Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Section 4OO+rogrammingLhapter 3. txtenston rrogrammlng (FF3)
Forced Account Codes
Software Version: All Versions
Address: FF3 (ExtPort)# 5# (012)#
DescriptionUse this address to force extension users to enter an account code before
making an outside call.
lBeginning with CPC-AII/B Version 3.1, forced account codes will be
verified by the DBS system before allowing the call.l
Beginning with CPC-AB/B Version 6.0, forced account codes can be either
“verified” or “unverified” by the system.
ProgrammingFF3...

Extension Lockout CodeSoftware Version: All VersionsAddress: FF3 (ExtPort)# 
6# (0000-9999)#
DescriptionUse this address to assign a 4-digit Station Lockout code to an extension.
This allows an extension user to “lock” the phone, preventing others from
being able to place or receive outside calls on the phone while the extension
user is away.However, the locked extension can be used for intercom calls.
NOTE: Assigning Station Lockout codes must be performed on an Attendant
or key phone.
Programming
To...

3ectIon 4w~rogrammlngulaprer Y. c~kulsion rrogrammmg (t-w)
Offhook Signal (CO)
Software Version: All Versions
Address:FF3 (ExtPort)# 7# (0 or l)#
DescriptionThis program determines if the DBS sends a tone signal to busy extensions
when an additional trunk call arrives.
Programming.
To activate the Offhook Signal . . .FF3 
(l-144)# 7# (0 or l)#t
t
Extension PortO=Disable Off’hook Signaling.
l-Enable Offhook Signaling.
Note: Default for the Primary
Attendant is 
1 (“Enable”).
To reset the Offhook Signal to...

ac?wiuI 8 wu-r I uyl a I II I III iy
Call Waiting/OHVA
Software Version: All VersionsAddress: FF3 
(ExtPort)# 8# (0 or l)#
DescriptionThis setting determines if an extension can receive Call Waiting and Offhook
Voice Announcement (OHVA).
ProgrammingFF3 
(I-144)# 8# (0 or l)#
I
Extension Port
O=Disable Call Waiting/OHVA.
kEnable Call Waiting/OHVA.
NotesConditions Under Which the Tone Is Not Sent.The Call Waiting
notification tone cannot be sent to an extension that has an absence message,
a call on hold,...

Section 400-ProgrammingChapter 3. Extension Programming (FF3)
Busy Override Send
Software Version: All VersionsAddress: FF3 (ExtPort)# 
9# (0 or l)#
DescriptionUse this address to enable an extension to “barge into” calls that are in
progress on other extensions. If the extension is enabled, the extension caller
can join in on another extension’s call -- all three parties will be able to hear
each other.
ProgrammingFF3 
(1.144)# 9# (0 or l)#
i(f
Extension PortO=Disable “Barge In” capability.
l=Enable...

Busy Override Receive
Software Version: All Versions
Address: FF3 (ExtPort)# lO# (0 or l)#
DescriptionThis address determines whether other extensions can “barge into” an
extension while it is engaged in a call. By default, barge-ins from other
extensions are allowed.Programming 
*
I
FF3 (l-144)# lO# (0 or l)#
+
Extension PortO=Disable (other extensions cannot
barge-in).
l=Enable (other extensions can
barge-in).
Related Programming
Alert Tone for Busy Override & OHVA:FFl 2# l# 17# (0 or l)#Busy Override...

Prime Line Pickup
Software Version: All VersionsAddress: FF3 (ExtPort)# 
11# (0 or l)#
DescriptionUse this address to enable or disable the Prime Line Pickup feature, which
allows the user to automatically pick up a trunk assigned to the 
FFl key by
simply picking up the receiver.
If the 
FFl key is a pooled trunk key, an available trunk is accessed in
numerical order, from the highest trunk number assigned to the key to the
lowest.
Programming
I1FF3 
(l-144)# ll# (0 or l)#
tf
Extension PortO=Disable...

Auto Pickup (Ringing Line)
Software Version: All VersionsAddress: FF3 (ExtPort)# 
12# (0 or l)#
DescriptionUse this program to enable Auto Pickup-- connecting with an incoming trunk
call, a hold recall, or a transferred call simply by picking up the ringing
extension’s handset.
If Auto Pickup is disabled, you must pick up the handset and press the
appropriate FF key to connect to the call.
ProgrammingFF3 
(l-144)# 12# (0 or l)#
ft
Extension PortO=Disable Auto Pickup.
l=Enable Auto Pickup.
NotesVAU...

Section 400-ProgrammingChapter 3. Extension Programming (FF3)
Unsupervised Conference
Software Version: All VersionsAddress: 
F-3 (ExtPort)# 13# (0 or I)#Description
Use this address to enable or disable the Unsupervised Conference feature on
an extension. If enabled, the extension user can initiate a three-party
conference between two trunks and the extension, then drop out of the call by
pressing either of the trunk keys used to call the other parties.Programming
IFF3 
(I-144)# 13# (0 or I)#
Extension...

will not be recorded.Chapter 3. Extension Programming (FF3)Section 
400-Programming
Station Message Detail Recorder (SMDR) Report
Software Version: All VersionsAddress: 
FF3 (ExtPort)# 14# (0 or I)#
DescriptionAny extension can be removed hm the SMDR report, so that its call activity
ProgrammingFF3 
(I-144)## 14# (0 or I)#
ft
Extension Port
O=The extension is not included in the
SMDR report.
l=The extension is included in the
SMDR report.
Related ProgrammingSMDR Display Start Tier for CO Calls: 
FFl 2#...