Nortel Bcm 2 5 Telephone Features Instructions Manual

Chapter 8 Track your incoming calls81
Telephone Features Programming Guide
Hold or release your active call before entering Call Log.
The external line is in use.
The repeat call counter, shown with time and date, indicates the 
number of calls you have received from the same caller.
This call was answered at another telephone (227).
This call was logged manually.
This call was not answered.
There are one or more items in your message waiting list, and 
there are one or more new items in your Call Log....

82Chapter 8 Track your incoming calls
P0937240 02 

83
Telephone Features Programming Guide
Chapter 9
Customize your telephone
You can customize your telephone to suit your needs. You can check the functions of buttons using 
button inquiry. You can also:
change the contrast of display
change the language
adjust the ring type and volume
change button assignment
Adjust the contrast on the display
1Press ≤•‡.
2Press a number on the dial pad to select the contrast level you prefer. 
3Press ≥ to save your setting.
On a two-line telephone, you can use the...

84Chapter 9 Customize your telephone
P0937240 02
Change the type of ring
You can select one of four different rings for your telephone. This selection makes it easier to 
identify your telephone in an open office.
1Press ≤•fl.
2Press ⁄, ¤, ‹, ›, or 
. 
You hear the selected ring for two seconds.
3Repeat until you hear the ring you like, then press ≥ or 
.
Adjust the Ring volume
1Press ≤•°‚. 
The telephone rings.
2Press √
to adjust the volume: left end to decrease, and right end to increase.
Button...

Chapter 9 Customize your telephone85
Telephone Features Programming Guide
Programming feature codes 
You can program a feature code to a memory button. 
Any memory button not programmed as an external or internal line, target line, Answer button, or 
Handsfree/Mute button, is available for features.
1Press ≤•‹.
2Press the memory button you want to program with a feature.
3Enter the appropriate feature code you want to assign to the button.
You cannot program the following feature codes on a memory...

86Chapter 9 Customize your telephone
P0937240 02
Default button assignments
During Startup, the installer chooses one of the available templates. Default features are assigned 
automatically to the programmable buttons on telephones in the system, and vary with the template 
and the telephone. The default features appear in the following tables in this chapter.
Rules of default button assignment
Line and Intercom buttons assigned by default templates can be changed in programming. 
Handsfree/Mute and...

Chapter 9 Customize your telephone87
Telephone Features Programming Guide
T7316 Button mapping
Button mapping for the T7316 telephone is unique because this telephone has more buttons than 
the other telephone types. Internal autodial numbers are assigned to buttons, 11, 13, 15, 17, 19, and 
21. Programmed external line buttons appear in descending line order starting with button 1. When 
more than five external lines are programmed, assignment continues on button 6 and continues in 
descending order....

88Chapter 9 Customize your telephone
P0937240 02
T7316 and T7208 telephone button defaults
The default button assignments for the T7316 and T7208 telephones depend on the template 
applied. Table 5 shows the button assignment template for the T7316 telephone. See “T7316 
button assignment template” on page 88. Refer also to “Telephone buttons” on page 25. 
Table 6 shows the button assignment template for the T7208 telephone. See “T7208 button 
assignment template” on page 88.
M7324 Button mapping
Button...

Chapter 9 Customize your telephone89
Telephone Features Programming Guide
Programmed telephone features are assigned to the remaining available buttons. Figure 8 shows 
the button number assignments on the M7324 telephone. See “Button assignment on the M7324 
telephone” on page 89.
Figure 8   Button assignment on the M7324 telephone 
M7324(N) telephone button defaults
The default button assignments for the M7324(N) telephone depend on the template applied. Table 
7 shows the button assignment template...

90Chapter 9 Customize your telephone
P0937240 02
T7100 telephone button defaults
For all templates assigned to the T7100, the one programmable button on the T7100 telephone is 
. 
Move line buttons
You can move external lines to different buttons on your telephone.
1Press ≤•°⁄. 
2Press the line button you want to move.
3Press the button to which you want to move the line.
4Press ®.
You cannot move intercom, answer or Handsfree/Mute buttons on a CAP module. 
11

12

13

14

15
 !...