NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 351
Multiple Call Forwarding - Don’t Answer M-25
Service Conditions (cont’d)
b.) The Attendant Console key that lights when a call is forwarded to the console depends on the
forwarding status of the originally called station (except in case c). The following table shows the
key that will light (e.g., if the forwarding status of the originally called station is CALL
FORWARDING - BUSY LINE [C-2], and the call is from a station, then...

NEAX2400 IMX Business Features and Specifications
Page 352NDA-24221, Issue 3
M-25 Multiple Call Forwarding - Don’t Answer
Interactions (cont’d)
2. Any UCD station is allowed to activate CALL FORWARDING-DON’T ANSWER [C-3]. When this
station sets CALL FORWARDING-DON’T ANSWER [C-3], calls directed to this station through UCD
hunting or directly-dialed will ring and then follow the destination of the CALL FORWARDING-DON’T
ANSWER [C-3].
3. CALL FORWARDING-DON’T ANSWER [C-3] to an Attendant Console will not...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 353
Message Center Interface M-26
M-26 Message Center Interface
General Description
This feature provides an interface to an external CPU for Message Center information when a specific UCD [U-1]
group or ATTENDANT CONSOLE [A-3] is called. This interface allows external control of Call Indicator Lamp
(Note) indications on equipped NEAX2400 IMX stations. This feature also provides a socket interface (LAN
interface) for connection to...

NEAX2400 IMX Business Features and Specifications
Page 354NDA-24221, Issue 3
M-26 Message Center Interface
Operating Procedure (cont’d)
5. The external CPU, upon receiving retrieved message information, will transmit a data record requesting
the NEAX2400 IMX to extinguish the Call Indicator Lamp of the corresponding station.
Service Conditions
1. The call type is sent to the external CPU via the MCI interface, this call record will pertain to the following
services:
ATTENDANT CAMP-ON [A-1]
AUTOMATIC...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 355
Message Center Interface M-26
Service Conditions (cont’d)
4. If the Host/CPU malfunctions and stops collecting call records, the NEAX2400 IMX can store up to 16
call records. If the maximum of 16 call records is stored and a 17th is generated, the system will write over
the oldest stored record, thus giving the stack the most recently generated call records.
5. MCI data will not be output when a hotline station is terminated to...

NEAX2400 IMX Business Features and Specifications
Page 356NDA-24221, Issue 3
M-26 Message Center Interface
Interactions
1. In case a Message Center exists on each side of the FCCS network and CCIS network:
a.) Message data will be transmitted to the MC on the side of the CCIS network (in the figure below,
MC#1), provided that a call from any of the FCCS network nodes (in the figure, node A/B/C)
terminates to an ATTCON/UCD station of the non-FCCS node (in the figure, node D).
b.) Message data will be...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 357
Message Center Interface M-26
Interactions (cont’d)
b.) The shared Message Center also can let the Message Waiting Lamps for both FCCS and non-
FCCS (CCIS) network stations go ON and OFF to inform the telephone user of the message
arrival.
3. In case the Message Center exists only on the side of CCIS network:
a.) Message data will be transmitted to the offered MC (in the figure below, assumed to be connected
to node D), given...

NEAX2400 IMX Business Features and Specifications
Page 358NDA-24221, Issue 3
M-26 Message Center Interface
Interactions (cont’d)
4. In case the Message Center exists only on the side of FCCS network:
a.) Message data will be transmitted to the offered MC (in the figure below, assumed to be connected
to node A), given that a call from the CCIS node (in the figure, node D) terminates to the
ATTCON/UCD station of any of the FCCS network nodes (in the figure, node A, B, C).
b.) The MC, though provided only...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 359
Message Waiting Lamp Setting - Station M-30
M-30  Message Waiting Lamp Setting - Station
General Description
This feature allows a station to set/cancel a Message Waiting indication or lamp. Any single line telephone or Dterm
can set/cancel Message Waiting indication to any single line telephone equipped with a 90v neon lamp, or a Dterm.
Note:Call Indicator Lamp on Dterm Series E is used as the Message Waiting Lamp.
Operating...

NEAX2400 IMX Business Features and Specifications
Page 360NDA-24221, Issue 3
M-30 Message Waiting Lamp Setting - Station
Operating Procedure (cont’d)
To cancel a Message Waiting Indication from a Dterm or MY Line:
1. Lift the handset or press the SPEAKER key; receive dial tone.
2. Press the Message Waiting Cancel line/feature key, receive special dial tone. 
3. Dial the desired telephone number; the LCD displays, and service set tone is heard.:
4. Message Waiting indication is cancelled.
Service...