NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 797
Call Forwarding - Busy Line - CCIS C-46
Service Conditions (cont’d)
30. SPLIT CALL FORWARDING [S-99] is available only when the calling party is the station or the CCIS
line.
31. When a call terminates to a busy station setting CALL FORWARDING-BUSY LINE - CCIS, depending
on the calling station service restriction class, it can be selected to make the station busy (not to activate
Calling Forwarding-Busy Line) and to activate services...

NEAX2400 IMX Feature Programming Manual
Page 798ND-70184 (E), Issue 3
C-46 Call Forwarding - Busy Line - CCIS
Programming (cont’d)
STEP 3:ASPA - Assign an access code to CALL FORWARDING-BUSY LINE - CCIS entry, SID = 10 and to
CALL FORWARDING-BUSY LINE - CCIS cancel SID = 11. Assign Connection Status Index (CI)
for Normal (N) service.
STEP 4:ASFC - Assign a Service Feature Class that allows SFI = 9 to the stations receiving CALL
FORWARDING-BUSY LINE - CCIS. 
STEP 5:AKYD - For D
term sets, CALL...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 799
Call Forwarding - Don’t Answer - CCIS C-47
C-47  Call Forwarding - Don’t Answer - CCIS 
General Description
This service feature allows Inter-Office Call Forwarding-Don’t Answer for a case where the transferring station and
the transferred station respectively belong to a different PBX in the CCIS network.
Operating Procedure
When setting call FORWARDING-DON’T ANSWER Service:
1. Station A goes off-hook; receives dial tone.
2. Station...

NEAX2400 IMX Feature Programming Manual
Page 800ND-70184 (E), Issue 3
C-47 Call Forwarding - Don’t Answer - CCIS
Operating Procedure (cont’d)
6. Station A does not answer the call within a predetermined amount of time. The ringing at Station A stops
and the call is automatically transferred to Station B, which A has designated as the transfer destination;
Station B is rung.
7. Station B answers the call; Stations B and C are connected with each other.
When cancelling CALL FORWARDING-DON’T ANSWER Service:...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 801
Call Forwarding - Don’t Answer - CCIS C-47
Service Conditions
1. When CALL FORWARDING-DON’T ANSWER - CCIS is used, the following conditions exist: 
a.) Station A calls Station B. Station B is call forwarded to Station C. Station C is call forwarded to
Station D. Call forwarding does occur to Station D.
b.) Station A calls Station B. Station B is call forwarded to Station C. Station C is call forwarded to
Station D. Call forwarding...

NEAX2400 IMX Feature Programming Manual
Page 802ND-70184 (E), Issue 3
C-47 Call Forwarding - Don’t Answer - CCIS
Service Conditions (cont’d)
c.) A Central Office call is directed to Station B. Station B is call forwarded to Station C. Station C is
call forwarded to Station D. Call forwarding does occur to Station D.
d.) A Central Office call is directed to Station B. Station B is call forwarded to Station C. Station C is
call forwarded to Station D. Call forwarding does not occur to Station D. If Station...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 803
Call Forwarding - Don’t Answer - CCIS C-47
Service Conditions (cont’d)
10. If a station transfers a call to another station that has set CALL FORWARDING-DON’T ANSWER -
CCIS and releases from the call, recall service will override CALL FORWARDING-DON’T ANSWER
- CCIS if the call is unanswered after a predetermined time period (unless Blind Transfer station is in
service).
11. When calls are forwarded to the Attendant Console, the...

NEAX2400 IMX Feature Programming Manual
Page 804ND-70184 (E), Issue 3
C-47 Call Forwarding - Don’t Answer - CCIS
Interactions (cont’d)
4. CALL FORWARDING-DON’T ANSWER - CCIS to an Attendant Console will not operate when the
system is in Night Mode. If ATTENDANT NIGHT TRANSFER [A-19] is provided, the call is forwarded
to the ATTENDANT NIGHT TRANSFER station. 
5. If the CALL FORWARDING-DON’T ANSWER - CCIS target station is a D
term which has activated DO
NOT DISTURB [D-21D], call forwarding is not...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 805
Call Forwarding - Intercept - CCIS C-48
C-48  Call Forwarding - Intercept - CCIS
General Description
This feature allows calls to an inoperative number, through a CCIS trunk, to be intercepted and routed to a recorded
announcement. This announcement will inform the caller that an inoperative number was dialed and will give the
Listed Directory Number for information. 
Operating Procedure
This feature is set in system programming and...

NEAX2400 IMX Feature Programming Manual
Page 806ND-70184 (E), Issue 3
C-48 Call Forwarding - Intercept - CCIS
Programming (cont’d)
STEP 3:MBTK - Assign the Make Idle status to the Announcement Trunk. 
Note:
If supervision is required, use the first two circuits of the COT card. Move the switch on the COT card to PGT. 
STEP 4:ARRC - If TIE Line or REMOTE ACCESS TO PBX [R-2] connection to the Announcement Service
Trunk is required, allow trunk-to-trunk connection using ARI-D-RES, Direct Connection.
STEP...