NEC Neax 2000 Ivs2 Isdn System Manual

 NEAX2000 IVS2 ISDN System ManualPage 120  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
DESCRIPTION DATA
Specify the number of digits to be received 
on DID.
(1)
(2)YY=09 Incoming Connection Signaling
00-63: B channel Trunk Route No. 
08: ISDN Indial  
NOTE 1
NOTE 1:This data should be assigned to 
the B channel trunk route.  For 
D channel trunk route, no data 
setting is required.
(1)
(2)YY=16 
Hooking Signal Sending to outside
00-63: B channel Trunk Route...

CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 121
DESCRIPTION DATA
When the data for CM35 YY=18 is set to 
“0” (Received digits conversion is to be 
provided), assign the data for interpreting 
the digits received.
Terminate BRI trunks to a station for 
testing.•



(1)
(2)YY=01 Day Mode
YY=02 Night Mode
YY=03 Mode A
YY=04 Mode B
000-999: Number Conversion Block 
No. assigned by CM76 Y=00
X-XXXXXXXX: Station No. to...

 NEAX2000 IVS2 ISDN System ManualPage 122  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
Home-Side Trunk Programming
DESCRIPTION DATA
Assign a trunk number to each channels 
on the Home-Side trunk.
NOTE:The Virtual channel number on 
the Home-Side trunk must be an 
even number (00, 02, 04, ... 30).
(1)
(2)YY=05
3200-3230: Virtual channel No. 00-30 
(Even No.) of the Home-
Side Trunk
D000-D255: Trunk No.
Trunk No. already assignment by CM10 
should not be used....

CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 123
DESCRIPTION DATA
Assign a CCIS channel number to each 
common signaling channel and voice 
channel route.
(1)
(2)YY=91
00-63: Trunk Route No.
0-7: CCIS Channel No.
Specify the voice channel and common 
signaling channel route as the Event 
Based CCIS route.
(1)
(2)YYY=135
00-63: Trunk Route No.
0: Event Based CCIS Route
Select trunk seizure sequence. (1)
(2)078
1 :...

 NEAX2000 IVS2 ISDN System ManualPage 124  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
Mate-Side Trunk Programming 
DESCRIPTION DATA
Assign a trunk number to each channel on 
the Mate-Side trunk.
NOTE:The Virtual channel number on 
the Mate-Side Trunk must be an 
odd number (01, 03, 05, ... 31).
(1)
(2)YY=05
3201-3231: Virtual channel No. 01-31 
(Odd No.) of the Mate-Side 
Trunk
D000-D255: Trunk No.
Assign a trunk route number to each trunk.
(1)
(2)YY=00...

CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 125
DESCRIPTION DATA
Specify the voice channel and common 
signaling channel route as the Event 
Based CCIS route.•
(1)
(2)YYY=135
00-63: Trunk Route No. 
0: Event Based CCIS Route
Specify which number is adopted for 
sending CCIS channel number of virtual 
trunks between the offices, either 
subaddress number or ISDN Indial dialed-
in digits.
(1)
(2)YYY=143
00-63: Trunk...

 NEAX2000 IVS2 ISDN System ManualPage 126  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
• To provide Verification of Connection for Event Based CCIS, do the following programming.
The following data must be set on the opposite PBX identically. 
See also the data setting example on the following pages.
NOTE 1:This feature is available only for the connection between the NEAX2000 IVS
2/7400ICS
M100MX’s. The same programming must be set on the opposite office.
NOTE...

CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 127
Figure 3-3 shows an example of the programming for verification of connection.
Figure 3-3  Verification of Connection
STATION TRK No. 000
TRK RT No. 00
TRK No. 200
TRK RT No. 20
TRK No. 100
TRK RT No. 10
VIRTUAL TRUNK
(HOME-SIDE)
VIRTUAL TRUNK
(MATE-SIDE)
CCHISDN TRUNK
(BRT/DTI/PRT)
TRK No. 001
TRK RT No. 01
TRK No. 201
TRK RT No. 21
TRK No. 101
TRK RT No. 11
VIRTUAL...

 NEAX2000 IVS2 ISDN System ManualPage 128  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
Programming example for PBX A shown in Figure 3-3.
CM35 YYY=152 (1) 20: Mate-Side trunk route number for common signaling channel
(2) 0: Provide Verification of Connection.
(1) 21: Mate-Side trunk route number for voice channel
(2) 0: Provide Verification of Connection.
CM50 YY=06 (1) 200: Mate-Side trunk number for common signaling channel
(2) 9725556700: ISDN subscriber...

CHAPTER 3  SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 129
Programming example for PBX B shown in Figure 3-3.
CM35 YYY=152 (1) 20: Mate-Side trunk route number for common signaling channel
(2) 0: Provide Verification of Connection.
(1) 21: Mate-Side trunk route number for voice channel
(2) 0: Provide Verification of Connection.
CM50 YY=06 (1) 200: Mate-Side trunk number for common signaling channel
(2) 9725557800: ISDN...