NEC Neax 2000 Ivs2 Isdn System Manual

 NEAX2000 IVS2 ISDN System ManualPage 100  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN-VPN Programming
DESCRIPTION DATA

(1)
(2)YYYY=9000-9025: Digit Addition Pat-
tern No. 00-255
0
X-X...X: Digits to be added (Max. 32 
digits)
To delete the designated digit of an area 
code assigned by YYYY=4000-4007.
(1)
(2)YYYY=5000-5255
153: Designation of digit to be deleted 
from area code assigned by 
YYYY=4000-4007
00 : No digit deletion
01-10: Leading 1-10 digits deletion
 
CCC : No digit...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 101
ISDN TERMINAL DATA PROGRAMMING
 ILC Assignment 
DESCRIPTION DATA
Assign an ISDN line station number to the 
required LEN.(1)
(2)000-763: LEN
EFX-EFXXXXXXXX: ISDN Line Station 
No.
Assign a Tenant number to each ISDN line 
station number.
(1)
(2)YY=04
X-XXXXXXXX: ISDN Line Station No.
00-63: Tenant No.
If no data is set, the default data is 01.
Assign a Trunk...

 NEAX2000 IVS2 ISDN System ManualPage 102  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
DESCRIPTION DATA
Specify the facility control of CPN (Calling 
Par ty Number).
(1)
(2)YY=25
X-XXXXXXXX: ISDN Line Station No.
0 : Provided
1 : Not provided
Assign the digit number of ISDN line 
station number.
(1)
(2)Y=0-3
X-XXXX: Access Code
801-808: 1 digit-8 digits
Specify whether the subaddress is sent to 
ISDN when making a call from ISDN 
Terminal, if required.(1)...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 103  
ICH Assignment 
DESCRIPTION DATA
Assign an AP number to each ICH card 
(PN-SC03). The AP number must match 
the SENS switch setting on the ICH card.
(1)
(2)Y=0
04-15: AP No.
13: ICH card
Assign the ICH number to the AP number 
of ICH assigned by CM05.
(1)
(2)YY=09
00-15: ICH No.
04-15: AP No. assigned by CM05
Assign the ISDN line station number to the 
ISDN line...

 NEAX2000 IVS2 ISDN System ManualPage 104  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
Point-to-Point Connection
DESCRIPTION DATA
Assign the point to point connection as the 
Layer 2 data link.
(1)
(2)YY=01
XX Z
XX: 00-15: ICH No.
Z : 0-7: ISDN Line No. of ICH card
0: Point to Point Connection
NOTE:When Point-to-Point Connection is selected, the PBX will address the BRI Terminal 
with channel select (B1/B2) message. Some BRI Terminals cannot answer the call...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 105
Point-to-Multipoint Connection
DESCRIPTION DATA
Assign the point to multipoint connection 
as the Layer 2 data link.
(1)
(2)YY=01
XX Z
XX: 00-15: ICH No.
Z : 0-7: ISDN Line No. of ICH card
1 : Point-to-Multipoint Connection
Specify the passive bus.
(1)
(2)YY=03
XX Z 
XX: 00-15: ICH No.
Z : 0-7: ISDN Line No. of ICH card
0 : Extended Passive Bus 
1 : Short Passive...

 NEAX2000 IVS2 ISDN System ManualPage 106  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
BRI Programming Example:
The following is an example of common BRI Station Programming.
CM10024>EF2125
025>EF2126
CM AC00>000-2125
001-2126
CM
CM
CM
CM
CMAC01>000-1
001-1
AC02>000-1
001-1
AC03>000-1
001-1
AC04>000-1
001-1
AC06>000-1
001-1CM1B>2125, 0>2225*
2125, 1>2226
2
>None
7
2126, 0>2235*
2126, 1>2236*
2
>None
7
* Ext. 2225 and others assigned in CM1B are the
Extension...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 107
Individual Terminal Call 
(1) ISDN Indial
When receiving an ISDN Terminal station number as the ISDN Indial number, or when
converting an ISDN Indial number to an ISDN Terminal station number, by CM76, the
system connects the call with the specified ISDN Terminal or Terminal Adapter (TA) on the
same bus (2B + D).
Do the following programming:
DID Addressing  (See Page...

 NEAX2000 IVS2 ISDN System ManualPage 108  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
(2) Called Par ty Subaddress
When the system has received a Called Party Subaddress (ISDN Terminal station number)
from an ISDN Subscriber, the system connects the call with the specified ISDN Terminal or
TA on the same bus (2B + D).
Do the following programming:
Subaddress-Present   (See Page 89.)
Point-to-Multipoint Connection   (See Page 105.)
ISDN
ISDN Terminal
Station...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 109
(3) Direct In Termination (DIT)
When the ISDN Terminal station number is assigned as the destination of DIT, the system
connects the call with the specified ISDN Terminal or TA on the same bus (2B + D).
In addition to the programming of Point-to-Multipoint Connection on Page 105, do the
following programming:
DESCRIPTION DATA
Assign the data for DIT to the trunk...