NEC Neax2000 Ivs Circuit Card Manual
Have a look at the manual NEC Neax2000 Ivs Circuit Card Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ND-45504 (E) CHAPTER 4 Page 43 Revision 2.0 PN-PW00 (EXTPWR) (3) Switch Setting The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Note:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card. Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK MB (Toggle SW) NoteUPFor make-busy (–48 V power off) For normal operation (–48 V power on) ON DOWN
CHAPTER 4 ND-45504 (E) Pag e 44 Revision 2.0 PZ-PW86 (PWR) PZ-PW86 (PWR) 1. Locations of Lamps, Switches, and Connectors PZ-PW86 (PWR) Card 2. Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION MJ Red Lights upon occurrence of a major trouble MN Yellow Lights upon occurrence of a minor trouble ON Green Remains lit while the operating power is being supplied FRONT VIEW SIDE VIEWMJ MN ONMN MJ ON GND –27V FG GND –27V FG OFFON – 240 100/120 1 2 ON SW102
ND-45504 (E) CHAPTER 4 Page 45 Revision 2.0 PZ-PW86 (PWR) (3) Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK 1Set to ON. 2ONStandard setting (for equalize charging) OFFNot used SW ONFor turning AC source power on OFFFor turning AC source power off 100/120 240AC INPUT: 90 V - 138 V DOWNAC INPUT: 180 V - 276 V CAUTION • When the operating power is being supplied to this circuit card, do not plug/unplug this circuit card into/from its mounting slot. • Set the appropriate voltage by using the AC voltage select switch (slide switch) before powering on. 1 2 ON ON I (ON) O (OFF) UP
CHAPTER 4 ND-45504 (E) Pag e 46 Revision 2.0 PZ-PW86-A (PWR) PZ-PW86-A (PWR) 1. Locations of Lamps, Switches, and Connectors PZ-PW86-A (PWR) Card 2. Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION MJ Red Lights upon occurrence of a major trouble MN Yellow Lights upon occurrence of a minor trouble ON Green Remains lit while the operating power is being supplied FRONT VIEW SIDE VIEWMJ MN ONMN MJ ON GND –27V FG GND –27V FG OFFON – 240 100/120 1 2 ON SW102SW102
ND-45504 (E) CHAPTER 4 Page 47 Revision 2.0 PZ-PW86-A (PWR) (3) Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SW102 PRESS MOMENTARILYTo start each PIM on battery power, when AC power is not provided (Switch “SW” must be ON). 1 Set to ON. 2ON For float charging OFFStandard setting for equalize charging (Set to equalize for Gel cell or no battery.) SW ON For turning AC source power on OFF For turning AC source power off 100/120 240AC INPUT: 90 V - 138 V DOWN AC INPUT: 180 V - 276 V CAUTION • When the operating power is being supplied to this circuit card, do not plug/unplug this circuit card into/from its mounting slot. • Set the appropriate voltage by using the AC voltage select switch (slide switch) before powering on. 1 2 ON ON I (ON) O (OFF) UP
CHAPTER 4 ND-45504 (E) Pag e 48 Revision 2.0 PZ-PW86 (C) (PWR) PZ-PW86 (C) (PWR) 1. Locations of Lamps, Switches, and Connectors PZ-PW86(C) (PWR) Card 2. Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION MJ Red Lights upon occurrence of a major trouble MN Orange Lights upon occurrence of a minor trouble ON Green Remains lit while the operating power is being supplied FRONT VIEW BATT2 MN MJ ONBATTERY SIDE VIEW GND –27V FG OFFON 240VAC 100/120VAC 2ON 2 1 ON SW102 START SIG 1 SW1 BATT1 AC INPUTMODE SW301
