NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 321
LDN Night Connection L-28
Interactions
1. A maximum of 16 LDNs can be assigned per tenant, each with its own separate destination station. The
same destination may also be used for all LDNs.
2. STATION HUNTING-CIRCULAR [S-7] and STATION HUNTING-TERMINAL [S-9] are valid from
the night transfer destination station.
3. MULTIPLE CALL FORWARDING-ALL, BUSY, DON’T ANSWER [M-44, M-24, M-25] and
MULTIPLE CALL FORWARDING-ALL, BUSY, DON’T...

NEAX2400 IMX Business Features and Specifications
Page 322NDA-24221, Issue 3
L-30 LDN Night Connection - Outside
L-30  LDN Night Connection - Outside
General Description
This feature routes LOCAL DIRECTORY NUMBER (LDN) calls to a preselected station outside the system when
the system is in Night mode.
Operating Procedure
To answer LDN NIGHT CONNECTION calls (DID, TIE):
1. An incoming LDN call in Night mode is automatically routed to a preselected LDN NIGHT
CONNECTION station outside the system.
2. The...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 323
Meet-Me Paging M-1
M-1 Meet-Me Paging
General Description
This feature allows a user dial access to paging equipment, and connects both parties automatically, after the called
party has answered the page.
Operating Procedure
To page:
1. Calling station dials the Paging access code; receives continuous ringback tone for 1 second. 
2. Calling station pages the desired party. 
3. Calling station remains off-hook or hangs up.
To...

NEAX2400 IMX Business Features and Specifications
Page 324NDA-24221, Issue 3
M-1 Meet-Me Paging
Interactions (cont’d)
4. BUSY VERIFICATION [B-3] and EXECUTIVE OVERRIDE [E-1]: These features will be denied for a
connection that includes the Paging route.
5. DELAY OPERATION: Station A is connected to party B. Station A momentarily presses the switch hook
and dials the MEET-ME PAGE route access code. When connected to the page, Station A requests Station
C to dial the MEET-ME PAGE answer code. Station A...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 325
Miscellaneous Trunk Access M-2
M-2 Miscellaneous Trunk Access
General Description
This feature provides access to all types of external and customer provided equipment/facilities, such as FX [F-2],
WATS [W-1], CCSA [C-14], TIE LINE [T-3], and Exchange Network, along with DICTATION [D-3], PAGING
[P-1], and CODE CALLING [C-21].
Operating Procedure
MISCELLANEOUS TRUNK ACCESS is accomplished via System Data programming at the...

NEAX2400 IMX Business Features and Specifications
Page 326NDA-24221, Issue 3
M-3 Miscellaneous Trunk Restriction
M-3 Miscellaneous Trunk Restriction
General Description
This feature provides for certain stations and certain dial-repeating TIE trunks to be denied access to particular trunk
groups, such as FX [F-2], WATS [W-1], CCSA [C-14], TIE LINE [T-3], Exchange Network, DICTATION [D-3]
or PAGING [P-1].
Operating Procedure
MISCELLANEOUS TRUNK RESTRICTION is accomplished via system data programming at...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 327
Multiple Console Operation M-4
M-4 Multiple Console Operation
General Description
This feature allows one or more ATTENDANT CONSOLEs [A-3] to operate within the same system.
Operating Procedure
No manual operation is required.
Service Conditions
1. The maximum number of consoles per PIM is 4.
2. The maximum number of consoles allowable per system is:
1 IMG: 16
4 IMG/IMX-U: 60
3. Each incoming call is displayed on an ATTENDANT...

NEAX2400 IMX Business Features and Specifications
Page 328NDA-24221, Issue 3
M-4 Multiple Console Operation
Interactions (cont’d)
4. When more than one Attendant Console is installed, a Primary Attendant Console may be assigned
(AMAT command). This Attendant Console will control the implementation of DAY/NIGHT CLASS OF
SERVICE [D-15].
5. If the Primary Attendant places the system into Night mode, the Night LED on the other consoles do not
light. 

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 329
Music On Hold M-7
M-7 Music On Hold
General Description
This feature allows a party to hear music while in the CALL HOLD [C-6], CALL TRANSFER [C-10, 11], or
ATTENDANT CAMP-ON WITH TONE INDICATION [A-1] conditions.
Operating Procedure
No manual operation is required for this software controlled feature.
Service Conditions
1. The system is capable of supplying two switch-selectable music channels. Music is generated by 3...

NEAX2400 IMX Business Features and Specifications
Page 330NDA-24221, Issue 3
M-11 Meet-Me Paging - Attendant
M-11 Meet-Me Paging - Attendant
General Description
This feature allows an Attendant to hold an incoming call, page the called party, and connect the two after the called
party has answered the page.
Operating Procedure
Procedure 1:
To page:
1. Place the incoming call on hold by pressing the HOLD key. 
2. The Attendant seizes an idle loop. 
3. The Attendant dials the paging access code; receives...