Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Chapter 1. System Programming (FFl)Section 400-Programming
Feature
Offhook Voice Announce
Offhook Voice Announce Answer
Page
Park Hold
PSD (Personal Speed Dial) Directory
PSD (Personal Speed Dial) Number
-
Release
Reminder
Save Number Redial Access
Save Number 
Redial Set
SSD (System Speed Dial) Directory
SSD (System Speed Dial) Number
Tl Alarms --
Frame Loss
Red Alarm
Signal Loss
Slips
Sync Loss
Yellow Alarm
Talkback
Tone/Voice Calling
Transfer
Trunk Group Selection
(same as 
“MC0 or ML Keys”)
Trunk...

Section 400~ProgrammingChapter 1. System Programming (FF:)
Related ProgrammingFlex.Func. Screen Text: 
FFl 2# 7# 2# (Screen)++ (Key)# (Text)#
Flex.Func. Screen Default: 
FF1 2# 7# 3# (Screen)++ (0 or l)#Flex.Func. Screens Default (All): 
FFl 2# 7# 4#I (0 or 1)k
Display Screens During Call States: FF3 (ExtPort)# (26-33Hf (Screen)#
NotesFFll and FF12 in the Feature Codes.The * and # phone keys are used as
movement keys (for scrolling through addresses) while in programming
mode. Therefore, when programming...

J~LLIUI I 4uwr I 0y1 al I II I III iy
Flexible Function Screen Text
Software Version:CPC-All and CPC-B, Version 6.0 or higher
Address: FFl 2# 7# 2# (Screen)# (SoftKey)# (Text)#
Description
Use this program to create the text that identifies the soft keys on a flexible
function screen for large-display phones. The text for each soft key can be up
to 8 characters long.
Use a 
DSW’2 console (with alphabetic keys) or the remote programming
mode on a large-display phone (scroll through the alphabetic...

Section 400~ProgrammingChapter 1. System Programming (FFl)
Flexible Function Screen Default
Software Version:CPC-All and CPC-B, Version 6.0 or higherAddress: 
FFl 2# 7# 3# (Screen)# (0 or l)#
DescriptionUse this program to reinstate individual flexible function screens to the
default value (blank: no features assigned to soft keys).
Pr.ogramming
FFI 2# 7# 3# (2539)# (0 or l)#
t
Screen Number:O=Do not rehrn to default setting.
25=Flex.Func. Screen 1I=Rerurn to default setting.
26=Flex.Func.Screen 2...

Chapter 1. System Programming (FFl)Section QOO-Programming
Flexible Function Screens Default (All)
Sofhrvare Version:CPC-AII and CPC-B, Version 6.0 or higherAddress: 
FFl 2# 7# 4# (0 or l)#
DescriptionUse this program to reinstate all 15 flexible function screens to the default
value (blank; 
RO features assigned to soft keys).
Programming
FFI 2# 7# 4# (0 or l)#
O=Do not return to default setting.
l=Return to default setting.
Related Programming
Flex.Func. Screen for Soft Keys: FFl 2# 7# l# (Screen)#...

Section 400-ProgrammingChapter 1. System Programming (FFl)
Caller ID Automatic DISA
Automatic DISA Callers
Software Version:CPC-All and CPC-8, Version 6.1 or higherAddress: 
FFl 2# 8# (l-lO)# (PhoneNo.)#
DehcriptionUse this program to assign up to 10 phone numbers for the Caller ID
Automatic DISA (Direct Inward System Access) feature. When a caller (e.g.,
company salesman) calls from one of the phone numbers 
assigned in this
address, the trunk receiving the call will automatically switch to DISA
without...

Chapter 1. System Programming (FFi)Section 400-Programming
Door PhonesA “Door Phone” (also called “Door Box”) is an intercom with a single button,
installed on building entrance doors, that allows visitors to announce their presence
by pressing the button.It is used with a Door Opener (not sold by Paruzsonic), whichis an electronic lock that can be unlocked from an extension phone inside.
The DBS supports two types of door phone connections -- one to trunk ports (using aVB-43701 Door Phone Adaptor) and...

Section 400~ProgrammingChapter 1. System Programming (FFl)
NotesReset Requirement.After setting FFl 2# 9# addresses, activate the door
phones by unplugging them from their extension ports, then plugging them
back in.
Restiictions for Door Phones:
lDoor phones cannot be Attendants (ports 1 or 2).
lDoor phones cannot be included in a conference call.
lDoor phones cannot be members of a hunt group or call coverage group.
lDoor phone calls are not subject to barge-ins (Busy Override), regardless
of the...

Door Phone Ring AssignmentsSoftware Version:CPC-All and CPC-6, Version 7.0 or higherAddress: 
FFl 2# 9# (DoorPhone)# 2# (ExtPort)# (0 or l)#
DescriptionUse this address to determine which extension(s) will ring when a door phone
caller initiates a call. This applies to door phones connected to digital
extension ports only 
(,not trunk ports).
It is possible to assign several or all extensions to ring for a door phone call.
ProgrammingI
FFl 2# 9# fl-4)# 2# (l-72 or l-144)# (0 or l)#
f4+
Door Phone...

Section 400~ProgrammingChapter 1. System Programming (FFl)
extension, even if the phone is programmed to transfer (the phone will
continue to buzz, until the user picks it up).
Restrictions for Door Phone Calls:
lDoor phones cannot be included in a conference call.
lDoor phones cannot be members of a hunt group or call coverage group.
lDoor phone calls are not subject to barge-in (Busy Override), regardless of
the extension’s program settings.
lDoor phone calls have the same priority as intercom...