Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Section 400-Programming
Chapter 7. Toll Restriction (FF7)
Special Office Code Table For TRS Types 3-6
Sdftware Version: All VersionsAddress: FF7 
5## (l-4)# (000-999)# (0 or l)#
- -
DescriptionEach of the four special area codes entered in the previous address (FF7 4##)can be tied with one or more special 
offke codes using this address. Each
special area code can be matched to office codes 
(000-999). And. each office
code can be individually allowed or denied. Typically. 
“976”, “555” or other
office...

Chapter 7. Toll Restriction (FF7)Section 400-Programming
Special ‘T-Digit Table For TRS Types 2-6
Software Version: All VersionsAddress: FF7 
6# (l-50)# (0000000-9999999)#
DescriptionUse this program to set up a table of up to 50 restricted 7-digit numbers for
trunks assigned TRS types 2-6. These 
7-digit numbers are restricted for all
area codes.
The “l-Digit Toll Restriction For TRS Types 2-6” address (FF7 l# 12-16#)
determines whether this table is checked or not.
Programming
To assign a special...

Section 400-ProgrammingChapter 7. toll Restriction (FF7)
Day TRS Types O-7 for Trunks
Software Version: All VersionsAddress: FF7 
7# (ExtPort)# (Trunk)# (017)#
DescriptionUse this program to assign TRS types to the trunks on an individual
extension. The assigned TRS type will apply to the trunk during “Day”
mode.
For a review of TRS types, see “An Overview of Toll Restrictions” on page
7-2.
Programming
IFF7 
7# (11144)# (l-33 or l-65)# (017)#
ff t
Extension PortTrunkTRS Type O-7Default: 7 (all calls...

Night TRS Types O-7 for Trunks
So-are Version: All VersionsAddress: FF7 
8# (ExtPort)# (Trunk)# (O-7)#
DescriptionUse this program to assign TRS types to the trunks on an individual
extension. These TRS types will apply when the system is in “Night” and
“Night 2” mode.
For a review of TRS types, 
see “An Overview of Toll Restrictions” on page7-2.
ProgrammingFF7 
8# (I-144)# (l-33 or l-65)# (017)#
ff t
Extension TortTrunkTRS Type O-7
Default: 7 (all calls
allowed)
Note: Enter “65” (for CPC-AII/B) or “33”...

Section 400-Programming
Chapter 7. Toll Restriction (FF7)
Area Code Table For TRS Types 3-6 (Global Copy)
Software Version: All VersionsAddress: 
FR 9# (l-4)# (0 or l)#Description
Use this address to allow or deny all area codes for TRS types 3-h.Programming
FF7 
9# (l-4)# (0 or I)#
4I
TRS Types:O=Allow dialins.
l=Type 3
1 =Deny dialing.
2=Type 4
3=Type 5Defaults --
4=Type 6TRS Types 3 and 4: 1 (Deny)
TRS Types 5 and 6: 0 (Allow)
Related ProgrammingArea Code Table for TRS Types 3-h: FF7 
2# (3-6)#...

Chapter 7. Toll Restriction (FF7)Section 400-Programming
Office Code Table For TRS Types 3-6 (Global Copy)
Software Version: All VersionsAddress: FF7 
9# (58)# (0 or l)#
DescriptionUse this address to allow or deny all office codes for TRS types 3-6.
Programming
11FF7 
9# (58)# (0 or l)#
f
TRS Types:
5=Type 3
6=Type4
7=Type5
8=Type6
O=Aliow dialing.
l=Deny dialing.
Defaults --
TRS Type 3: 1(Deny)
TRS Types 4,5and 6: 0(Allow)
Related Programming
Office Code Table for TRS Types 3-6: FF7 3# (3-6)#...

Section 400-ProgrammingChapter 7. Toll Restriction (FF7)
Area & Office Code Table for TRS Types 3-6 (Global
COPY)
Software Version: All VersionsAddress: 
FR 9# (9~12)# (0 or l)##
DescriptionUse this address to allow or deny all area codes Ir[Ltd office codes for TRS
types 3-6.
ProgrammingFF7 
9# (9~12)# (0 or I)#
TRS Types:
9=Type 3
lO=Type4
ll=Type5
12=Type6
O=Allow dialing.
l=Deny dialing.
Defaults --
TRS Type 3:1 (Deny)
TRS Type 4:1 (Deny) for A/C*
and 0 (Allow) for O/Cs
TRS Types 5and 6: 0 (Allqw)
1...

Chapter 7. Toll Restriction (FF7)Section 400-Programming
Special Office Code Table For TRS Types 3-6 (Global
COPY)
Software Version: -AlI VersionsAddress: FF7 
9# (13016)# (0 or l)#
DescriptionUse this address to allow or deny the Special Area/Office Code combinations
set in FF7 
4# and 5#.
Special Office Code Table (Global Copy) resets all office codes assigned to a
Special Area Code at the 
same time (instead of resetting the office codes
individually in FF7 
5#).
Special area/office code combinations...

8. Least Cost Routing (FF8)
Use the FF8 addresses in this chapter to set up Least Cost Routing (LCR).
This chapter covers the following addresses:
FF8 Address
An Overview of Least Cost Routing
TopicPage
Before Programming LCR8-2
I LCR Setup8-2
Activating LCR8-4
LCR Call Processing8-4
Using LCR With a PBX System8-5
1 FF8 I# (Tab1eNo.M (AreaCode)# (0 or l)#1 LCR Area Codes18-6 I
FF8 2# (TableNo.)# (OfficeCode)# (0 or l)#I LCR Office Codes18-7 1
FF8 3# (EntryNo.)# (AreaCodeF( Special LCR Area Codes18-8 1...

An Overview of Least Cost Routing
With the Least Cost Routing (LCR) feature, you can program the DBS system
to automatically route outgoing calls to the least expensive carrier.
Before Programming LCR
lVerify the carrier for each CO trunk in the system, and which carriers
provide the best rates at different times of the day or weekend -- check the
site’s phone bills for call history.
lCut Strap S 1 on the CPC card. See Section 300-Installation for
instructions.
lEnable LCR for the system in FFl 2# l# 3#...