NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 1 44
Revision 2.0
CM23
COMMAND CODE
TITLE:
TENANT DEVELOPMENT
23
4 . DATA  TA B L E :
1. FUNCTION:
Trunk routes and features are assigned by developing access codes for each tenant. For tenant assign-
ments requiring development of route advance and kind of calling terminal data for each trunk route
assignment, each development and the corresponding trunk routes are to be assigned using CM22 and
CM24.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
YY
TENANTSETTING DATA
RELATED...

ND-45669 (E) CHAPTER 3
Pag e 1 45
Revision 2.0
CM24
COMMAND CODE
TITLE:
KIND OF CALLING TERMINAL DEVELOPMENT
24
4. DATA TABLE:
1. FUNCTION:
For each access code assigned to a calling terminal block, a trunk route can be assigned based on which
type of terminal is placing the call. For calling terminal assignments requiring development of route
advance and kind of special terminal data for trunk route assignments, each of these developments and
the corresponding trunk routes are assigned using CM22 and...

CHAPTER 3 ND-45669 (E)
Pag e 1 46
Revision 2.0
CM25
COMMAND CODE
TITLE:
KIND OF SPECIAL TERMINAL DEVELOPMENT
25
4. DATA TABLE:
1. FUNCTION:
For each access code assigned to a special terminal block, a trunk route can be assigned based on which
type of special terminal (ordinary station or analog data station) is placing the call. For special terminal
assignments requiring development of route advance data for trunk route assignment, route advance
development and the corresponding trunk routes are...

ND-45669 (E) CHAPTER 3
Pag e 1 47
Revision 2.0
CM26
COMMAND CODE
TITLE:
CLOSED NUMBER DEVELOPMENT
26
MAT
1. FUNCTION:
For each access code assigned to a closed number block, a trunk route is selected and the system is
assigned to
a) Repeat the access code as a dialed digit (to the C.O.)
b) To add digits to convert the access code into other digits
These assignments are completed prior to dialing the rest of the number.
For closed number assignments requiring development of route advance, tenant, and kind...

CHAPTER 3 ND-45669 (E)
Pag e 1 48
Revision 2.0
CM26
COMMAND CODE
TITLE:
CLOSED NUMBER DEVELOPMENT
26
MAT
4. DATA TABLE:
: Initial Data
Y
No.CLOSED NUMBER BLOCK No. SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
0
(RT Data)00
31Closed Number Block 00
Closed Number Block 31100
163Trunk Route 00
Trunk Route 63CM30
200
231Route Advance Block 00
Route Advance Block 31CM22
300
323Tenant Block 00
Tenant Block 23CM23
400
419Kind of Calling Terminal 
Development 00
Kind of Calling Terminal 
Development...

ND-45669 (E) CHAPTER 3
Pag e 1 49
Revision 2.0
CM29
COMMAND CODE
TITLE:
NUMBERING PLAN TENANT GROUP
29
MAT
4. DATA TABLE:
1. FUNCTION:
When each tenant has its own numbering plan in a multiple-tenant system, all the tenants are divided into
four groups, each consisting of tenants having identical features in their numbering plans. Numbering
Plan Group data is then assigned on a tenant basis.
2. PRECAUTION:
(1) If the data is not assigned (“NONE”), then Numbering Plan Group 0 is used for all tenants.
(2)...

CHAPTER 3  ND-45669  (E)
C M 2A
4.  DAT A TABL E:
1.  FUN CTIO N:
ST+ 2A Y+ DE +  +DE+   +EX E
~
[C M2A]   ID C od e As sig nme nt w it h  M P 

ND-45669  (E)   CHAPTER 3
CM 2A
Note  1 : Au tho riz a tion Co des and F orc e d  A ccoun t C ode s a re bo th av ail abl e f o r c han ging c la ss o f se rv ic e.
3   Serv ice  Cla ss  A /B  f o r
XX
S erv ic e  C la ss B
S erv ic e  C la ss A
XX
~
XX
S erv ic e  C la ss B
S erv ic e  C la ss A
XX 

CHAPTER 3  ND-45669  (E)
C M 30
MAT
1.  FUN CTIO N:
(00 0–255)
T R UNK
DEEXE
~~~
~~~ 

ND -4 5669 ( E)  CHAPTER 3
CM 30
MAT
: In it ia l D ata