NEC Neax2000 Ivs Circuit Card Manual

							ND-45504 (E) CHAPTER 4
Page 23
Revision 2.0
PN-BS00-A/PN-BS00-B (BS00)
(3) Switch Settings
The figure in the SWITCH NAME column and the position in   in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
Note:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card.
Switch Settings
SWITCH NAMESWITCH 
NUMBERSETTING 
POSITIONFUNCTION CHECK
MB (Toggle SW)
Note UPFor make-busy
For normal operation
ON
DOWN 
						

							CHAPTER 4 ND-45504 (E)
Pag e 24
Revision 2.0
PN-BS01-A (BS01)
PN-BS01-A (BS01)
1. Locations of Lamps, Switches, and Connectors
PN-BS01-A (BS01) Card
2. Lamp Indications
This card has no indicator lamps.
MB
CN2
CN1
SW13 
						

							ND-45504 (E) CHAPTER 4
Page 25
Revision 2.0
PN-BS01-A (BS01)
(3) Switch Settings
The figure in the SWITCH NAME column and the position in    in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
Note:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card.
Switch Settings
SWITCH NAMESWITCH 
NUMBERSETTING 
POSITIONFUNCTION CHECK
MB (Toggle SW)
NoteUP For make-busy
For normal operation
SW13 (Dip SW)
1, 5ON Set SW13 according to the mounting location of this 
card.
OFF
2, 6ON
OFF
3, 7ON
OFF
4, 8ON
OFF
ON
DOWN
12345678 ON
SWITCH 
No.SW13
-1, 5SW13
-2, 6SW13
-3,7SW13
-4, 8 MOUNTING
LOCATION
PIM1 ON OFF OFF OFF
PIM2, PIM3 OFF ON OFF OFF
PIM4, PIM5 OFF OFF ON OFF
PIM6, PIM7 OFF OFF OFF ON 
						

							CHAPTER 4 ND-45504 (E)
Pag e 26
Revision 2.0
PN-BS01-B (BS01)
PN-BS01-B (BS01)
1. Locations of Lamps, Switches, and Connectors
PN-BS01-B (BS01) Card
2. Lamp Indications
This card has no indicator lamps.
MB
CN2
CN1
SW0 
						

							ND-45504 (E) CHAPTER 4
Page 27
Revision 2.0
PN-BS01-B (BS01)
(3) Switch Settings
The figure in the SWITCH NAME column and the position in    in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
Note 1:Set the groove on the switch knob to the desired switch position.
Note 2:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit
card.
Switch Settings
SWITCH NAMESWITCH 
NUMBERSETTING 
POSITIONFUNCTION CHECK
SW0 (Rotary SW)
Note 1 0 - 3Set this rotary switch to match the location in which this circuit 
card is to be mounted.
0For mounting this card in PIM1
1For mounting this card in PIM2, 3
2For mounting this card in PIM4, 5
3For mounting this card in PIM6, 7
4 - FNot used
MB (Toggle SW)
Note 2UPFor make-busy
For normal operation
ON
DOWN 
						

							CHAPTER 4 ND-45504 (E)
Pag e 28
Revision 2.0
PN-CP00 (MP)
PN-CP00 (MP)
1. Locations of Lamps, Switches, and Connectors
PN-CP00 (MP) Card
2. Lamp Indications
Lamp Indications
LAMP NAME COLOR FUNCTION
RUN Green Flashes at 120 IPM while the circuit card is operating normally.
CLKIN Green Lights while receiving clock signals to the PLO oscillator.
SW3
RUN
SW1
SW2
CLKIN
JP0
RS 
						

