Nortel Modular Ics 6.0 Installer Guide

Lines / 351
P0992638 03Modular ICS 6. 0 Installer Guide
Remote restrns
Specify the restriction filter to be applied to remote callers 
calling in to the Norstar system on this line. A restriction filter 
is a set or group of restrictions and overrides. 
As with line restrictions, you can apply a different remote 
restriction for normal service and for each of six schedules.
Use CHANGE
 and the dialpad to program the remote restrictions 
for each schedule. 
The default restrictions are shown in the...

352 / Lines
Modular ICS 6.0 Installer GuideP0992638 03
Telco features
This item allows you to assign features that occur from a telco 
level.
VMsg center 1
If you subscribe to a voice message service, you can specify 
which voice message center is used for each external line that 
can receive message waiting indication. 
1. For each line, press CHANGE
 to select a message center: 
1, 2, 3, 4, 5, or N .
Note:  If your system is part of a network that provides a 
central voice mail system on another site,...

Services / 353
P0992638 03Modular ICS 6. 0 Installer Guide
Services
Using Services, you can control three types of service using 
the time of day and the day of week:
alternate call ringing, see page 357
alternate dialing restrictions, see page 360
alternate call routing, see page 361
You can customize services in general under Common 
Settings. Refer to Common settings on page 354.
Within each type of service, you can customize six schedules.
For example, you may want to combine alternate call...

354 / Services
Modular ICS 6.0 Installer GuideP0992638 03
Common settings
Services share the settings for control telephones, schedule 
names, and schedule times.
Control sets
A control telephone turns Services on and off for the lines and/
or telephones assigned to it. You can assign several control 
telephones for your system. 
A control telephone for lines controls Ringing service, 
Restriction service and Routing service for its assigned lines.
A control telephone for telephones controls Restriction...

Services / 355
P0992638 03Modular ICS 6. 0 Installer Guide
Schedule names
The schedule name is shown on the display of the control 
telephone when the schedule is turned on. It identifies the 
active schedule.
Use ≠,  ‘, and CHANGE
 and the dialpad to 
program the name.
Schedule times
Schedule start and stop times are set at times you are most 
likely to want each service to be active.
Use ≠,  ‘, and CHANGE
 and the dialpad to 
program the start and stop times for each schedule, on each 
day. 
Tips - A...

356 / Services
Modular ICS 6.0 Installer GuideP0992638 03
Default schedule times
ScheduleStart timeStop time
Schedule 1: Night23:0007:00
Schedule 2: Evening17:0023:00
Schedule 3: Lunch12:0013:00
Schedule 4: Sched 400:0000:00
Schedule 5: Sched 500:0000:00
Schedule 6: Sched 600:0000:00
Tips - It is only necessary to program start and stop times 
for schedules that are activated automatically. See the 
instructions with Ringing service for information on 
activating schedules.
The time may be entered in...

Services / 357
P0992638 03Modular ICS 6. 0 Installer Guide
Ringing service
At certain times or in certain situations, you may want 
additional telephones to begin ringing for incoming lines. The 
most common use of this feature is when a security desk 
telephone begins to ring for incoming lines after 5:00 p.m., a 
practice often called night service. 
These features are programmed under Ringing service.
Ringing groups
Ringing groups allows you to define groups of extended 
ringing sets. A group can be...

358 / Services
Modular ICS 6.0 Installer GuideP0992638 03
Sched:Night
Indicate how Ringing service should be activated for each of 
the schedules.
Service
Use ≠ and CHANGE
 to change the setting for each 
schedule to : Off, Auto, or Manual.
Off — prevents the service from being activated.
Auto — allows you to program a stop and start time for a 
service. You will be prompted to enter start and stop times.
You can still start and stop the service by entering the 
appropriate Services feature code at a...

Services / 359
P0992638 03Modular ICS 6. 0 Installer Guide
ExtraDial telephone
ExtraDial telephone allows you to assign an additional 
direct-dial telephone in the Norstar system for each schedule 
you use.
Use CHANGE
 and the dialpad to enter the internal number of the 
extra-dial telephone.
Line settings
The ring groups and auxiliary ringer use for Ringing service is 
programmed for each line individually.
Ringing group
You can assign a predefined ringing group to a line for each 
schedule. See Ringing...

360 / Services
Modular ICS 6.0 Installer GuideP0992638 03
To choose a different ringing group assignment, press CHANGE 
and enter the new ringing group number (01-100) 
Aux. ringer
Indicate whether the auxiliary ringer, if installed, also rings 
when Ringing service is on. 
Press CHANGE
 to select either: Y (Yes) or N (No).
Restrn service
Indicate how the alternate dialing restrictions should be 
activated for each of the schedules.
Use ≠ and CHANGE
 to change the setting for each 
schedule: Off,...