Norstar Compact 616 Dr5 Installer Guide

Conference  103
 ,You have, activated the Conference
“feature with one call active and
another on hold. Press the line of the
call on hold to bring that person into
the conference.
   
Only the person  the  can process the
conference in any of the ways just described,
The Conference feature supports only three people.
If you are using an M7100 Telephone:
Your conference is connected as soon as you enter the
Conference feature code. There is no need to take the
second call off hold.
To split a conference,...

Change  Class of Service
A Class of Service password is a six digit code that lets you
switch from your current Class of Service to one that lets you dial
numbers prohibited by your current Class of Service.
1.Press   
2.Enter your COS password.
Displays
You will see the first of these displays when entering a COS
password, you may also see the second.
(Blank display) Enter your password.
will not be shown on the display.
You have entered a password that is
not programmed into your system.
Notes
You must...

You can change the way a telephone works in several ways.
Some of the following features are assigned to telephones in
Administration programming. You can turn other features ON and
 at individual telephones. 
 ,
Automatic Handsfreg”  
Automatic Handsfree  you make or answer a call without
having to pick up the receiver or press the  button. The
telephone’s internal microphone and speaker turn on
automatically when you make or answer a call.
The System Coordinator assigns Automatic Handsfree capability...

 106  Customizing your telephone
Dialing Modes
You can set the dialing mode of your telephone.
1.Press 
2.Choose the dialing mode you want.
 supports three dialing modes; Automatic Dial, Pre-Dial,
and Standard Dial. 
 three modes support on-hook dialing.
(On-hook dialing means dialing a call without picking up the
receiver.) The special features of the Automatic and Pre-Dial
modes are available only when you dial on-hook.
The Dialing Modes feature code cannot be programmed onto a
memory button.
Standard...

   Customizing your   
You can pm-dial both external and internal numbers. You must,
however, select  type of  or internal) for
the type of number you have entered.
If all the lines on your telephone are busy, you will not be able to
enter a telephone number.
 
 your telephone  while you are pre-dialing a
number, you can stop the ringing by turning on Do Not Disturb
   This does not affect numbers you are
entering.
This is the display you will see when selecting a Dial mode.
The current dial mode is...

108  Customizing your telephone 
You can select either English or the alternate language at each
telephone. When your system is first installed, all telephones will
use English.
You can program a memory button for one-touch switching
between languages. Program      onto the
button. Pressing the button will switch you back and forth
between English and the alternate language.
[Feature]     cannot be programmed onto a memory
button.
One of the following displays will appear when you enter a
language choice...

Customizing your telephone’/ 109
Press the button of the line you want
to move. Press 
QUIT or 
when you have finished moving lines.
 Press the button you  to move the
line to. Neither of the buttons is
 erased. The lines, or the line and,    feature, simply switch places,
The button you are trying to move is
not a line button. If you are trying to
switch a line and a feature, move the
line to the feature button and not vice
versa.
Pulse/Tone Dialing
Each external line is set to either pulse or tone...

110  Customizing’ your telephone __
This is the display you will see when choosing a ring type.
  1IPress     or NEXT. You
hear the selected ring for two
seconds. Repeat until you hear the
ring you prefer, then press 
or 
Ring Volume
You can set the volume at’which your telephone. rings.
1.Press     The telephone will ring.
2. Press  to adjust the volume.
This is the display you will see while setting Ring volume.
Press either side of the volume bar
 to adjust the volume.
Telephone Administration Lock...

You can program your telephone’s memory buttons to dial
frequently used numbers with the 
 feature.
  
Feature  .   
You can program feature codes onto  telephone’s memory
buttons using the Feature programming feature,
Speed Dial programming
 You can program personal speed dial numbers onto speed dial
codes 71 to 94 using the Personal Speed Dial programming
feature. ,
Compact  System Coordinator Guide 

 
 Dialing” 
Dialing
One of the most important features of your telephone system is
the ability to dial telephone numbers. Many features require you
to dial telephone numbers. The displays associated with dialing
are listed here.
Direct-dial
You can dial a Direct-dial telephone with a single digit. The
Direct-dial telephone is usually in a central location, such as a
receptionist‘s or secretary’s desk. It is usually a Prime telephone
and a Central Answering Position (CAP).
External line access code
The...