Norstar Compact 616 Dr5 Installer Guide

The system comes programmed with default settings that may be
sufficient initially.  programming is performed by
the System Coordinator, and lets you change settings that
probably have to be updated regularly  staff turnover 
or new business   can also assign some features to
    and  This provides  with real
flexibility in making your telephones work together.
This chapter contains detailed  for programming
System Speed Dial codes, Names for lines and telephones, and
Time and Date information. If you...

  
Determine programming requirements
Read about the available programming settings in this chapter,
then determine how your co-workers would like the features
programmed.
Get the following information:
 the numbers of the installed lines,
 the internal telephone numbers of installed 
telephones,
 the telephone numbers to be programmed into System
Speed Dial,
 the names for lines and telephones,
the lines and internal numbers that are subject to Line
abilities and Set abilities programming,
 the required...

Programming  15
Programming tools
A  telephone
System programming can be performed on an M7208, M7310 or
M7324 Telephone.
The  Programming Overlay 
The    is a  cutout that labels
  used during  This makes it
 easiei for you to ‘recognize the button that  want.’
   
The  Overlay for the M7208 Telephone is
placed over all of the eight buttons. The Programming Overlay for
the  and M7324 Telephones is placed over the top four
memory buttons with indicators. The 
 Programming
Overlays are provided at the end...

16  Administration overview
Administration 
Administration programming lets you change settings for the
entire  system, as well as settings for individual
telephones and external lines.
Pre-programmed default settings may initially be sufficient for
your needs. You can use Administration programming to
customize your Nor-star system by changing these default
settings. In this section, default options are shown in bold type.
The defaults correspond to those assigned during 
installation. The option you...

Administration  
Administration programming has nine headings:
ADMINISTRATION CODE
  dial 
 
2. 
 Time and date 
 Direct-Dial
 Capabilities 
6.  
7. Password
8.  Defaults 
9. Call 
System Speed Dial assigns a two-digit
code  for fast dialing of up to 
telephone numbers from any 
telephone.
Names identifies  lines and
telephones by name.
Time and Date adjusts the time and
date displayed on each 
telephone.
Direct-Dial designates the telephone
that can be reached by dialing a single
digit.
Capabilities...

18  Administration overview
Entering Administration
When your system is first installed, there is no password stored
in the  system. You are not prompted to enter a password
as you enter Administration for the first’time unless your
Customer Service representative has already programmed one
for your system.
To Enter Administration:  
1.Release all calls’ on your telephone.
Enter the Administration access code:
3.If the display changes to Password: , enter the
Administratbn password. (The password is not...

2.
3.
4.
5.
6.
7.
8.
9.
Administration overview  19
Moving through Administration 
To program a setting, you must first locate the correct heading.
 To do this, scan through th of Administration using the
 and  buttons. 
.To  through  headings:
After entering  the display shows
 speed dial. 
Press 
The display shows
Press
The display shows
Press
The display shows
Press
The display shows
Press
The display shows
Press 
The display shows
Press
The display shows
Press[Next].
The display shows
Press .
The...

20  Administration overview
Using the Overlay
The indicators show which buttons can be used at that
programming step. The functions on these buttons allow you to
move through the headings and subheadings of 
programming.  
   up  the hierarchy of headings and
subheadings. 
 moves down in the hierarchy of headings and
subheadings, or to begin programming settings
under a heading or subheading,
moves to the next heading, subheading, or
programmable setting.
 to the previous heading, subheading, or...

Administration overview  
Programming Overlay for the M7208 Telephone (top) and for the
 and M7324 Telephone (bottom)
Compact  System Coordinator Guide 

22  Administration overview
The  display buttons
Display buttons perform many functions. Depending on where
you are in programming, one, two, or three display buttons may
be available, at any one time. Press one of the display buttons to
select the function that you want.
Display message
Display button label
Display button
The most common display button labels are:
  programmable setting.
 moves the cursor one space backward (backspace)
and delete a character, allowing you to re-enter a
number or...