Panasonic Cpc+AII/B Digital Business System Release Notes Manual

5. FF Key Programming (FF5)
Use the FF5 addresses in this chapter to assign special features to the Flexible
Function (FF) keys on DBS phones.
FF keys can be programmed to activate features which normally require
several keystrokes --such as initiating system features, assigning specific
extension numbers, or storing digits that are frequently dialed. Section 
700-
Feature Operation explains in detail how each of these features works.
FF keys are the buttons with 
LEDs.(The buttons without LEDs --...

Page 5-2
DBS Manual - Issued 8/l/95DBS-70-400 

FF Key Assignments for Extensions
Software Version: All VersionsAddress: FF5 
(ExtPort)# (Key)# (Feature)#
DescriptionEach Flexible Function (FF) key on DBS phones and EM/24 consoles can be
programmed with a feature code.During normal phone operation (not in
programming mode), pressing the FF key performs the feature 
associated
with the code.
Figures 5 1 and 5-2 (next page) illustrate FF key numbering on a 32-button
phone and on an EM/24 console. A key telephone’s FF keys are numbered
left-to-right,...

Figure 5-I. FF key layout on a 34-button phone
MUTE
I
CONFAUTO
Figure 5-2. FF key layout on an EM124 unit
ll-----Il
18 1116 1124 1333
14 1112 1120 ]333
12 1 I10 1 118 ]333
VOlVVOLA. --
PSDKeys
FFKeys
Page 5-4DBS Manual 
- issued 8/l/95DBS-70-400 

Table 5-l.Feature codes for FF key assignment
Code to be assigned to FF key
Feature
Absence Message
Account Code
Alarm
(CPC-B Version 2.0 to 4.0 with AFP)
Answer Key
Any Key
Attendant Park Hold
BGM (Background Music) On/Off
Busy Override
Call Forward--Outside
(CPC-AII/B versions prior to 7.0)
Call Forward
Call Forward--All Calls
Call Forward--Busy/No Answer
Call Forward--Busy
Call Forward--No Answer
Call Park
call Pickup
Call Waiting
Caller ID Log
Day Mode
Day/Night/Night2 Mode Toggle
(CPC-AWB Version...

Code to be assigned to FF key
(FFll enters an asterisk *)
FeatureWF12 enters a pound sign #)
Extension Directory900002
Extension Lockout74
Group Call Pickup70
HeadsetFF12 51
Intercom Key
FF12 8
Internal Dial ToneFF12 50
MC0 or ML Keys(81-86 or 89)
Note: See “ML/MC0 Separation” (FF3 ExtPort#
4#) to determine which type of key is available with
your software.
Meet-Me Answer77
Message Waiting AnswerAUTO REDIAL
MuteFFll FF12
Night ModeFF12 52(CPC-AH/B versions prior to 7.0)FF 
12 522(WC-AH/B Version 7.0 or...

Section 400-Programming
Chapter 5. FF Key Programming (FF5)
Feature
Talkback
Tone/Voice Calling
Transfer
Trunk Group Selection
(same as 
“MC0 or ML Keys”)
Trunk Queuing
Trunk Selection
UNA Pickup
Voice Mail One-Touch Access
(CPC-B Version 5.0 or higher)
Voice Mail Transfer
Code to be assigned to FF key
(FFll enters an &risk *)
(FF12 enters a pound sign #)
FFll 3
PROG PROG 1
PROG PROG PROG
(81-86 or 89)
PROG PROG 2
(01-64)
78
PROG AUTO NNN (XXXor AUTO SSD/PSD)#
ff
VM Pilot Numbe;Password (optional)Press...

Chapter 5. FF Key Programming (FF5)Section 400-ProgrammingFF Key Assignments for DSS Consoles
Software Version: All Versions
Address: FF5 (DSSPort)# (Key)# (Feature)#
DescriptionUse this address to assign features to FF keys on a DSS console. During
normal phone operation, pressing the FF key will perform the assigned
feature.
Figure 5-3 (next page) shows the key layout of a DSS/72 console. For a list
of feature codes, use the same table as the “Extensions” address (previous
page).
Programming
To assign...

~BGUUII 4uu-rroyrarwwlybr~aprer 3. rr ney rrogrammtng (i-r3j
NotesDefault Key Assignments.The F’F keys on DSS consoles 1 and 3 are
assigned by default as 
DSVBLF, Page, Park, and Night keys. DSS consoles 2
and 4 do not have default key assignments.
Restriction on Trunk LED Indications.Only the first 24 FF keys will light
for trunks that are assigned to them. Trunks can be assigned to the remaining
keys from the phone (rather than through programming mode), but the 
LEDs
will not light.
FFll and FF12 in...

Chapter 5. FF Key Programming (FF5)Section 400-Programming
Attendant Feature Package Key Assignments
Software Version:CPC-8 Versions 2.0 to 4.0
Address: FF5 (Attendant)# (Key)# (Feature)#
DescriptionIn DBS systems with the Attendant Feature Package (AFP), each FF key on
an Attendant console can be programmed with a feature code. During normal
phone operation (not in programming mode), pressing the FF key performs
the feature associated with the code.
For a list of feature codes, use the same table as the...