NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 1 08
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
4. DATA TABLE:
Service Class A : Initial Data
YY/YYY SERVICE 
REST. 
CLASS (A)SETTING DATA
No. MEANING DATA MEANING
00 Call Forwarding – All Calls 00
150
1
 
Restricted
Allow
01 Call Hold
02 Trunk Queueing – Outgoing
03 Call Back
04 Guest Name Display via PMS 0
1 Allow
Restricted
05 Executive Override (Calling side) 0
1 Restricted
Allow
06 System Speed Dialing
07 Station Speed Dialing
08 Paging Access...

ND-45669 (E) CHAPTER 3
Pag e 1 09
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
24 Message Waiting Lamp set/reset from the sta-
tion00
150
1 Restricted
Allow
25 Timed Queue
26 Call Forwarding – All Calls – Outside
27 Call Forwarding – No Answer – Outside
28 Call Forwarding – Busy Line – Outside
29 Call Forwarding – Busy Line – Outside/
No Answer – Outside
30 Account Code
31 Authorization Code/Forced Account Code
32 BGM on Multiline Terminal
33 Digital Announcement Trunk Access...

CHAPTER 3 ND-45669 (E)
Page 110 Addendum-002
Revision 2.2 JANUARY, 1999
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
Note:Monitoring telephone conversations may be illegal under certain circumstances and laws.
 Consult a legal ad-
visor before implementing the monitoring of telephone conversations.
 Some federal and state laws require a
party monitoring a telephone conversation to use beeptone(s), to notify all parties to the telephone conversa-
tion, and/or to obtain consent from all...

ND-45669 (E) CHAPTER 3
Addendum-002 Page 110-1
JANUARY, 1999 Revision 2.2
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
Service Class A : Initial Data
YY/YYY SERVICE 
REST. 
CLASS (A)SETTING DATA
No. MEANING DATA MEANING
115 PS Call Forwarding-Not Available 00
150
1 Allow
Restricted
116 Voice Guide (Validity of data set by CM48 Y=2 
first data 12, 13, 14.)0
1 Restricted
Allow
117 Roaming Service 0
1 Allow
Restricted
119 Simultaneous Paging Class
120 Dynamic Dial Pad
124 Remote Hold
127 WCS...

THIS PAGE INTENTIONALLY LEFT BLANK.
CHAPTER 3 ND-45669 (E)
Page 110-2 Addendum-001
Revision 2.1 AUGUST, 1998
This page is for your notes. 

ND-45669 (E) CHAPTER 3
Pag e 1 11
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
Note:To provide the Multiline Terminal Attendant Position, data “0” must be assigned to a different Service Restric-
tion Class Number than for regular Multiline Terminal Stations.
For example:
CLASS No.00 (ATT Position) CLASS No.15 (Station)
YY=71 0 1
YY=73 0 1
Service Class B : Initial Data
YY/YYY SERVICE 
REST. 
CLASS (B)SETTING DATA
No. MEANING DATA MEANING
53 TAS Service 00
150
1
 
Restricted...

CHAPTER 3  ND-45669  (E)
C M 15
MAT
Serv ic e  Class C   : In itia l Data
~
~
~
~
~
~
~
~
~
~
~
~ 

ND-45669 (E) CHAPTER 3
Pag e 1 13
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
Note 1:The tone indication pattern is assigned by the combination of data in YY=83 and YY = 84
Note 2:The result of a Switch Hook Flash during a station-to-station call is specified by the combination
of data in YY= 88 and YY = 89.
Note 3:The result of a Switch Hook Flash during a C.O. line Connection is specified by the combination
of data in YY=90 and YY = 91.
Note 4:Automatic Allocation is...

CHAPTER 3 ND-45669 (E)
Pag e 1 14
Revision 2.0
CM16
COMMAND CODE
TITLE:
CALL PICKUP GROUP/GROUP DIVERSION GROUP
16
MAT
1. FUNCTION:
This command is used to assign stations to a Call Pickup Group and a Group Diversion Group.
2. PRECAUTION:
(1) The maximum number of stations which can be assigned to a Call Pickup Group is 60.
(2) There is no limitation to the number of Call Pickup Groups.
(3) An individual station cannot be assigned to more than one Call Pickup Group.
(4) A maximum of 31 Group Diversion...

ND-45669 (E) CHAPTER 3
Pag e 1 15
Revision 2.0
CM16
COMMAND CODE
TITLE:
CALL PICKUP GROUP/GROUP DIVERSION GROUP
16
MAT
4. DATA TABLE:
Y STATION NUMBER (A) SETTING DATA
No. MEANING DATA MEANING DATA MEANING
0 Assignment of Station 
Numbers to be included 
in a Call Pickup GroupX
XXXXStation Numbers (A) X
XXXXStation Number (B)
When assigning station numbers to a Call Pickup Group, only two station 
numbers can be assigned per operation.  Thus, by repeating the operation as 
often as required, all the...