Nortel Modular Ics 6.0 Installer Guide

Terminals&Sets / 321
P0992638 03Modular ICS 6. 0 Installer Guide
User prefernces
Any programming a user can do at a set can also be done 
through User prefernces. In the following table, the default 
settings are given in bold. 
For more information, refer to the Modular ICS 6.0 System 
Coordinator Guide.
SettingDescription
ModelAllows you to pre-program the model of Norstar set 
which will use this DN (M7208).
Note: M7100 is used for T7100; M7208 is used for 
T7208, M7310 is used for T7316.
Button...

322 / Terminals&Sets
Modular ICS 6.0 Installer GuideP0992638 03
Restrictions
Restrictions prevent a user from making certain kinds of calls 
from a telephone or from lines that are available at the 
telephone. It also restricts some features.
When you are finished programming restriction settings for 
one telephone, you can copy those settings to other telephones 
by using COPY at the Restrictions ˆ display.
For ISDN PRI, all line restriction changes are applicable to all 
lines.
For more information...

Terminals&Sets / 323
P0992638 03Modular ICS 6. 0 Installer Guide
Once you create the filters, you can assign the restrictions to a 
telephone (Terminals&Sets), to a line (Lines), to a 
particular line on a telephone (Terminals&Sets), and to 
remote callers (Remote access).
1. Press ≠ and enter the number of the restriction 
filter you want to program, or press  ‘ to move 
through all the available filters.
2. Press ≠ to see the first restriction in the filter. 
The first four digits of the number that...

324 / Terminals&Sets
Modular ICS 6.0 Installer GuideP0992638 03
Default filters
Filter 00 permits unrestricted dialing and cannot be changed. 
Filter 01 is pre-programmed with five restrictions and some 
associated overrides.
In Filter 01, restriction 02 and override 005 allow long 
distance directory assistance calls. Filter 01 reflects the fact 
that area codes can now have any digit as a second digit. This 
is designed to be used with the North American dialing plan.
The dialing string 911, the number...

Terminals&Sets / 325
P0992638 03Modular ICS 6. 0 Installer Guide
Note:  Default filters are only loaded at a cold start.
Filters 02, 03, and 04, although not preset with restrictions and 
overrides, are used as default filters in these programming 
headings:
08: 1900 
09: 1900 
10: 5551212 
02 - 99No restrictions or exceptions programmed
FilterHeadingSub-heading
02Terminals&SetsSet restrns:
03LinesLine restrn:
04LinesRemote restrn:
Tips - Filter 00 cannot be changed.
Norstar can have up to 100...

326 / Terminals&Sets
Modular ICS 6.0 Installer GuideP0992638 03
You can use ¥ and £ in a sequence of numbers in either a 
restriction or an override. These characters are often used as 
part of feature codes for other systems or for features provided 
by the central office (the public network).
When restricting the dialing of a central office feature code, 
remember to create separate restrictions for the codes used for 
DTMF and pulse lines. Examples of dialing strings that may be 
restricted for this...

Terminals&Sets / 327
P0992638 03Modular ICS 6. 0 Installer Guide
Set restrns
Set restrictions allows you to assign a restriction filter to a 
telephone to prevent certain numbers from being dialed from 
that telephone. You can also use set restrictions to prevent 
certain features from being used by a telephone. 
Filters
You can assign a different restriction filter for normal service 
and for each of the six schedules. Refer to Services on page 
353 for more information about the schedules.
Use ≠,...

328 / Terminals&Sets
Modular ICS 6.0 Installer GuideP0992638 03
Set lock
You can adjust the amount of personal programming and 
customizing that can be performed at a telephone. 
Press CHANGE
 to select a set lock level: None, Partial, or Full.
Allow last no
A telephone can be prevented from using Last Number Redial 
(²Þ). 
Press CHANGE
 to select the setting: Y (Yes) or N (No).
Allow saved no
A telephone can be prevented from using Saved Number 
Redial (²ßà). 
Press CHANGE
 to select the setting: Y...

Terminals&Sets / 329
P0992638 03Modular ICS 6. 0 Installer Guide
Line/set restrns
Line/set restrns allows you to assign a restriction filter to a 
specific line that can be used for outgoing calls at a specific 
telephone. This type of filter replaces any line or set restriction 
filters which might otherwise apply. It restricts the numbers 
you can dial on a line, but only from that telephone. The same 
line on another telephone can have different restrictions.
As with set restrictions, you can apply a...

330 / Terminals&Sets
Modular ICS 6.0 Installer GuideP0992638 03
Telco features
Telco features can program the way the Norstar works with 
features and services that are based in the public network or 
other outside source. Norstar is designed to work with two of 
these kinds of services: Call Display and an external voice 
message service.
When you are finished programming Telco features settings 
for one telephone, you can copy those settings to other 
telephones by using COPY at the Telco features......