NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 117
Call Forwarding - Busy Line - DtermC-2D
Service Conditions (cont’d)
b.) When the calling party is the attendant console or the night station, and the destination of the
CALL FORWARDING - BUSY LINE service is also the attendant console or the night station.
26. SPLIT CALL FORWARDING [S-99] is available only when the calling party is the station or the CCIS
line.
27. The OAI monitor number and the ACD pilot number cannot be assigned as...

NEAX2400 IMX Feature Programming Manual
Page 118ND-70184 (E), Issue 3
C-2D Call Forwarding - Busy Line - Dterm
Programming
STEP 1:ASYD - System Data 1, Index 5, Bit 0. Access codes for CALL FORWARDING BUSY LINE - Dterm
and CALL FORWARDING - DON’T ANSWER [C-3] are same or separate? 0/1: Same/Separate.
System Data 1, Index 69, Bit 5, Index 69, Bit 7.
STEP 2:ANPD - Reserve a number level for feature access and cancel. Assign for Normal (N), Hooking (H),
and BUSY (B). Assign NND in accordance with a...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 119
Call Forwarding - Don’t Answer C-3
C-3 Call Forwarding - Don’t Answer
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station, or to the Attendant,
when the called station doesnt answer after a predetermined time interval. If the individual Call Forwarding - Don’t
Answer timer is not assigned, the default timer assigned by system data programming is used.
Operating Procedure...

NEAX2400 IMX Feature Programming Manual
Page 120ND-70184 (E), Issue 3
C-3 Call Forwarding - Don’t Answer
Service Conditions (cont’d)
6. CALL FORWARDING - DONT ANSWER can be provided on either a tenant or an individual basis.
7. Individual CALL FORWARDING - DONT ANSWER takes precedence over tenant basis Call
Forwarding.
8. Call Forwarding on a tenant basis allows direct incoming trunk calls that encounter a Dont Answer
condition to be forwarded to a predetermined station or the ATTENDANT CONSOLE [A-3].
9....

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 121
Call Forwarding - Don’t Answer C-3
Service Conditions (cont’d)
20. When a call is forwarded through FCCS link, the numbering plan of the originally called station must be
identical with the one of the forwarded Attendant Console.
21. If individual Call Forwarding - Don’t Answer timer is not given, the default timer assigned by ASYD
command is used.
Interactions
1. If access codes for CALL FORWARDING-BUSY LINE and CALL FORWARDING-DON’T...

NEAX2400 IMX Feature Programming Manual
Page 122ND-70184 (E), Issue 3
C-3 Call Forwarding - Don’t Answer
Programming (cont’d)
STEP 2:ANPD - Reserve a number level for feature access and cancel. Assign Connection Index (CI) = N, H,
B; Normal, Hooking, and Busy (in order to be applicable to any feature assigned to this level). Assign
NND in accordance with a predetermined numbering plan.
STEP 3:ASPA - Assign an access code to CALL FORWARDING-DON’T ANSWER entry, SID = 12, and to
CALL FORWARDING-DON’T ANSWER...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 123
Call Forwarding - Don’t Answer - DtermC-3D
C-3D  Call Forwarding - Don’t Answer - Dterm
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station or to the Attendant,
if the called station does not answer within a predetermined period of time. CALL FORWARDING - DONT
ANSWER - D
term may be set or cancelled by the user for all multi-line appearances on the Dterm. Additionally, a...

NEAX2400 IMX Feature Programming Manual
Page 124ND-70184 (E), Issue 3
C-3D Call Forwarding - Don’t Answer - Dterm
Operating Procedure (cont’d)
5.  If t h e t a rg et  s ta ti on is  t h e A tt e nd an t,  t h e  LC D  d is p la y s:
To monitor CALL FORWARDING - DONT ANSWER for a multi-line appearance other than the MY Line:
1. Press the CALL FORWARDING - DONT ANSWER FORWARD-NA key. The LCD displays:
Target Station 
To cancel CALL FORWARDING - DONT ANSWER from MY Line:
1. Lift the handset or press the...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 125
Call Forwarding - Don’t Answer - DtermC-3D
Service Conditions (cont’d)
7. CALL FORWARDING - DONT ANSWER - Dterm may also be accessed via the dial pad or SPEED
CALLING - ONE TOUCH - Dterm [S-26D]. If this feature is accessed via the dial pad, it must be cancelled
via the dial pad.
8. CALL FORWARDING - DONT ANSWER - D
term is not applicable to CONSULTATION HOLD - ALL
CALLS [C-17], and CALL TRANSFER - ALL CALLS [C-11].
9. A user may set...

NEAX2400 IMX Feature Programming Manual
Page 126ND-70184 (E), Issue 3
C-3D Call Forwarding - Don’t Answer - Dterm
Service Conditions (cont’d)
b.) when a station holding an original call (station or trunk) on CONSULTATION HOLD [C-17]
places a call to a station setting CALL FORWARDING - DONT ANSWER.
13. Call Transfer - Attendant (Trunk): Trunk calls transferred by the Attendant are assigned this feature
according to Route Restriction Class of the trunk and the destination station when the station does not...