ND-45504 (E) CHAPTER 4 Page 49 Revision 2.0 PZ-PW86 (C) (PWR) (3) Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK MODE 1 Always set to OFF 2Float charging, for sealed batteries (Normal Setting). OPTION: Periodic Equalize charging of external vented batteries. OFFFlaot charging, for vented batteries only. SW1 For turning AC power and the battery on OFFFor turning AC power and the battery off AC INPUT: 90 V - 138 V DOWNAC INPUT: 180 V - 264 V SW102 PRESS MOMENTARILYTo start each PIM on battery power, when AC power is not provided (switch “SW” must be ON) SW301 1ON CR Voltage: 75 Vrms CR Voltage: 90 Vrms 2Frequency: 20 Hz OFFFrequency: 25 Hz ON 1 2 OFF ON OFF (O) ON (I) ON 240 VAC 100/120 VAC UP 25Hz 1 2 OFF 90V 20Hz ON 75V OFF ON
CHAPTER 4 ND-45504 (E) Pag e 50 Revision 2.0 PZ-PW86 (D) (PWR) PZ-PW86 (D) (PWR) 1. Locations of Lamps, Switches, and Connectors PZ-PW86(D) (PWR) Card 2. Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION MJ Red Lights upon occurrence of a major trouble MN Orange Lights upon occurrence of a minor trouble ON Green Remains lit while the operating power is being supplied FRONT VIEWBATT2 MN MJ ON BATTERY SIDE VIEW GND –27V FG OFFON 240VAC 100/120VAC2ON 2 1 ON SW102 START SIG 1 SW1 BATT1 AC INPUTMODE SW301 (CN103) SIG (CN103)
ND-45504 (E) CHAPTER 4 Page 51 Revision 2.0 PZ-PW86 (D) (PWR) (3) Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK MODE 1 Always set to OFF 2Float charging, for sealed batteries (Normal Setting). OPTION: Periodic Equalize charging of external vented batteries. OFFFlaot charging, for vented batteries only. SW1 For turning AC power and the battery on OFFFor turning AC power and the battery off AC INPUT: 90 V - 138 V DOWNAC INPUT: 180 V - 264 V SW102 PRESS MOMENTARILYTo start each PIM on battery power, when AC power is not provided (switch “SW” must be ON) SW301 1ON CR Voltage: 75 Vrms CR Voltage: 90 Vrms 2Frequency: 20 Hz OFFFrequency: 25 Hz ON 1 2 OFF ON OFF (O) ON (I) ON 240 VAC 100/120 VAC UP 25Hz 1 2 OFF 90V 20Hz ON 75V OFF ON
CHAPTER 4 ND-45504 (E) Page 52 Addendum-001 Revision 2.1 JULY, 1998 3. LAMP INDICATIONS AND SWITCH SETTINGS OF APPLICATION CIRCUIT CARDS Table 4-2 below shows the application circuit cards to be explained in this section. * MB=Make Busy Table 4-2 Table of Application Circuit Cards NAME (FUNCTIONAL NAME)EXISTENCE OF LAMPS X: PROVIDED —: NOT PROVIDEDEXISTENCE OF SWITCHES X: PROVIDED —: NOT PROVIDEDEXTRACTION/INSER- TION WITH POWER ON X: ALLOWED D: ALLOWED AFTER MB* —: NOT ALLOWED REFERENCE PAG E PN-AP00-A (AP00) XXD53 PN-AP01 (AP01) XXD59 PN-BRTA (BRI) XXD62 PN-2BRTC (BRI) XXD65-1 PN-CC00 (ETHER) XX X66 PN-CC01 (ETHER) XXD68-1 PN-CK00 (PLO) XXD69 PN-24DTA (DTI) XXD72 PN-24DTA-A (DTI) XXD75 PN-30DTC/30DTC-A (DTI)XXD78-1 PN-ME00 (EXTMEM) XXD79 PN-4RSTB (MFR) XXD84 PN-4RSTC (CIR) XXD86 PN-SC00 (CCH) XXD88 PN-SC01 (DCH) XXD91 PN-SC02 (ICH) XXD94 PN-SC03 (ICH) XXD96 PN-SC03 (CSH) XXD98