Panasonic Cpc+AII/B Digital Business System Release Notes Manual

DescriptionThe large-display telephone can be set to display 5 or 10 extension names on
the Extension Directory menu.
Section 400~Programming
Chapter 3. Extension Programming (FF3)
Extension Directory Display
Software Version: CPC-All (all versions); CPC-B Version 2.0 or higherAddress: FF3 (ExtPort)# 
34# (0 or l)#
Programming
I1FF3 
(l-144)# 34## (0 or l)#
tt
Notes
Extension Port0=5 names display.
l=lO names display.
Showing Extension Status in IO-Name Directory Display.When this
address is set to “1”...

Chapter 3. Extension Programming (FF3)Section 400-ProgrammingExtension Class of Service Assignment
Software Version:CPC-All (all versions); CPC-B Version 3.1 or higherAddress: FF3 (ExtPort)# 
35# (0-8)#
DescriptionUse this feature to assign a Class of Service to an extension.
Each Class of Service contains a unique combination of extension features,
which can be selectively enabled for the Class of Service (see 
FFl 2# 5#).
When you assign a Class of Service to an extension, you are assigning the
enabled...

Inbound DID Dial Numbers
Software Version:CPC-6 Version 2.0 onlyAddress: FF3 
(ExtPort)# 35# (OOOO-9999)#
DescriptionDID (Direct Inward Dialing) numbers must be assigned to extension ports so
they will ring on the appropriate extensions.
In CPC-B versions prior to 3.1, DID numbers can be set to ring on only one
extension port. Beginning with CPC-B Version 3.1, DID numbers can be set
to ring on multiple extensions (see address 
FFl 8# 3# for more information).
ProgrammingFF3 
(l-1 44)# 35# (0000-9999)#...

I---. -- -.-a---a \’ . -,- -----.. .__ . .-=- - .........J
Ringback Tone From ML Keys
Software Version:CPC-All (all versions); CPC-B Version 2.0 or higherAddress: FF3 (ExtPort)# 
36# (002)#
DescriptionThis address determines which tone an extension user will hear when dialing
another extension that has a busy ML key.
The tone selected in this address will be heard only if the called party has
more than one ML key and one of the ML keys is busy.
Programming
rFF3 
(1-l 44)# 36# (O-2)#
f4
Extension...

Station Port Class
Software Version:
CPC-B Version 4.0 or higherAddress: FF3 (ExtPort)# 
37# (l-2 or 7-8)#
DescriptionThis parameter is provided in case a specific phone or group of phones needs
a unique pad level.
By default, DBS extensions are assigned a circuit type based on whether they
are key phones or 
SLTs. The circuit type is used in the Digital Pad Settings
*address (FFl 8# 4# 3#) to determine the loss/gain settings for connections to
the 
Tl interface.
For example, an SLT is assigned by...

b1 ~apwr J. txIenswl I rrogrammlng trr3).3wauri 4uu-rrogr ai I II I III lg
Related Programming
Digital Pad Settings:FFl 8# 4## 3# (l-12)# (l-12)+7 (0-30)#Trunk Port Class: FF2 
(Trunk)# 26# (4-8)#
NotesTrunk Circuit Types.Circuit types can also be assigned to trunk ports. See
the Trunk Port Class address (FF2 ExtPort# 26#) for more information.Page 3-44DBS Manual 
- Issued 8/l/95DBS-70-400 

Section 400~rrogrammlngbnaptef 9. txension rrogrammtng (t-F31
SLT Hookflash
Software Version:CPC-8 Version 3.1 or higherAddress: FF3 
(ExtPort)# 38## (0 or l)#
DescriptionThis setting determines what happens when a single-line telephone (SLT)
user hookf’lashes when the SLT has one active call and one held call.
Programming
IIFF3 
(I-144)# 38# (0 or I)#
ft
Extension PortO=Brokers Hold (hookflash toggles
between the two parties).
l=Hookflash creates a three-party
conference.I
D BS-70-400DBS Manual - Issued...

Extension Ring PatternSoftware Version:Cl%AII Version 7.0 or higher; CPC-B Version 3.1 or higherAddress: FF3 
(ExtPort)# 39# (Pattern)#
DescriptionUse this address to assign a distinctive ringing pattern for incoming trunk
calls on digital phones 
(DSLTs or key phones). There are 9 different patterns
to choose from (see table below).
Begjnning with CPC-AIVB Version 7.0, this address also sets the ring pattern
for phones connected to an SLT-A (4-port Adapter).
Programming
IFF3 
(11144)# 39# (009)#
tf...

NotesHardware Requirement For Distinctive Ringing.The SCC-B card is
required in CPC-B configurations to support distinctive ringing on digital
phones (in which the ring pattern is programmed into the phone itself).
CPC-A and 
CPC-AI1 do not support distinctive ringing on digital phones.
However, with an AEC card, OPX Adapter, or SLT Adapter (these devices
determine the ring pattern), distinctive ringing can be supported for analog
SLT phones in any CPC 
co&Figuration.
DBS-70-400DBS Manual - Issued...

Digital SLT Receiving Volume
Software Version:CPC-AlI (all versions); CPC-6 Version 3.1 or higherAddress: FF3 (ExtPott)# 
40# (0 or l)#
DescriptionThe receiver (hearing) volume of the handset on a digital single-line
telephone 
(DSLT) can be set to “normal” or “loud.”
The “loud” setting gives a 
+6 dB gain over the “normal” setting
(approximately twice as 
loud).
ProgrammingFF3 
(1,144)# 40# (0 or l)#
f$
Extension PortO=Normal
1 =Loud
Page 3-48
DBS Manual - Issued 8/l/95DBS-70-400