NEC Neax 2000 Ivs2 Isdn System Manual

 NEAX2000 IVS2 ISDN System ManualPage 80  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN-BRI Programming
 When providing Tandem Connection (COT/ODT/LDT/DTI to ISDN, ISDN to COT/ODT/LDT/
DTI), do the following programming:
DESCRIPTION DATA
Specify whether the busy tone is sent to a 
calling party of ISDN when a called party 
is busy in the tandem connection (ISDN to 
COT).(1)
(2)407
0 : Available (BT)
1 : Not available (RBT)
Specify the combination of trunk routes 
allowing the tandem...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN-BRI Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 81
 When providing Tandem Connection (ISDN to CCIS, CCIS to ISDN), do the following
programming:
 Specify whether the Calling Party Number (CPN) sent from ISDN is sent to the CCIS
network.
DESCRIPTION DATA
Specify the combination of trunk routes 
allowing the tandem connection.
(1)
(2)Y=0
XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ : 00-63: Outgoing Trunk Route
0 : Allowed
1:...

 NEAX2000 IVS2 ISDN System ManualPage 82  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Feature Programming
ISDN FEATURE PROGRAMMING
 Calling Party Recognition Service (Direct-In Termination (DIT))
Refer to “Direct Inward Termination (DIT)” in the Feature Programming Manual.
 DID Addressing    (See Page 83.)
MEGACOM
® Access [North America Only]   (See Page 85.)
MEGACOM
® 800 Service [North America Only] 
Refer to “DID Addressing” for programming instructions.   (See Page 83.)
 SID...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Feature Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 83
DID Addressing
DESCRIPTION DATA
Assign the data for DID to the trunk 
numbers assigned by CM07. 



(1)
(2)YY=02 Day Mode
YY=03 Night Mode
YY=40 Mode A
YY=41 Mode B
000-255: Trunk No. assigned by CM07 
YY=01
18: ISDN Indial
Assign the data for DID to the trunk routes 
assigned by CM30.
(1)
(2)YY=00 Kind of Trunk
00-63: Trunk Route No.
00: DID

(1)
(2)YY=02 OG/IC
00-63:...

 NEAX2000 IVS2 ISDN System ManualPage 84  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Feature Programming
DESCRIPTION DATA

(1)
(2)YY=18 Received Digit Conversion
00-63: Trunk Route No.
0 : Provided
1 : Not provided 
Assign the destination of DID Call 
transferred when the station is busy/
unassigned/no answer. 


(1)
(2)YY=00 No Answer
YY=03 Busy
YY=06 Unassigned
00-63: Tenant No.
Destination:
X-XXXXXXXX: Station No.
E000 : Attendant Console
EBXXX: Announcement Service:
Digital...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Feature Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 85
MEGACOM® Access
[North America Only]
In addition to the programming of Direct Outward Dialing, assign WATS line to the required trunk
route, as shown below:
DESCRIPTION DATA
Assign the Trunk Restriction Class to each 
station.
(1)
(2)YY=01 Trunk Restriction Class
X-XXXXXXXX: Station No.
XZ
X: 1 -8: Trunk Restriction Class in Day 
mode
Z: 1 -8: Trunk Restriction Class in...

 NEAX2000 IVS2 ISDN System ManualPage 86  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Feature Programming
SID to Network-Present/
CPN to Network-Present
For providing the Calling Party Number (CPN)
to the network, do the following programming:
 When Dial-In service is provided:
 When ISDN (BRI) Terminals are used:
DESCRIPTION DATA
Assign an ISDN Subscriber number and 
ISDN Local Office Code Table number to 
required stations.  
NOTE 1

(1)
(2)YY=12
X-XXXXXXXX: Station No.
X-XXXX:...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Feature Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 87
NOTE 1:The ISDN number consists of the following numbers:
ISDN number: XXXXXXXXXXXX YYYY
ISDN subscriber No. assigned by CM12 
YY=12 (1-4 digits)
ISDN Local Office Code assigned by 
CM50 YY=05 (1-12 digits)
This number must be in the indial range assigned by Telecom for the ISDN line.
For example:
National Destination Code for Dallas: 214
Local Code for a station: 518-5000
In...

 NEAX2000 IVS2 ISDN System ManualPage 88  ND-70919 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Feature Programming
 When Dial-In service is not provided:
DESCRIPTION DATA
Specify the sending out of CPN (Calling 
Par ty Number).
(1)
(2)YY=25
X-XXXXXXXX: Station No.
0 : Sent
1 : Not sent
Assign an ISDN subscriber number to 
each ISDN trunk.
NOTE 1 on previous page
(1)
(2)YY=19
000-255: Trunk No. assigned by CM07 
YY=01
XXXX: ISDN Subscriber No.
Assign ISDN Local Office Code Table 
number to...

CHAPTER 3  SYSTEM DATA PROGRAMMING
ISDN Feature Programming
NEAX2000 IVS2 ISDN System Manual    
ND-70919 (E), Issue 1.0   Page 89
Subaddress-Present
(1) Calling Party Subaddress
When a station has dialed an ISDN 
subscriber number, the station number is 
automatically sent as a Calling Party 
Subaddress.
(2) Called Par ty Subaddress
When the system has received a 
Called Par ty Subaddress (Calling 
Station Number) from an ISDN 
subscriber, the system connects the 
call with the specified terminal....