NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 9 8
Revision 2.0
CM11
COMMAND CODE
TITLE:
VIRTUAL-LINE NUMBER
11
MAT
Note 1:Automatic Intercom Numbers are assigned as shown below:
AUTOMATIC AUTOMATIC AUTOMATIC
INTERCOM INTERCOM INTERCOM
GROUP No.(A) No.(B)
00 A000 A100
01 A001 A101
31 A031 A131
Note 2:Manual Intercom Numbers are assigned as shown below:
MANUAL
INTERCOM
GROUP INTERCOM NUMBER
00 A200, A300, A400, A500, A600, A700
01 A201, A301, A401, A501, A601, A701
24 A224, A324, A424, A524, A624, A724
Note 3:Dial Intercom...

ND-45669 (E) CHAPTER 3
Pag e 99
Revision 2.0
CM12
COMMAND CODE
TITLE:
STATION CLASS-1
12
MAT
1. FUNCTION:
The features for each station are determined by assigning Station Class-1 to each station number.
2. PRECAUTION:
(1) When assigning Station Class-1 to Multiline Terminal using this command, enter “X-XXXX (Pri-
mary Extension Number)” of FX-FXXXX, which is assigned by CM10, as the first data.
(2) This command is included in MAT mode menu “A1” (Station Number & Class [COM01]).
(3) The following table...

CHAPTER 3 ND-45669 (E)
Pag e 1 00
Revision 2.0
CM12
COMMAND CODE
TITLE:
STATION CLASS-1
12
MAT
4. DATA TABLE:
3. ASSIGNMENT PROCEDURE:
: Initial Data
YY SETTING DATA
No. MEANING DATA MEANING
00
(PB/DP)DTMF or DP
(This data setting is not 
required for a Multiline 
Terminal)1
2
3DP
DTMF
DP / DTMF
01
(RSCA
RSCB)
Trunk Restriction
ClassXX 
Contents of Day/Night Trunk Restriction Class 
02
(SFCA
SFCB)Service Restriction Class 
A•BXXXX
  
Note:The features available in each class are 
programmed in CM15 YY =...

ND-45669 (E) CHAPTER 3
Addendum-002 Page 101
JANUARY, 1999 Revision 2.2
CM12
COMMAND CODE
TITLE:
STATION CLASS-1
12
MAT
: Initial Data
YY SETTING DATA
No. MEANING DATA MEANING
03
(TEL)Kind of Telephone 00
01
02
03
00
01
02
03
04
05
06
07
08
15
 
House Phone 0
House Phone 1
House Phone 2
House Phone 3
FAX Call Station Group No. 0
FAX Call Station Group No. 1
FAX Call Station Group No. 2
FAX Call Station Group No. 3
Hot Line (See CM52 YY = XX: Calling Side [0])
Automatic Intercom (See CM11, CM56 YY = 10)...

CHAPTER 3 ND-45669 (E)
Page 102 Addendum-002
Revision 2.2 JANUARY, 1999
CM12
COMMAND CODE
TITLE:
STATION CLASS-1
12
MAT
Note 1:This command setting is required when Designation of FAX Station CM51 YY=14 is utilized.
Note 2:For PN-4DLCD or 4DLCA cards, this data must be assigned to first LEN (Level 0) of each 4-port DLC
card.
For PN-8DLCJ cards, this data must be assigned to first (Level 0) and fifth (Level 4) LENS of each 8-port
card.
For D
term II (4-wire DLCs), this data is not required.
Note 3:This...

ND-45669 (E) CHAPTER 3
Pag e 1 03
Revision 2.0
CM12
COMMAND CODE
TITLE:
STATION CLASS-1
12
MAT
Note 1:Level 0 for 4DLC cards, Level 0 and Level 4 for 8DLC (8 port) cards.
Note 2:Level 1 - 3 for 4DLC (4 port) cards.
Levels 1 - 3 and 5 - 7 for 8DLC (8 port) cards.
1st LEN 
(Level 0) Note 12nd through 4th LEN 
(Level 1-3) Note 2X: Available
–: Not available
Series E (Series E mode)/Series III/E-Pro Series E (Series E mode)/Series III/E-Pro X
Series E (Series E mode/Series III mode) ATTCON/DSS Console X...

CHAPTER 3 ND-45669 (E)
Pag e 1 04
Revision 2.0
CM13
COMMAND CODE
TITLE:
STATION CLASS-2
13
MAT
1. FUNCTION:
The features for each station are to be designated by assigning Station Class-2 for each station number.
2. PRECAUTION:
(1) When assigning Station Class-2 to a Multiline Terminal by this command, enter “X-XXXX (Pri-
mary Extension Number)” of FX-FXXXX, which is assigned by CM10, as the first data.
(2) When a station has been set as an analog data station (YY=07), the following limitations are...

ND-45669 (E) CHAPTER 3
Addendum-001 Page 105
AUGUST, 1998 Revision 2.1
CM13
COMMAND CODE
TITLE:
STATION CLASS-2
13
MAT
4. DATA TABLE:
3. ASSIGNMENT PROCEDURE:
: Initial Data
YY SETTING DATA
No. MEANING DATA MEANING
00
(DNDS)Do Not Disturb-System 0
1To provide
Not provided
01
(RCOF)Room Cut Off-System 0
1To provide
Not provided
02
(OFAL)Off-Hook Alarm 0
1To provide (CM51 YY = 12)
Not provided
03
(MSGW)Message Waiting Service/Message
Reminder Service0
1To provide (For station with MW lamp)
Not provided
04...

CHAPTER 3 ND-45669 (E)
Page 106 Addendum-001
Revision 2.1 AUGUST, 1998
CM13
COMMAND CODE
TITLE:
STATION CLASS-2
13
MAT
13
(FRONT)Ordinary Station or Front Station 0
1Message Waiting Front Desk Instrument
Ordinary Station
Note:MW Lamp of calling station is
turned off when Message Wait-
ing Front Desk Terminal an-
swers (see CM08-233).
14
(HNTA)Station Hunting for incoming calls other than di-
rect-in termination calls0
1Ineffective
Effective
15
(HNTB)Station Hunting for direct-in termination calls 0...

ND-45669 (E) CHAPTER 3
Pag e 1 07
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
1. FUNCTION:
The restriction of each feature is to be set for each service restriction class assigned to the stations. There
are three kinds of Service Restriction Class: A, B and C. The service features to be restricted by these
Service Restriction Classes are different.
2. PRECAUTION:
This command is included in MAT mode menu “E11” (Service Restriction [COM02]).
3. ASSIGNMENT PROCEDURE:
ST +...