Nortel Modular Ics 6.0 Installer Guide

Sys speed dial / 381
P0992638 03Modular ICS 6. 0 Installer Guide
Sys speed dial
System speed dial allows you to configure speed dial codes 
(001 - 255) that can be used by any telephone on the system to 
dial pre-programmed numbers.
If you specify a name with the speed dial entry, an incoming 
call on a CLID line with a dialed number that matches the 
speed dial entry will display the name as part of the CLID 
display on the receiving telephone or when ²¡ÚÚ is 
envoked to display call information. This...

382 / Passwords
Modular ICS 6.0 Installer GuideP0992638 03
Passwords
COS pswds
Class of Service (COS) passwords permit controlled access to 
system resources by both internal and remote users. 
When you enter a COS password at a telephone, the restriction 
filters associated with your password apply instead of the 
normal restriction filters. Similarly, when a remote user enters 
a COS password on an incoming auto-answer line, the 
restriction filters and remote package associated with their 
COS...

Passwords / 383
P0992638 03Modular ICS 6. 0 Installer Guide
Pswd
Pswd defines the six-digit Class of Service password. 
There is no default password.
Use ≠, CHANGE
 and the dialpad to program the 
six-digit password. 
Use BKSP
 to edit numbers you have entered.
User flt
User filter allows you to assign a restriction filter to a COS 
password. The user filter associated with the COS password 
replaces any normally applicable set restriction, line/set 
restriction, or remote restriction.
Use CHANGE
 and...

384 / Passwords
Modular ICS 6.0 Installer GuideP0992638 03
Remote pkg
Remote pkg allows you to assign a specific remote access 
package to a COS password. 
The remote access package associated with the COS password 
replaces any normally applicable remote access package.
Use CHANGE
 and the dialpad to program the two-digit remote 
package. 
The default setting (None), means that any 
normally_applicable remote access package still applies.
Call log pswds
This setting allows you to override any Call log...

Passwords / 385
P0992638 03Modular ICS 6. 0 Installer Guide
Progrming pswds
You can choose any combination of six digits for Passwords.
Some passwords allow line assignments to be rearranged, 
which could disrupt your telephone service. Provide 
passwords only to selected personnel to prevent unauthorized 
access to programming. 
Installer
The default Installer password is 266344 (
CONFIG).
1. Use CHANGE
, the dialpad, and OK to program the Installer 
password.
2. Record the password in the 
Programming...

386 / Passwords
Modular ICS 6.0 Installer GuideP0992638 03
SysCoord+
The default System Coordinator Plus password is 727587 
(
SCPLUS).
Use CHANGE
, the dialpad, and OK to program the System 
Coordinator Plus password.
SysCoord
The default System Coordinator password is 23646 (
ADMIN).
Basic
The default Basic password is 22742 (
BASIC).
Registration password (MICS-XC only)
For more information about the Registration password, refer to 
the Modular ICS Companion Installer Guide.
Tips - You should only...

Passwords / 387
P0992638 03Modular ICS 6. 0 Installer Guide
Hospitality password
There are two passwords within the Hospitality feature. One 
provides secure access to the administration set for 
programming the service, and one provides secure access to a 
room condition setting from each room set for housekeeping 
staff.
Desk pswd
Change this password frequently, to maintain security.
At Hospitality:
1. Press ≠.
2.Desk pswd:4677 displays.
3. Press CHANGE
. 
4.New pswd: displays
5. Enter a new password,...

388 / Time&Date
Modular ICS 6.0 Installer GuideP0992638 03
Time&Date
The time and date shown on the telephone display is used by 
the system for scheduled features.  It can be changed in 
programming or by using a feature code 
(²¥¥æé÷ä or ²¥¥¡ÝßÜ).
For more information refer to the Modular ICS 6.0 System 
Coordinator Guide. 

System prgrming / 389
P0992638 03Modular ICS 6. 0 Installer Guide
System prgrming
System prgming allows you to set up features and settings 
which are not associated with any specific line or telephone.
Hunt groups
The Hunt groups feature allows a group of sets to be called by 
a single directory number, ensuring that calls are easily routed 
to the appropriate group. 
The default setting for Hunt groups is Broadcast. Hunt group 
statistics are available with Usage Metrics on page 541.
Hunt groups can be...

390 / System prgrming
Modular ICS 6.0 Installer GuideP0992638 03
The hunt group setting impacts other features:
Call forwards set on telephones that are members of a hunt 
group are overridden by the hunt group routing. 
Sets that are members of a hunt group can temporarily 
leave a group by activating the DND feature.
Wireless twinning can be enabled if a hunt group appears 
on the portable as well as the set.
Priority calls to a hunt group will be rejected
Hunt group set numbers cannot be in a...