Norstar Compact 616 Dr5 Installer Guide

 Dialing  113
You  also use Ring  tell you when a busy line 
becomes available.
.
Using Ring Again cancels any previous Ring Again requests at
your telephone.
   
You can cancel a ring again request by entering the Cancel Ring
Again feature code.
 Number Redial  
You can save the number of the external call you are on
(providing you dialed the call) so that you can call it again later.
1 Press    while you are  on the call.
You can dial a saved number.
1.Press    when you are not on a call.
Related...

114  Dialing 
 Speed Dial 
The Speed Dial feature lets you dial programmed numbers by
entering speed dial codes.
Displays
You will see some of these displays while selecting lines and
dialing telephone numbers and in response to the numbers you
dial.
You are dialing using Pre-Dial. To
erase an incorrect digit, press 
or  When the number is
complete, select a line or lift the
receiver.
Call  21
The telephone you have called has no
internal lines available. You may press
 to use the Ring Again or
Message...

Dialing   
You’ cannot use Ring Again on your
current call. You can only use Ring
Again while you have a busy signal on
. .an internal call or line pool request or  while an internal call is ringing.
  disturb 
  Not Disturb mode. Press  to
use the Ring Again or Messages
 features, or press  to make
, a Priority Call.The telephone you are calling is in Do
The line you have chosen is in use at
another telephone. Use a different
line, or wait until the line is free.
You have entered a number that does
not...

116  Dialing
  number 
Notes
You have tried to use Saved Number
Redial, but have not first saved a
telephone number. The Saved
Number Redial memory is empty.
You have entered the number of a
telephone that is not in service.
The telephone you have called is on
another call. Press  to use the
Ring Again or Message features.
The call you are trying to make is not
allowed for your Class of Service.
Make your call on a line or telephone
that is not restricted, or use a Class of
Service password to bypass...

Do Not Dlsturb  117
Do Not Disturb       
You can stop calls from ringing at your telephone.
Press 
Only Priority Calls will ring at your telephone. A line button will
flash when you receive a call, but the call will not ring.
You can refuse to answer a particular call (including a Priority
Call).
1,.Press    while your telephone is ringing.
Cancel Do Not Disturb
You can cancel Do Not Disturb.
1.Press   
Displays
Notes
If you use Do Not Disturb while an external call is ringing, the call
will be...

 8  Feature Programming
Programming
Program a button 
You can program a feature code onto a memory button.
1. Press 
2.For all telephones other than the M7100 Telephone, select
the button you want to program.
3.Enter the feature code you want to program onto the button.
Erase a button
You can erase a memory button.
1.Press    This is actually the External 
feature code.
2.For all telephones other than the M7100 Telephone, select
the button you want to erase.
3.Erase the button by pressing  or [Hold].
You...

You will see some of the following displays while programming,
erasing, or checking buttons. A variety of displays appear in
Button Inquiry. See the display   for information
applicable to these. displays.
Press  to move either right or left,
or press 
 or  to view a
number that is too long to fit on the
display. Press 
 or  when
you are finished.
 
Enter 1
Feature 
The name of the feature assigned to a
button is displayed when you press
the button. SHOW appears when there
is more information available....

  : 
Press the button you want to check.
Press  or EXIT when you
are finished.
 and To erase a button, press [Hold].
To erase a button, press or
You have tried to use Button Inquiry
while you were on a call or had calls
on hold.
Notes
When this book tells you to enter a feature code, you can do so
by pressing a memory button programmed with that feature code.
In some cases, pressing the button a second time cancels the
feature.
On the M7100 Telephone, Button inquiry shows your internal
number followed by...

Group Listen
You can let people in your office  in on a call.
1.Press     You  hear the caller’s voice
through your telephone’s speaker.
 2; Continue  speak to the caller through the telephone
receiver. The caller will not hear people in your office.
Cancel Group Listen    
You can cancel Group Listen for the current call.
1.Press 
Group Listen is canceled automatically when you hang up the
Group Listen call.
Displays
You may see one of these displays with Group Listen.
You have tried to use Group...

  
Handsfree/Mute
Make calls without lifting the receiver
You can make calls without lifting the receiver. However, you
must have a Prime line assigned to your telephone.
1.Press  The telephone’s internal microphone and
speaker are automatically turned on.
2. Dial your call.
3. Speak normally.
Answer calls without lifting the receiver
You can answer calls without lifting the receiver.
1.When your telephone rings, press  The
telephone’s internal microphone and speaker are
automatically turned on if you...