode is displayed. 
Press the...

Example: 
l Company XYZ would like incoming calls from Central Office During the day mode 
to be received by operators 1 and 2. 
Operator 1 has been connected to jack number 01. 
Operator 
2 has been connected to jack number 02. 
KX-Tl23211 
Line 
1. mm( lNFXTl or m )lsELECTlmm.... Extension jack number 01 only has been set 
to receive all incoming calls through CO 01. 
2. ( ~ or j?GIiGj a ) lsELECTl m lnnEMoRv.*. . . . . Extension jack number 01 only has been set 
to receive all incoming calls through...

:.......................until the desired CO number (01 through 12) appears. 
_....................................... until the desired time appears 
1.5sec _e_;< _ 
2.5 set 
3.5 set . . . . . . . . . . . . . . . . . . . . 
: default (all 12 &O’s) 
4.5 set 
: to assign the same on all 12 CO’s 
Description 
The KX-T123211 may require a pause time to 
access Central Office Line or computer accessed 
line. 
The pause time may be changed to 1.5sec, 
2.5sec, 3.5sec or4.5sec. 
Programming 
1. Dial (53)....