Nortel Modular Ics 6.0 Installer Guide

System prgrming / 401
P0992638 03Modular ICS 6. 0 Installer Guide
Remind delay
Held Line Reminder delay allows you to choose the number of 
seconds before the Held Line Reminder feature begins at a 
telephone that has an external call on hold. 
Press CHANGE
 to select the setting: 30, 60, 90, 120, 150, or 
180 seconds.
Directd pickup
Directd pickup allows you to answer any calls by specifying 
the internal number of the ringing telephone. 
Press CHANGE
 to select the setting: Y (Yes) or N (No).
Page...

402 / System prgrming
Modular ICS 6.0 Installer GuideP0992638 03
Page Timeout
The paging feature is automatically disconnected after a set 
length of time. 
Press CHANGE
 to select the maximum number of seconds 
needed for a page: 15, 30, 60, 120, 180, 300, 600, 2700.
Daylight time
When this feature is turned on, your system will automatically 
switch between standard time and daylight savings time. 
Press CHANGE
, to select the setting: Y (Yes) or N (No).
AutoTime&Date
You can program the Automatic...

System prgrming / 403
P0992638 03Modular ICS 6. 0 Installer Guide
This feature also allows the automatic changing between 
North American daylight savings and standard time . 
The Automatic Time and Date feature automatically overrides 
any manually-programmed changes to the time and date.
Note:  The year is not included with the time and date 
information and must be programmed manually if the 
current year differs from the network time.
Press CHANGE to choose Y or N.
Setting SWCA controls
You can...

404 / System prgrming
Modular ICS 6.0 Installer GuideP0992638 03
The Invoke by Hold setting determines if a SWCA call put on 
Hold can be picked up from other extensions in the group. 
If you want the call to be available to be picked up by other 
members of the groups when you put a call on Hold, set 
Invoke by Hold: to Y. A flashing indicator appears beside 
the SWCA key when the call assigned to that key is put on 
Hold. 
If you want calls to remain on Hold only at the telephone 
where the call is...

System prgrming / 405
P0992638 03Modular ICS 6. 0 Installer Guide
Call log space
Call log space programming customizes how log space is 
allocated to telephones in the system.
Reset all logs allows you to reallocate the Call log space 
equally to all telephones in your system.
1. Press YES
 and use the dialpad to enter the space allocation 
for the Call log at each telephone. 
You must use a three-digit number (for example, 020 to 
give each set 20 spaces).
2. Press YES
 to accept the settings and end...

406 / System prgrming
Modular ICS 6.0 Installer GuideP0992638 03
Host delayInstaller password required
Host delay allows you to assign the delay between the moment 
an outgoing line is selected to make an external call, for 
example, by lifting the receiver off the telephone, and the 
moment that Norstar sends dialed digits or codes on the line.
Press CHANGE
 to select the setting: 200, 400, 600, 800, 1000, 
1200, 1400, 1600, 1800, or 2000 milliseconds. 
Link time
Installer password required
Link time...

System prgrming / 407
P0992638 03Modular ICS 6. 0 Installer Guide
1. Use CHANGE and the dialpad to enter the internal number of 
the Alarm telephone. 
2. Press ‘ to set the Alarm telephone to None. 
The default setting is 221.
Set relocation
Set relocation allows you to move any telephone to a new 
location within the Norstar system without losing the directory 
number, autodial settings, personal speed dial codes, and any 
programming for that telephone. 
Press CHANGE
 to select the setting: N (No) and...

408 / System prgrming
Modular ICS 6.0 Installer GuideP0992638 03
Press CHANGE to select the setting: Y (Yes) and N (No). 
Answer key
Up to eight answer keys can be assigned per set. The Answer 
key setting in Feature settings allows you to determine what 
types of calls will alert at the telephone. 
Answer key changes do not apply to portables.
Press CHANGE
 to select the settings: Basic, Enhanced, and 
Extended. 
On the Basic setting answer keys do not ring for:
Prime set call capture
call forwarded...

System prgrming / 409
P0992638 03Modular ICS 6. 0 Installer Guide
On Extended all call types will ring except priority calls and 
voice calls.
Phantom DNs
A Phantom DN is the term used to describe a situation where 
a line is programmed to appear and ring on a set that does not 
physically exist. It allows you to create an Answer Key for the 
set that does not exist on an existing set. You would use a 
phantom DN in the case where you have taken a line out of 
service, such as a customer-response line,...

410 / System prgrming
Modular ICS 6.0 Installer GuideP0992638 03
Direct-dial
Direct-dial allows you to dial a single system-wide digit that 
can be used to call a specific telephone, called a Direct-dial 
telephone. The most common example of a Direct-dial 
telephone would be telephone for an operator, a receptionist, 
or an attendant.
D-Dial1
For the direct-dial telephone, indicate whether it is an internal 
or external number. A total of five Direct-dial telephones can 
be programmed on the system.
Use...