Norstar Compact 616 Dr5 Installer Guide

Log Defaults  53
Log Defaults
If you subscribe to Call Display services, external calls can be
tracked in a Call Log. Log Defaults programming customizes how
log space is allocated to telephones throughout the system.
9. Call 
Reset All Logs
Use the button and the dial pad to enter the space
allocation for the Call Log at each telephone. Use the  display
button to accept the settings and end Administration
programming. The system automatically reallocates Log space.
Reallocation of Call Log space may...

54  Call Services
Call Services
If you subscribe to Call Display services, external calls are
identified on the display. Call Services programming allows you
to customize how this information is used.
 CODE
 speed dialI
4. Direct-DialI
  Defaults 
Auto Call Info
Auto Call Info
Telephone services
 numbers
 lines
Automatic Call Information allows you to specify which telephone
displays the Call Display information when a call is ringing on an
external line. (After the call is answered, Call Display...

Telephone (Set) Services
Telephone Services programming allows you to customize how
Call Display information is used at each telephone.
 Voice Message”’
Logging telephone 
Logging telephone allows you to specify the telephone that ,
 logs Call Display information for calls on an
external line, The line must appear on that telephone but it does
not have to be a ringing line. Use the  display button to
select the. setting; N (No) or Y (Yes).
Show External Voice Message
If you subscribe to Voice Message...

56  Call Services
First Display
Depending on the services you subscribe to, Call Display
information may contain up to three parts; the name of the caller,
the number of the caller, and the name of the line in your 
system that the  is on. Use the  display button to
select the setting to be shown first for each telephone: Name,
Number or Line. 
Programming hints 
The Call Information  is used to  and scroll through
all of the Call Display  caller name, number and
line number. See the Telephone features...

   
Copying settings
Programmed settings for lines, telephones, and certain
Programmed settings for lines, telephones, and certain   Capabilities can be copied to other lines or telephones. If many Capabilities can be copied to other lines or telephones. If many
lines or telephones require the same settings, program one line lines or telephones require the same settings, program one line
or telephone, and then  those or telephone, and then  those 
  
                
 programming can be copied for Line...

58  Programming reminders
Programming reminders
The Programming reminders are a record of programmable
settings which 
 users may need to know on a day-to-day
basis.
Fill out whatever sections are programmed and must be known. If
more space is required to record the information, first photocopy
the page before you begin. Not all of the programmable features 
may be required information.
Programmable settings can be determined from a review of the
Compact DR5 Programming Record.
Distribute the Programming...

Programming reminders  59
 telephones
User name/locationInternal numberPage zone
I-------
-
Compact  System Coordinator Guide 

60  Programming reminders
Prime 
Prime Telephone operator
Internal number
Lines answered at the Prime telephone
--- ---
---
---
--- ---
--- ---
 zones
Page zoneLocation
1
2
3
Line Pools
PoolAccesscodeUse
A----
6
----
C----
Miscellaneous programming
 Direct-dial telephone
Direct-dial digit
Call Park Prefix digit
Dial first to make external calls
Compact  System Coordinator Guide 

   61
Call  
Pickup GroupNames of members of the group
 
 
 
Compact  System Coordinator Guide 

62  Programming reminders
Service Modes
Service Mode 1
Name
Start
Time
stop 
Time
     
Control telephone
Ringing telephones
Extra-dial telephone
Service Mode 2
Name
Start
Time Time
.     
Control telephone
Ringing telephones
Extra-dial telephone
-------
Service Mode 3
Name
Startstop
Time Time
.. 
 telephone
Ringing telephones
Extra-dial telephone
Compact  System Coordinator Guide