Home > Panasonic > Communications System > Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Here you can view all the pages of manual Panasonic Cpc+AII/B Digital Business System Release Notes Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 651

Section 400-ProgrammingChapter 8. Least Cost Routing (FF8)
Table 8-1.Time Priority Route Table format
Fixed Time PeriodsLCR TrunkGroup Position
Step 3: Set Up LCR for Long-Distance DialingFF8 1# 
(TableNo.)# (AreaCode)# (Add/Remove)#
Input all area codes into a Time Priority Route Table. Maximum 1,000 area
codes (000-999) per Table. All area codes you want routed by LCR must be
input into a Time priority Route Table. If you need to set up special area/
office code combinations as “exceptions to the...

Page 652

Chapter 8. Least Cost Routing (FF8)Section 400-Programming
Step 6: Set Up Add/Delete DigitsFF8 
7# (TrunkGroup)# (DeleteDigits)#
FF8 8# (TrunkGroup)# (AddDigits)#
The DBS will automatically outpulse Add Digits, or prevent Delete Digits
from being outpulsed, at the beginning of all phone numbers dialed on trunks
in the assigned group. The Add/Delete Digits are associated with LCR trunk
groups, not with the dialed phone number or the time of day.
Example:When the DBS is behind a PBX, assign “g-PAUSE”...

Page 653

Section 400-ProgrammingChapter 8. Least Cost Routing (FF8)
when a trunk becomes available. When the DBS recalls, the user picks
up the handset and the DBS will automatically redial the number.
4. When a trunk is found, digits are added to or deleted from the phone
number, according to the Add or Delete digits assigned to the trunk group.
.
Using LCR With a PBX System
When the DBS is behind a PBX. two “9”s have to be dialed to access an
outside line --once to access the PBX, and again to access a trunk...

Page 654

Chapter 8. Least Cost Routing (FF8)Section 400-Programming
LCR Area Codes
Software Version: All VersionsAddress: FF8 
1# (TableNo.)# (AreaCode)# (0 or l)#
DescriptionUse this address to route all calls to a certain area code through LCR.
This address associates the area code with a Time Priority Route Table, which
tells the DBS which trunk group to route the call to, based on the time of day
and weekend when the area code is dialed.
To use different Time Priority Route Tables for the same area code...

Page 655

Section 400-ProgrammingChapter 8. Least Cost Routing (FF8)LCR Office Codes
Software Version: All VersionsAddress: FF8 
2# (TableNo.)# (OfficeCode)# (0 or l)#
DescriptionUse this address to route all calls to a certain office code (exchange) through
LCR.
This address associates an exchange with a Time Priority Route Table, which
tells the DBS which trunk group to route the call to, based on the time of day
and weekend when the exchange is dialed.
To use different Time Priority Route Tables for different...

Page 656

Chapter 8. Least Cost Routing (FF8)Section 400-Programming
Special LCR Area Codes
Software Version: All VersionsAddress: FF8 
3## (EntryNo.)# (AreaCode)#
DescriptionUse this address to assign up to four special area codes for LCR routing.
This address is used in conjunction with the next address -- “Special LCR
Office 
Codes” (FF8 4#) -- to assign different office codes within the same
area code to different Time Priority Route Tables.
If an area code is assigned here, the DBS will wait until the next...

Page 657

Section 400-Programming
Chapter 8. Least Cost Routing (FF8)
Special LCR Office Code Tables
Software Version: All VersionsAddress: FF8
4## (EntryNo.)# (TableNo.)# (OfficeCode)# (0 or l)#
DescriptionUse this address to assign office codes to a special area code for LCR routing.
This address is used in conjunction with the previous address -- 
“Special
LCR Area Codes” 
(FFS 4#) -- to assign different office codes within the
same area code to different Time Priority Route Tables (instead of using thesame...

Page 658

Chapter 8. Least Cost Routing (FF8)Section 400-Programming
Time Priority .Route Tables
Software Version: All Versions
Address: FF8 
5# (TableNo.)# (Position)# (TrunkGroup)#
DescriptionUse this address to assign LCR trunk groups to Time Priority Route Tables.
Within each Table, LCR trunk groups are assigned to priority positions in six
time-of-day periods (in the 
format shown in Table 8-2 below). This sets up
LCR routing paths for the DBS to follow when outgoing calls are placed.
Area codes and/or office...

Page 659

Section 400-Programming
Chapter 8. Least Cost Routing (FF8)
To reset a position in a Time Priority Route Table to default . . .FF8 
5# (1015)# (l-48)# CONF ON/OFF
f z
Time PribrityPosition
Route Table No.
Related ProgrammingLCR Access: 
FFl 2# l# 3# (0 or l)#LCR Area Codes: 
FF8 l# (TableNo.)# (AreaCode)# (0 or l)#LCR Office Codes: 
FF8 2# (TableNo.)# (OfficeCode)# (0 or l)#Special LCR Area Codes: 
FF8 3# (EntryNo.)## (AreaCode)#
Special LCR Office Code Tables: FF8 4# (EntryNo.)# (Tab1eNo.w (Office...

Page 660

Chapter 8. Least Cost Routing (FF8)Section 400-Programming
LCR Trunk Groups
Software Version: AlI VersionsAddress: FF8 
6# (TrunkGrp)# (Position)# (Trunk)#
DescriptionUse this address to build LCR trunk groups, which are assigned to priority
positions in Time Priority Route Tables (see FF8 
5#).
Each LCR trunk group can contain up to 8 trunks. A maximum of 8 different
trunk groups can be created. Within each trunk group, the trunks are assigned
to positions from the highest priority (position 1) to the...
Start reading Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Related Manuals for Panasonic Cpc+AII/B Digital Business System Release Notes Manual

All Panasonic manuals