Panasonic Cpc+AII/B Digital Business System Release Notes Manual

4. Ringing and Hunt Groups (FF4)Use the FF4 program addresses in this chapter to set up trunk-to-extension
ringing, hunt groups and call coverage groups.
lThe DBS supports up to 8 hunt groups and 16 call coverage groups (all
versions).
lEach hunt group can have up to 8 extensions (all CPC-A versions; CPC-
All/B prior to 6.0) or 16 extensions (CPC-AII/B 6.0 or higher).
lEach call coverage group can have up to 8 extensions (all versions).
This chapter covers the following addresses:
FF4 AddressFF4 
l#...

Page 4-2DBS Manual - Issued 8/l/95DBS-70-400 

Section 400-ProgrammingChapter 4. Ringing and Hunt Groups (FF4)
CO Day Ring Assignments
Software Version: All VersionsAddress: FF4 
I# (ExtPort)# (Trunk)# (0 or I)#
DescriptionThis program determines which extension(s) will receive incoming calls on a
particular trunk when the DBS system is in “Day” mode.
Programming
IFF4 
I# (I-73 or l-14!5)# (1-64)# (0 or I)#
ff t
Extension PortTrunk NumberO=Thnk does not ring.
l=Trunk rings.
NOTE:Use port 73 (in single-cabinet systems) or port 145 (in double-
cabinet...

Chapter 4. Ringing and Hunt Groups (FF4)Section 400-Programming
_’ .
CO Day Ring Assignments for Hunt Groups
Software Version:CPC-All (all versions); CPC-B Version 2.0 or higherAddress: FF4 
I# (HuntGrp)# (Trunk)# (0 or I)#
DescriptionThis program determines which hunt group will receive incoming calls on a
particular trunk when the DBS system is in “Day” mode.
Programming
IFF4 
I# (79-86 or 151~158)# (1-64)# (0 or I)#
ff t
Hunt Groups 1 thru 8:Trunk No.O=Trunk does not ring.
l=Trunk rings.CPC-AI1 or...

Section 400-ProgrammingChapter 4. Ringing and Hunt Groups (FF4)
CO Night Ring Assignments
Software Version: All VersionsAddress: FF4 
2# (ExtPort)# (Trunk)# (0 or l)#
DescriptionThis program determines which extension(s) will receive incoming calls on a
particular trunk when the DBS system is in “Night” mode.
ProgrammingFF4 
2# (l-73 or l-145)# (l-64)# (0 or l)#
7f+
Extension Port
Trunk NumberO=Trunk does not ring.
l=Trunk rings.
Note: Use port 73 (for single-cabinet systems) or 145 (for double-
cabinet...

Chapter 4. Ringing and Hunt tiroups (FF4)Section 400-Programming
CO Night Ring Assignments for Hunt Groups
SoftwareVersion:CPC-AII (all versions); CPC-8 Version 2.0 or higherAddress: FF4 
2# (HuntGrp)# (Trunk)# (0 or l)#
DescriptionThis program determines which hunt group will receive incoming calls on a
particular trunk when the DBS system is in “Night” mode.
Program.mingIFF4 
2# (79-86 or 151~158)# (l-64)# (0 or I)#
ff f
Hunt Groups 1 thru 8:Trunk No.&Trunk does not ring.
CIPC-ATTorCPC3-Bl=Trunk...

Section 400-ProgrammingChapter 4. Ringing and Hunt Groups (FF4)
Hunt Group Pilot Numbers
Software Version:CPC-All (all versions); CPC-B Version 2.0 or higherAddress: FF4 
3# (HuntGrp)# 1# (11-69 or lOl-699)#
DescriptionUse this program to assign a “pilot” extension number to a hunt group. This
“pilot” number can be dialed from any intercom phone to reach the hunt
group. An example is dialing “500” to reach a Voice Mail hunt group.
Each hunt group 
must have a pilot number assigned to it in order for the...

Chapter 4. Ringing and Hunt Groups (FF4)Section 400-Programming
Hunt Group Type:FF4 3# (HuntGrp)# 2# (0-2)#Transfer Extension: FF4 
3# (HuntGrp)# 3#. (ExtNo.)#
Hunt Group Members: FF4 3# (HuntGrp)# (Position)# (ExtNo.)##
CO Delayed Day Ring Assignments For Hunt Groups:FF4 5# (HuntGrp)#
(Trunk)# (0 or l)#
CO Delayed Night Ring Assignments For Hunt Groups:FF4 6#
(HuntGrp)# (Trunk)# (0 or l)#
CO Night 2 Ring Assignments For Hunt Groups:FF4 9# l# (HuntGrp)#
(Trunk)# (0 or l>#
CO Delayed Night 2 Ring...

Section 400-ProgrammingChapter 4. Ringing and Hunt Groups (FF4)
Terminal/Circular Hunt Groups
Software Version:CPC-A; CPC-B Versions prior to 2.0Address: FF4 
3## (HuntGrp)# 1# (0 or l)#
DescriptionA maximum of 8 extensions can be put in each of 8 hunt groups. Each hunt
group can be designated as a “terminal type” or “circular type”.
Terminal Hunt Group Operation
The call must be transferred or a trunk set to ring at the first extension in the
group in order for the Terminal Hunt feature to work.
If the...

Chapter 4. Ringing and Hunt Groups (FF4)Section 400-Programming
Programming
IFF4 
3# (198)# I# (0 or l)#
++
Hunt Group No.O=Terminal Hunting
l=Circular Hunting
Related Programming
Offhook Signal: FF3 (ExtPort)## 7# (0 or l)#
NotesSetting Hunt Group Types in Later CPC Versions.Set hunt group types for
CPC-AIT versions, and for CPC-B Version 2.0 or higher, in FF4 3#
(HuntGrp)# 2# (0-2)#.
Hunt Group Membership Restriction. An extension can be a member of
only one hunt group. Hunt group extensions cannot...