Mitel Voice Processing Solutions Installation And Service Manual

Enhanced In-band Integration Menu ParametersInteractions & Limitations This adds or subtracts without producing anyaddition carry or subtraction borrow. It is normally used to make a three-digit
extension into a four-digit mailbox number, or vice-versa.For example, if an
extension is 234 and the signed offset is 
+lOOO, the result is 1234.
Calling Extension Absorbed DigitsLocation in Menus In-band Integration Menu
What to Enter The number of leading input digits to absorb from the calling
extension. The...

Enhanced In-band Integration Menu Parameters
CommentLocation in Menus In-band Edit Template Menu
What to Enter Comments to help the user’s understanding of the application
template. Comments can be a maximum of 128 characters long.
Default Blank
Current TemplateLocation in Menus In-band Edit Template Menu
What to Enter The number of the template that you wish to modify or
create.Default Template 1
How It Works This selects the template to edit in the integration application
(for example, template 3 of...

Enhanced In-band Integration Menu Parameters
Table 2-2Valid Data Field Entries
Data
o-9, *,#A-D

Enhanced In-band Integration Menu ParametersTable 2-3Valid Error Action Field Entries
Error Action
D#H
T
Wn
wnvo
Vlv2
v3
v4
V5* The systemw
enabled.Description
Dial DTMF digits 
n, (O-9, A-D) max 23
Hang-up
Go off-hook
Wink 
n/l OS of a second
Wait n/l 
OS of a second
Play 
login prompt with passcode required
Play 
login prompt, passcode optional *
Play Forward All greeting
8,Play Ring No Answer greeting
Play Busy Forward greeting
Play General greeting (Auto Receptionist or
Message Center greeting)
not...

Enhanced In-band Integration Menu Parameters
(host), and then use the “Number...”parameter to set the number of tasks for
the module. Repeat the procedure for each module that has phone ports
assigned to an Enhanced In-band line group.Interactions & Limitations This parameter is only required for VoiceMemoReleases 5.02 and 5.03 software. Release 5.04 configures the number of tasks
per module automatically.
See Also Number of 
Inband Tasks on This Host
Install ApplicationLocation in Menus Enhanced In-band...

Enhanced In-band Integration Menu Parameters
MF EnableLocation in Menus In-band Integration Menu
What to Enter Yes to enable MF signaling or No to disable.
Default No (MF signaling disabled)
How It Works When enabled, this parameter tells 
VoiceMemo to expect MF
signaling from the switching system. Some switches and 
PBXs use Multi-frequency (MF) signaling, others use Dual Tone Multi-Frequency (DTMF)
signaling. The 
VoiceMemo system only looks for one type of signaling during
call setup, therefore you...

Enhanced In-band Integration Menu ParametersHow It Works This parameter works with the Host Number parameter to set
the amount of system CPU resources assigned to an Enhanced In-band
Integration. First select a module (host), and then use this parameter to set the
number of tasks for the module. Repeat the procedure for each module that
has phone ports assigned to an Enhanced In-band line group.
Tips 
& Techniques A good rule of thumb for determining the correct
number of in-band tasks for each module is...

Enhanced In-band Integration Menu Parameters
Show ApplicationLocation in Menus Enhanced In-band Menu
What to Enter No entry required.
Other Requirements This option shows all information about the current
application, including the application name and description, its installation
date and last modification date, and all of its templates.
Tips 
& Ted&qua Use this option to see all of an application’s templates at
once, especially before editing the application.
Show Number of In-band Tasks on Each...

List of Detailed Procedures
Page 1 of 1
Procedure
NumberDP 3021
DP 5402
DP 6028
DP 6034
DP 7006
DP 7007
DP 7010
DP 7011
DP 7016
DP 7022
DP 7023
DP 7501
TitleConnect the Chassis Ground to the 
Rack-Mount 
VoiceMemo System
Perform an Online Optional Feature
InstallationDefine a Line Group for Applications
Add or Delete Receptionist II Extensions
Assign the Enhanced In-band Integration
Application to a Line Group
Configure In-band Digit Absorption and
. .Signed Offset
Install an Enhanced In-band...

list of General ProceduresPage 1 of 1
Procedure
NumberGP502
GP504
GP505
GP506GP507
GP 508
GP509
TitleConfigure an Enhanced In-band Integration
Configure Omni Integration
Configure Fujitsu 
Starlog Integration
Configure AT&T System 25 Integration
Configure Northern Telecom 
NorstarIntegration
Configure AT&T Legend Integration
Configure Northern Telecom MTX
’Integration
Release
Number5.03
5.03
5.03
5.03
5.03
5.03
5.03