							ND-45504 (E) CHAPTER 4
Addendum-001 Page 29
JULY, 1998 Revision 2.1
PN-CP00 (MP)
(3) Switch Settings
Switch Settings 
SWITCH NAMESWITCH 
NUMBERSETTING 
POSITIONFUNCTION CHECK
SW3 (Rotary SW)
Note0 ~ FOn Line (Call processing is in progress)
2Off Line (Call processing is stopped)
• I/O port: Depending on 
CM40 YY=08
3Off Line (Call processing is stopped)
• I/O port: 1200 bps (Fixed)
B For clearing the office data
C For setting the resident system program
1, 4 ~ 9
A, D ~ FNot used
SW1 (Push SW) For initializing the CPU
SW2 (Piano Key SW)
1ON KF Mode
OFF MF/PF Mode.
2, 3Selection of PLO (Phase Locked Oscillator)
• When using the internal PLO of MP card:
0
0
ON
 







OFF
4
3
2
1
SWITCH NUMBER
FUNCTION
23
OFF OFF1.5 MHz clock
[For PN-24DTA/PN-24DTA-A]
ON OFF192 kHz clock 
[For PN-BRTA]
OFF ON2 MHz clock
[For PN-30DTC/PN-30DTC-A/
PN-2BRTC]
ON ON Not used 
						

							CHAPTER 4 ND-45504 (E)
Pag e 30
Revision 2.0
PN-CP00 (MP)
The figure in the SWITCH NAME column and the position in    in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
Note:Set the groove on the switch knob to the desired switch position.
Switch Settings  (Continued)
SWITCH NAMESWITCH 
NUMBERSETTING 
POSITIONFUNCTION CHECK
SW2 (Piano Key SW)
2, 3• When using the PLO card (PN-CK00):
SW2-2
 SW2-3
OFF ON
• When not using the internal PLO and the PLO card:
SW2-2
 SW2-3
OFF OFF
4Not used
JP0 (Jumper pin)
LEFT For factory testing
For normal operation
JP2 (Jumper pin)
For normal operation
Memory backup connected
DOWNFor factory test only
Disconnect battery
CAUTION
When the operating power is being supplied to this circuit card, do not plug/unplug this circuit card into/from its
mounting slot.
ON
OFF
4
3
2
1
OFF
Front
RIGHT
UP 
						

							ND-45504 (E) CHAPTER 4
Addendum-002 Page 31
OCTOBER, 1998 Revision 2.2
PN-CP00-B/PN-CP00-C (MP)
PN-CP00-B/PN-CP00-C (MP)
1. Locations of Lamps, Switches, and Connectors
PN-CP00-B/PN-CP00-C (MP) Card
2. Lamp Indications
Lamp Indications
LAMP NAME COLOR FUNCTION
RUN Green Flashes at 120 IPM while the circuit card is operating normally.
CLKIN Green Lights while receiving clock signals to the PLO oscillator.
SW3
RUN
SW1
SW2
CLKIN
JP0
RS
Note:Location of JP0 is different between CP00-B and CP00-C.
[CP00-B] Note
JP0 [CP00-C] Note 
						

							CHAPTER 4 ND-45504 (E)
Page 32 Addendum-002
Revision 2.2 OCTOBER, 1998
PN-CP00-B/PN-CP00-C (MP)
(3) Switch Settings
Switch Settings 
SWITCH NAMESWITCH 
NUMBERSETTING 
POSITIONFUNCTION CHECK
SW3 (Rotary SW)
Note0 ~ FOn Line (Call processing is in progress)
2Off Line (Call processing is stopped)
• I/O port: Depending on CM40 YY=08
3Off Line (Call processing is stopped)
• I/O port: 1200 bps (Fixed)
B For clearing the office data
C For setting the resident system program
1, 4 ~ 9
A, D ~ FNot used
SW1 (Push SW) For initializing the CPU
SW2 (Piano Key SW)
1ON KF Mode
OFF MF/PF Mode
2, 3Selection of PLO (Phase Locked Oscillator)
• When using the internal PLO of MP card:
0
0
ON
 











OFF
8
7
6
5
4
3
2
1
SWITCH NUMBER
FUNCTION
23
OFF OFF1.5 MHz clock 
[For PN-24DTA/PN-24DTA-A]
ON OFF192 kHz clock
[For PN-BRTA]
OFF ON2 MHz clock
[For PN-30DTC/PN-30DTC-A
/PN-2BRTC]
ON ON Not used