NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 361
Message Waiting Lamp Setting - Station M-30
Service Conditions (cont’d)
7. The LCD on the Dterm Series E station displays the following messages:
Interactions
1. For MESSAGE WAITING LAMP SETTING-STATION, the 8DLC/16ELC card is required.
2. An external power source is required to light a single line telephone lamp. The nondisplay  D
terms use an
80 VDC power source. NEC stocks Lorain Model HSA3H.
3. The use of the following...

NEAX2400 IMX Business Features and Specifications
Page 362NDA-24221, Issue 3
M-30 Message Waiting Lamp Setting - Station
Interactions (cont’d)
4. When an incoming call is answered by the sub-line appearance on another station, the following services
may be activated either by the answering station or by another station towards the answering station. These
services will not interfere with the answering station’s ability to leave a Message Waiting indication. 
PRIVACY-D
term[P-14D]
CONSULTATION HOLD-ALL...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 363
Multiple Call Forwarding - All Calls M-44
M-44  Multiple Call Forwarding - All Calls
General Description
This feature permits a call to a CALL FORWARDING - ALL CALLS station to be forwarded multiple times to a
predesignated idle station.
Operating Procedure
To set MULTIPLE CALL FORWARDING - ALL CALLS [C-5] from an individual station:
1. Lift the handset; receive dial tone. 
2. Dial the specific CALL FORWARDING - ALL CALLS...

NEAX2400 IMX Business Features and Specifications
Page 364NDA-24221, Issue 3
M-44 Multiple Call Forwarding - All Calls
Service Conditions (cont’d)
c.) If a sequence of CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING -
BUSY LINE [C-2] forwards the call back to the originating station, the forward is not made and
the caller hears a busy tone.
d.) If a sequence of CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING -
BUSY LINE [C-2] forwards the call back to the originally called station, and if...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 365
Multiple Call Forwarding - All Calls M-44
Service Conditions (cont’d)
b.) The Attendant Console key that lights when a call is forwarded to the console depends on the
forwarding status of the originally called station (except in paragraph c). The following table
shows the key that will light; e.g., the BUSY key will light, if the forwarding status of the
originally called station is CALL FORWARDING - BUSY LINE [C-2], and the...

NEAX2400 IMX Business Features and Specifications
Page 366NDA-24221, Issue 3
M-44 Multiple Call Forwarding - All Calls
Service Conditions (cont’d)
b.) If a call is forwarded by CALL FORWARDING - BUSY LINE [C-2] to stations that are
members of hunting groups, a hunting check is performed on the busy line closest to the called
station, or on the busy line closest to the final forward destination. In the diagram below, a
hunting check is performed on Hunt Groups 1 or 4. A hunting check is never performed...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 367
Multiple Call Forwarding - All Calls M-44
Interactions (cont’d)
4. When a station in a STATION HUNTING [S-7, 8, 9] group initiates MULTIPLE CALL FORWARDING-
ALL CALLS, calls normally destined for this station will not be received. The hunt group operates as if
the station were busy. 
5. A noncontrolling UCD station is allowed to activate CALL FORWARDING [C-5]. With this station call
forwarded, only calls dialed directly to this...

NEAX2400 IMX Business Features and Specifications
Page 368NDA-24221, Issue 3
M-47 Manual Signaling
M-47 Manual Signaling
General Description
This feature permits Dterm users to send a one-second ring to a predetermined station. The manual intercom SIGNAL
key (SIG key) is operational at all times. An Intercom call is not required. If the signalled station is ringing from
another call, the manual intercom signal will interrupt that ringing.
Operating Procedure
Press the SIG key; send a one-second ring to...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 369
Multi Channel Recording - DAT M-48
M-48  Multi Channel Recording - DAT
General Description
This feature allows a user to record a message to multiple Digital Announcement Trunks (DATs) in a single
operation. The message recorded in a trunk is automatically copied to other trunks one after another.
Operating Procedure
1. Recording by designating RT and TK:
a.) Lift a handset; receive dial tone.
b.) Dial the MULTI CHANNEL...

NEAX2400 IMX Business Features and Specifications
Page 370NDA-24221, Issue 3
M-48 Multi Channel Recording - DAT
Operating Procedure (cont’d)
b.) Dial the MULTI CHANNEL RECORDING (REPLAY) access code from the station; receive
special dial tone.
c.) Enter Route Number and Trunk Number; the special dial tone stops.
d.) A recorded message of the designated trunk is automatically played back.
e.) Replace the handset to finish playback of the recorded message.
Note:Even though recording of a message has been...