NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 857
Distinctive Ringing - CCIS D-75
D-75 Distinctive Ringing - CCIS
General Description
This service feature allows Inter-Office Distinctive Ringing for a call terminated from a different PBX in the CCIS
network.
Operating Procedure
1. Station (c) and the Attendant in Node A are engaging in a call. 
2. The Attendant dials the number for Station (b); receives ringback tone. Station (c) receives Hold Tone,
and Station (b) is rung...

NEAX2400 IMX Feature Programming Manual
Page 858ND-70184 (E), Issue 3
D-75 Distinctive Ringing - CCIS
Programming
STEP 1:ASYD - System 1, Index 72, Bit 6.
Distinctive ringing only for DIT and DID calls. 
System 3, Index 0: Assign the timer value of the ringer used at the time of local line incoming. (ringer
pattern 0).
System 3, Index 1: Assign the timer values of the ringer used at the time of station call. (ringer pattern
1).
System 3, Index 3, Bit 0: 2 burst (0.4 sec-ON, 0.2 sec-OFF, 0.4 sec-ON)...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 859
Do Not Disturb - Dterm - CCIS D-76D
D-76D  Do Not Disturb - Dterm - CCIS
General Description
This feature allows a Dterm user to temporarily establish a DO NOT DISTURB status, during which time incoming
CCIS calls will be denied access to the MY-Line of the Dterm.
Operating Procedure
To set DO NOT DISTURB:
1. Press the DO NOT DISTURB (DND) key. The associated LED will light. The LCD displays:
To cancel DO NOT DISTURB:
1. Press the DO...

NEAX2400 IMX Feature Programming Manual
Page 860ND-70184 (E), Issue 3
D-76D Do Not Disturb - Dterm - CCIS
Interactions (cont’d)
2. CALL FORWARDING-BUSY LINE - CCIS [C-45]: This feature can be activated to an idle station that
has set DO NOT DISTURB - CCIS.
Programming
STEP 1:AKYD - When assigning key data for the Dterm, assign the following:
TN: 1
STN: Station Number
TP: Type of D
term 0/1: 
RING:
 0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 861
Data Hotline - CCIS D-86
D-86 Data Hotline - CCIS
General Description
This feature allows data stations to access Data Terminal Equipment (DTE) in a satellite office of a CCIS network,
by automatically dialing a SPEED CALLING-SYSTEM [S-3] number.
Operating Procedure
1. Manual CALL Origination via a Data Adapter: 
a.) Press the D
term DATA key
b.) The DATA lamp will flash and the calling Dterm will display the following:
2. Manual Call...

NEAX2400 IMX Feature Programming Manual
Page 862ND-70184 (E), Issue 3
D-86 Data Hotline - CCIS
Interactions (cont’d)
4. TOLL DIVERSION/TOLL DENIAL [T-6] and TOLL RESTRICTION-3/6 DIGIT [T-7] will not interact
with this feature if a station is allowed access to an ADC via Service Feature Class. 
5. This feature designates the use of a SPEED CALLING-SYSTEM [S-3] number when the DATA key is
activated.
6. UNIVERSAL SENDER [U-3] must also be provided.
Programming
STEP 1:ASDT - Assign the Data Terminal Number....

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 863
Data Hotline - CCIS D-86
Programming (cont’d)
STN: Hotline Station Number 
TYPE: Connection Type 
2: ADC
ADC: Speed Calling Code (2 or 3 digits) 
STEP 8:ADA2 - Assign Terminal Attribute Data 2, HL = 1 Hotline terminal connection. 
CDN: Counter Display Number 
13: HL (Hotline Terminal) 
HL: 0/1 
1: Hotline 

NEAX2400 IMX Feature Programming Manual
Page 864ND-70184 (E), Issue 3
D-91 Dialed Number Display - Recall - CCIS
D-91  Dialed Number Display - Recall - CCIS
General Description
When the Attendant Console makes an outgoing call to a CCIS line by means of a tandem connection, and the
Attendant has left the call by pressing the RELEASE button before the called Party answers, the Attendant Console
will be recalled if the Called Party does not answer. This service feature changes the display, when the Recall...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 865
Dialed Number Display - Recall - CCIS D-91
Operating Procedure (cont’d)
4. If, after a predetermined time has elapsed, Subscriber (a) is not connected with Station (b), the call isrecalled to the Attendant Console in Node A and it answers. Press the DEST key; the dialed number of
Station (b) is indicated. Station (b) continues to ring until the Attendant presses CANCEL Key.
Service Conditions
If the called party answers after the...

NEAX2400 IMX Feature Programming Manual
Page 866ND-70184 (E), Issue 3
D-93D Dual Hold Dterm - CCIS
D-93D Dual Hold Dterm - CCIS
General Description
This feature allows two connected Dterms to simultaneously be placed on non-exclusive hold over a CCIS link. This
enables the held parties to answer or originate a call from a sub-line appearance or the idle Prime Line. 
Operating Procedure
To place a call in DUAL HOLD - CCIS:
1. When two Dterms are connected via CCIS, either Dterm user can press the HOLD...