Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Attendant Transfer Recall Timer for Intercom Cdls
Software Version:CPC-Ail (ail versions) and CPC-B Version 2.0 or higherAddress: 
FFI 3## 24# (0-12)#
DescriptionThis timer determines how long an Attendant-transferred intercom call will
ring at an extension before it recalls to the Attendant (20 seconds by default).
Programming
FFl 3# 24# (0912)#
f
Attendant Transfer Recall Timer setting for intercom calls
Default: 1 (20 seconds) (see table below)
Table l-30. Attendant Transfer Recall Timer values for...

Section 400-Programming
Chapter 1. System Programming (FFl)
Extension Transfer Recall Timer for Intercom Calls
Software Version:CPC-All (all versions) and CPC-B Version 2.0 or higherAddress: 
FFl 3# 25# (0-12)#
DescriptionThis timer determines how long a transferred intercom call will ring at
another extension before it recalls back to the transferring extension (140
seconds by default).
Programming
FFI 3# 25# (0912)#
f
Extension Transfer Recall Timer setting for intercom calls
Default: 7 (140 seconds)...

Chapter 1. System Programming (FFi)Section 400-Programming
CO Delayed Ring Timer
Software Version:CPCill (all versions) and CPC-B Version 3.1 or higherAddress: 
FFl 3f# 26# (O-15)#
DescriptionCO Delayed Ringing allows a second extension to ring when an incoming
trunk call is not answered at the first extension.This timer determines how
long a CO trunk call will ring at the first extension before it begins ringing at
the second extension.(When the second extension begins ringing, the first
extension will...

Section 400-ProgrammingChapter 1. System Programming (FFl)
Related ProgrammingDelayed Ring: 
FFl 2# 1# 21# (0 or l)#CO Delayed Day Ring Assignments : FF4 
5# (ExtPort)# (Trunk)#
CO Delayed Day Ring Assignments for Hunt Groups:FF4 5# (HuntGrp)#
U’~W+
CO Delayed Night 1 Ring Assignments: FF4 6# (ExtPort)# (Trunk)#
CO Delayed Night 1 Ring Assignments for Hunt Groups: FF4 6#
(HuntGrp)# (Trunk)#CO Delayed Night 2 Ring Assignments: 
FF4 9# 2# (ExtPort)# (Trunk)#/
CO Delayed Night 2 Ring Assignments for Hunt...

Chapter 1. System Programming (FFl)Section 400-Programming
Extension (DSS/BLF) Delayed Ring Timer
Software Version:CPC-All (all versions) and CPC-B Version 3.1 or higher
Address:
FFl 3# 27# (O-15)#
DescriptionExtension Delayed Ringing allows a second extension to ring when an
intercom call is not answered at the first extension. This timer determines
how long the intercom call will ring at the first extension before it begins
ringing at the second extension. (When the second extension begins ringing,
the...

Section 400~ProgrammingChapter 1. System Programming (FFl)
Related ProgrammingExtension 
(BLF) Delayed Ring: FFl .2# l# 30# (0 or l)#
Extension Delayed Ring Table: FF4 8# (ExtPort)# (ExtPort)## (0 or l)#
NotesExtension Delayed Ring Control in Older CPC-B Versions.In CPC-B
versions prior to 3.1, extension delayed ringing is controlled by the Call
Forward-No Answer Timer (FF13# 19# 0-15#).
DBS-70-400DBS Manual - Issued 8/l/95Page l-121 

Lnapter 1. system rrogrammrng (t-I-1 )section 4uu-Programming
Hunt Group No Answer Timer
Software Version:CPC-All (all versions) and CPC-B Version 3.1 or higherAddress: 
FFl 3# 28# (0-15)#
DescriptionIf a call has entered a hunt group and the first extension to ring is not
answered, this timer determines how long the extension will ring before the
next idle extension in the hunt group begins ringing (12 seconds by default).
Programming
I
FFl 3# 28# (0115)#
f
Hunt Group No Answer Timer setting
Default: 2...

Section 400-Programming
Chapter 1. System Programming (FFI)Automatic Day Mode Start Time
Software Version:CPC-All (all versions) and CPC-6 Version 4.0 or higherAddress: 
FFl 3## 29# HHMM#
DescriptionSetting the Automatic Day Mode Start Time allows the DBS to switch from
Night mode 
to Day mode automatically.
You can program trunks to ring incoming calls at different extensions during
Day or Night mode (see FF4 addresses). And different TRS types can be
programmed for use in each mode (see FF8...

Chapter 1. System Programming (FFl)Section 400-Programming
NotesSystem Clock.The Automatic Day Mode start time depends on the DBS
system clock being set correctly.
NIGHT Key Operation.If only one of the Auto Mode Start Ties is set, the
Attendant NIGHT key can be used to manually switch to another mode. For
instance, if Night mode has been activated automatically, the Attendant can
press the NIGHT key to go into Day mode. (However, the Attendant must
wait at least 3 minutes after the mode is automatically...

Section 400-ProgrammingChapter 1. System Programming (FFl )
Automatic Night 2 Mode Start Time
Scftware Version:CPC-All and CPC-B, Version 7.0 or higherAddress: 
FFl 3#! 30# HHMM#
DescriptionIn this address, you can activate a second Night mode by setting the
Automatic Night 2 Mode Start Time. This allows the DBS to switch from
Night to Night 2 mode automatically 
at the time set in this address.
You can program trunks to ring incoming calls at different extensions during
Day or Night mode (see FF4...