NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 341
Message Waiting Lamp Setting - Attendant M-23
M-23  Message Waiting Lamp Setting - Attendant
General Description
This feature permits an ATTENDANT CONSOLE [A-3] to set or cancel a Message Waiting indication on a station
provided with this feature.
Operating Procedure
To set a Message Waiting indication:
1. Press an idle loop key. 
2. Dial the Message Waiting set code (up to 3 digits); receive special dial tone.
3. Dial the...

NEAX2400 IMX Business Features and Specifications
Page 342NDA-24221, Issue 3
M-23 Message Waiting Lamp Setting - Attendant
Service Conditions (cont’d)
7. When Call Indicator Lamp (Note) is controlled by MESSAGE WAITING LAMP SETTING - STATION
[M-30], the tone and display indication of the Attendant Console and Call Indicator Lamp of the station
are as follows, depending on the status of the station.
Interactions
1. For MESSAGE WAITING LAMP SETTING-ATTENDANT, an 8DLC/16ELC card is required.
2. An external...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 343
Multiple Call Forwarding - Busy Line M-24
M-24  Multiple Call Forwarding - Busy Line
General Description
This feature permits a call to a busy station to be forwarded, a maximum of five times, to preprogrammed idle
stations.
Existing CALL FORWARDING - BUSY LINE [C-2] service
MULTIPLE CALL FORWARDING - BUSY LINE [M-24] service
Operating Procedure
To set CALL FORWARDING - BUSY LINE [C-2] from an individual station:
1. Lift the...

NEAX2400 IMX Business Features and Specifications
Page 344NDA-24221, Issue 3
M-24 Multiple Call Forwarding - Busy Line
Operating Procedure (cont’d)
5. Dial the desired target telephone number; receive service set tone.
To cancel CALL FORWARDING - BUSY LINE [C-2] from the ATTENDANT CONSOLE [A-3]: 
1. Press an idle loop key. 
2. Dial the CALL FORWARDING - BUSY LINE [C-2] cancel code; receive special dial tone.
3. Dial the TENANT [T-12] number (2 or 3 digits).
4. Dial the originating telephone number;...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 345
Multiple Call Forwarding - Busy Line M-24
Service Conditions (cont’d)
e.) If a forwarding destination is the originally called station, and if the originally called station
forwarded the call with CALL FORWARDING - BUSY LINE, the ultimate destination is the
originally called station.
f.) If the call is forwarded to a station where it has previously been forwarded to, the call will end at
that station.
6. CALL FORWARDING - ALL...

NEAX2400 IMX Business Features and Specifications
Page 346NDA-24221, Issue 3
M-24 Multiple Call Forwarding - Busy Line
Service Conditions (cont’d)
b.) The Attendant Console key that lights when a call is forwarded to the console depends on the
forwarding status of the originally called station. The following table shows the key that will light
(if the forwarding status of the originally called station is CALL FORWARDING - BUSY [C-2],
and the call is from a station, then the BUSY key will light).
c.) If...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 347
Multiple Call Forwarding - Busy Line M-24
Service Conditions (cont’d)
11. Busy Services such as EXECUTIVE OVERRIDE [E-1], CALL BACK [C-1], etc.:
a.) Busy service is provided to the busy line closest to the originally called station.
12. DIT, NIGHT CONNECTION - FIXED [N-1]:
a.) For CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING - BUSY LINE [C-
2], a forward check is made up to 5 times by System Data.
b.) In DIRECT-IN...

NEAX2400 IMX Business Features and Specifications
Page 348NDA-24221, Issue 3
M-24 Multiple Call Forwarding - Busy Line
Interactions (cont’d)
5. If an Attendant attempts BUSY VERIFICATION [B-3] to Station A, which has CALL FORWARDING-
BUSY LINE [C-2] set to Station B and Station B is busy, BUSY VERIFICATION [B-3] proceeds against
Station B. If Station A has set CALL FORWARDING-BUSY LINE [C-2] to the Attendant Console,
BUSY VERIFICATION [B-3] is allowed at Station A, if Station A is busy.
6. When CALL...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 349
Multiple Call Forwarding - Don’t Answer M-25
M-25 Multiple Call Forwarding - Don’t Answer
General Description
This feature permits a call to an unanswered station to be forwarded, multiple times, to preprogrammed idle stations
that do not have Call Forwarding set.
Operating Procedure
To set CALL FORWARDING - DONT ANSWER [C-3] from an individual station: 
1. Lift the handset; receive dial tone.
2. Dial the specific CALL...

NEAX2400 IMX Business Features and Specifications
Page 350NDA-24221, Issue 3
M-25 Multiple Call Forwarding - Don’t Answer
Service Conditions (cont’d)
d.) If the forwarding sequence, after a CALL FORWARDING - DONT ANSWER [C-3] goes
through several stations with CALL FORWARDING - ALL CALLS [C-5] set and ends up at the
original CALL FORWARDING - DONT ANSWER [C-3] station, CALL FORWARDING -
DONT ANSWER [C-3] is not activated.
e.) If the forwarding sequence, after a CALL FORWARDING - DONT ANSWER [C-3] goes...