Home > NEC > Communications System > NEC Neax2000 Ivs Command Manual

NEC Neax2000 Ivs Command Manual

Here you can view all the pages of manual NEC Neax2000 Ivs Command Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 161

CHAPTER 3 ND-45669 (E)
Pag e 1 36
Revision 2.0
CM20
COMMAND CODE
TITLE:
NUMBERING PLAN
20
MAT
808
(2/3)2/3 digits-Station CM41 Y = 0
F = 13
809
(2/4)2/4 digits-Station
810
(3/4)3/4 digits-Station
811
(2/3/4)2/3/4 digits-Station
A00
(VRCRC)Digital Announcement Trunk Access 
(Record)CM10, CM15
YY = 33
A01
(VRCRP)Digital Announcement Trunk Access 
(Replay)
A02
(VRCDL)Digital Announcement Trunk Access 
(Delete)
A03
(ANRC)Announcement Service (Record) CM10, 
CM15 YY = 34 – 39
CM49 YY = 00
CM35 YY = 69 – 73...

Page 162

ND-45669  (E)   CHAPTER 3
CM 20
MAT
A13 

Page 163

CHAPTER 3 ND-45669 (E)
Pag e 1 38
Revision 2.0
CM20
COMMAND CODE
TITLE:
NUMBERING PLAN
20
MAT
A30
(IPGC0)Internal Zone Paging Group 0
For callingCM56 YY = 00 – 07
CM15 YY = 49
CM90
A31
(IPGC1)Internal Zone Paging Group 1
A32
(IPGC2)Internal Zone Paging Group 2
A33
(IPGC3)Internal Zone Paging Group 3
A34
(IPGC4)Internal Zone Paging Group 4
A35
(IPGC5)Internal Zone Paging Group 5
A36
(IPGC6)Internal Zone Paging Group 6
A37
(IPGC7)Internal Zone Paging Group 7
A38
(IPGA0)Internal Zone Paging Group 0
For...

Page 164

ND-45669 (E) CHAPTER 3
Pag e 1 39
Revision 2.0
CM20
COMMAND CODE TITLE:
[CM20] Numbering Plan
NUMBERING PLAN 20
MAT
A46
(MW/RS)Message Waiting/Message Reminder (Search) CM15 YY = 47, 48
CM13 – 03
CM51 YY = 15
CM90 A47
(MW/RA)Message Waiting/Message Reminder 
(Retrieve)
A48
(MRS)Message Reminder (Set)
A49
(MRC)Message Reminder (Cancel)
A50
(SY3/1)System Speed Dialing (Origination) For 1000 memories
(1000-Slot Memory Block 
No.3)
Maximum of 16 digitsCM08–110 = 0
CM08–252 = 1
CM74
A51
(SY1/1)System Speed...

Page 165

CHAPTER 3 ND-45669 (E)
Page 140 Addendum-002
Revision 2.2 JANUARY, 1999
CM20
COMMAND CODE
TITLE:
NUMBERING PLAN
20
MAT
ASSIGNMENT DATA
REMARKSRELATED
COMMAND
DATA MEANING
A63
(V/TON)Voice Call/Ring Tone programming For Multiline Terminal
A64
(AZP)All Zone Internal Paging For calling CM08 – 158
A65 Voice Message Waiting Service-Individual
All Clear when the called station is no answer
A80 Split Call Forwarding - All Calls (Entry)
A81 Split Call Forwarding - All Calls (Cancel)
A82 Split Call Forwarding -...

Page 166

ND-45669 (E) CHAPTER 3
Addendum-002 Page 140-1
JANUARY, 1999 Revision 2.2
CM20
COMMAND CODE
TITLE:
NUMBERING PLAN
20
MAT
ASSIGNMENT DATA
REMARKSRELATED
COMMAND
DATA MEANING
100
(RT00)
101
162
163
(RT63)Trunk Route 00
Trunk Route 01
Trunk Route 62
Trunk Route 63Data assignment for Trunk 
Routes that correspond to 
access codes for outgoing 
trunk calls (COT, ODT, 
etc.)CM30
200
(RTA00)
201
230
231
(RTA31)Route Advance Block 00
Route Advance Block 01
Route Advance Block 30
Route Advance Block 31Data is to...

Page 167

THIS PAGE INTENTIONALLY LEFT BLANK.
CHAPTER 3 ND-45669 (E)
Page 140-2 Addendum-001
Revision 2.1 AUGUST, 1998
This page is for your notes. 

Page 168

ND-45669 (E) CHAPTER 3
Pag e 1 41
Revision 2.0
CM20
COMMAND CODE TITLE:
[CM20] Numbering Plan
NUMBERING PLAN 20
MAT
Note:Monitoring telephone conversations may be illegal under certain circumstances and laws.  Consult a legal
advisor before implementing the monitoring of telephone conversations.  Some federal and state laws re-
quire a party monitoring a telephone conversation to use beeptone(s), to notify all parties to the telephone
conversation, and/or to obtain consent from all parties to the...

Page 169

CHAPTER 3 ND-45669 (E)
Pag e 1 42
Revision 2.0
CM21
COMMAND CODE
TITLE:
SINGLE DIGIT ACCESS CODE
21
4. DATA TABLE:
1. FUNCTION:
This command sets a single-digit code to be recognized under timing start condition.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
Y
ACCESS CODESETTING DATA
No. MEANING DATA MEANING
0
1
2
3Numbering Plan 0
1
2
3X: 0-9, A (*), B (#) 047
051Service Feature Access Code
(See CM20 Data Table)
100
163Trunk Route 00
Trunk Route 63
200
231Route Advance Block 00
Route Advance Block 31...

Page 170

ND-45669 (E) CHAPTER 3
Pag e 1 43
Revision 2.0
CM22
COMMAND CODE
TITLE:
ROUTE ADVANCE
22
4. DATA TABLE:
Note:In the following example, seven priorities are defined by using a priority (Priority 3 of Route Advance
Block 00) to “point” to another Route Advance Block 01.
1. FUNCTION:
This command is used to assign alternative trunk routes to each Route Advance Block.
2. PRECAUTION:
A maximum of seven consecutive priorities can be assigned.
3. ASSIGNMENT PROCEDURE:
YY
PRIORITY ORDERSETTING DATA
No. MEANING...
Start reading NEC Neax2000 Ivs Command Manual

Related Manuals for NEC Neax2000 Ivs Command Manual

All NEC manuals