NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 847
Data Privacy on Demand - CCIS D-68
Service Conditions 
1. The following services are restricted while DATA PRIVACY ON DEMAND is activated. 
ATTENDANT CAMP-ON WITH TONE INDICATION [A-1]
ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS [A-45]
BUSY VERIFICATION [B-3]
BUSY VERIFICATION - CCIS [B-9]
EXECUTIVE RIGHT-OF-WAY - CCIS [E-8]
CALL WAITING-TERMINATING - CCIS [C-12]
CALL WAITING-ORIGINATING - CCIS [C-31]
If these features are...

NEAX2400 IMX Feature Programming Manual
Page 848ND-70184 (E), Issue 3
D-69 Data Transparency - CCIS
D-69 Data Transparency - CCIS 
General Description
This feature provides a DATA TRANSPARENCY path between nodes within the CCIS network for data
transmission using a Data Module or Dterm/ Data Adapter.
Operating Procedure
No manual operation is required.
Service Conditions
1. Upon data call origination or termination using a Data Module equipped DTE, certain character string
sequences relating to status...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 849
Deluxe Traveling Class Mark - CCIS D-70
D-70  Deluxe Traveling Class Mark - CCIS 
General Description
This feature provides call connection restrictions within the CCIS network. The following three types of restrictions
are allowed:
 Deluxe Traveling Class Mark Restriction 
 Route Restriction 
 Numbering Restriction 
Operating Procedure
Refer to the NEAX2400 IMX Office Data Specification.
Service Conditions
1. The Route Restriction...

NEAX2400 IMX Feature Programming Manual
Page 850ND-70184 (E), Issue 3
D-71 Dial Access to Attendant - CCIS
D-71  Dial Access to Attendant - CCIS 
General Description
This feature allows a user to access an Attendant Console through the CCIS network by dialing an Operator Call
Code. 
Operating Procedure
To access an Attendant Console: 
1. Dial the Operator Call Code; receive ringback tone. 
2. The ATND lamp on the Attendant Console flashes for INCOMING CALL IDENTIFICATION - CCIS.
3. The Attendant answers...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 851
Digital Display - Station - CCIS D-72
D-72 Digital Display - Station - CCIS
General Description
This feature provides the Attendant Console with a visual display of the telephone number, the Trunk Route
Restriction CLASS OF SERVICE [C-15], and tenant number during Attendant-to-Station connection within the
CCIS network.
Operating Procedure
The DIGITAL DISPLAY is automatically activated whenever the Attendant Console answers an...

NEAX2400 IMX Feature Programming Manual
Page 852ND-70184 (E), Issue 3
D-72 Digital Display - Station - CCIS
Service Conditions (cont’d)
Example 3: When five-digit station numbering is used, only the station number is displayed:
Note:
When the telephone number exceeds 6 digits, last 6 digits are displayed.
Interactions
1. CALL FORWARDING - CCIS [C-45, 46, 47]: Calls are forwarded from Station A to Station B. When the
Attendant extends a call to Station A, Station B’s number is indicated on the DIGITAL...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 853
Digital Display - Trunk - CCIS D-73
D-73  Digital Display - Trunk - CCIS
General Description
This feature provides a visual indication at the Attendant Console of incoming and outgoing trunk calls through the
CCIS network. Trunk Identification number, Trunk Route number, and tenant number or Central Office trunk code,
are displayed on a six-digit digital display.
Operating Procedure
The digital display is automatically activated...

NEAX2400 IMX Feature Programming Manual
Page 854ND-70184 (E), Issue 3
D-73 Digital Display - Trunk - CCIS
Service Conditions (cont’d)
Example 2: Trunk
Interactions 
1. For display purposes only, Route and Trunk numbers and Central Office Codes may be used
simultaneously in the same system and are applied on a per-route basis, via ARTD, CDN 25:R/L.
2. If System Data 1, Index 68 bit 2 is assigned for Individual Trunk Access to be the ACOC code, then all
trunks in all routes in the system must have the ACOC...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 855
Direct-In Termination - CCIS D-74
D-74 Direct-In Termination - CCIS
General Description
This service feature allows Inter-Office Direct-In Termination for a case where an incoming call addressed to a
station in a PBX from a C.O. line is to be terminated to a station belonging to a different PBX in the CCIS network.
Operating Procedure
1. A DIT call terminates to Node A.
2. The DIT call terminates to Node B through CCIS and rings...

NEAX2400 IMX Feature Programming Manual
Page 856ND-70184 (E), Issue 3
D-74 Direct-In Termination - CCIS
Service Conditions (cont’d)
7. If the station is assigned to a STATION HUNTING [S-7, 8, 9] group, the incoming call will follow the
hunt group station assignment. If the station is in CALL FORWARDING mode, the incoming call is
connected to the CALL FORWARDING target station.
8. Direct-In Termination trunks can be programmed to terminate elsewhere in the night mode.
9. DIRECT-IN TERMINATION must be...